Using Parallels with Windows 7 on Bootcamp caused startup logo to disappear
Please let me know whether this is just neurotic or what! Windows 7 RC on Bootcamp partition worked great until I installed a trial copy of Parallels 5.0. Even with Parallels, things seemed fine, but I did not like some behaviors of the program when run under Parallels. Using Parallels, I was leery about the issue that when I clicked on the icon of the E-drive (the Macintosh hard drive), I kept getting the message that it needed to be formatted. Certainly I was able to access the files of the MacIntosh through shared folders, and by dragging files from desktop to desktop, but I saw very little advantage of for running Parallels for what I do with the Windows programs, and I did not want to mess up the Macintosh hard drive by an accidental reformat while using Windows. Also I like the fact that if I start Windows from the Bootcamp partition rather than access it via Parallels, Windows is physically well isolated from MacOSX, I do not really have a chance to delete or mess up the Mac hard drive, and at the same time one can access the Mac OSX disk for files that might be needed by dragging these into the Windows partition. Parallels just seemed unneeded.
Now that I have uninstalled Parallels from the Mac partition and have uninstalled the Parallels programs and tools on the Windows partition, I still have a strange phenomenon that first showed itself when I had first installed the Parallels 5.0 program. Specifically, since the very day that Parallels first was installed and the bootcamp partition was used as the hard drive for Windows run under Parallels, and now even after uninstalling Parallels, the behavior of the Windows flag logo and startup graphics have been changed. A progress bar that previously did not exist before I used Parallels appears on startup, and the moving colored pieces of the Windows flag logo that are supposed to come together as Windows 7 is booted now do not appear during startup.
To my best knowledge, besides uninstalling Parallels programs, I have also removed manually all parts of Parallels that I can find from Windows, and I even excised hidden files and folders of Parallels found on the C drive. I also sought out PRL files from the Windows partition. I uninstalled and physically removed a program called Stardust (?)... Starcolor (?) or something like that, which was installed at the time Parallels was installed. Folders for this had icons of Macintosh programs. Additionally tried to remove all Parallels, PRL, and Stardust items also from the registry, but there are stubborn ones that are in the "pnp Lockdown files", and some others there that also fail to remove elsewhere. The Lockdown files that do not remove are Parallels files involved in booting, and the others are for a PRL 4600 monitor (???). I was able to remove PRL files in the "Driver Store" folder by changing permissions, and then these were able to be removed. I see no settings anywhere for startup logos in msconfig or when I search through programs in the control panel or in the Windows system folder. I have emptied temporary folders, Prefetch, and have used Windows Live Safety Center to remove stray registry files and to fix issues.
Attempts to go back to an old restore point do not work and do not get me back to the Windows 7 installation that i used to have. I reinstalled drivers for Bootcamp from the Snow Leopard disk, and finally I tried to repair the installation (by starting up windows using function keys) with at the same time the Windows 7 RC installation disk available for access of files. The option for repair when started up this way is for repair of a non-starting installation. When this is selected, it seems there is nothing found that needs to be repaired. Thus the startup for Windows still has the same behavior. Maybe I do not know how to repair an installation of Windows, and maybe nothing really needs to be changed back to the former condition. Am I just bothering with something that is just fine but which never will be identical to what it was before Parallels?
The bottom line is that even though things seem to operate fine otherwise, I feel Parallels has somehow adulterated the Windows installation, which I would rather just run as Windows without artifacts from a prior installation that influence it.
Thank you for guiding through whatever I need or need not do with these issues.
Please let me know whether this is just neurotic or what! Windows 7 RC on Bootcamp partition worked great until I installed a trial copy of Parallels 5.0. Even with Parallels, things seemed fine, but I did not like some behaviors of the program when run under Parallels. Using Parallels, I was leery about the issue that when I clicked on the icon of the E-drive (the Macintosh hard drive), I kept getting the message that it needed to be formatted. Certainly I was able to access the files of the MacIntosh through shared folders, and by dragging files from desktop to desktop, but I saw very little advantage of for running Parallels for what I do with the Windows programs, and I did not want to mess up the Macintosh hard drive by an accidental reformat while using Windows. Also I like the fact that if I start Windows from the Bootcamp partition rather than access it via Parallels, Windows is physically well isolated from MacOSX, I do not really have a chance to delete or mess up the Mac hard drive, and at the same time one can access the Mac OSX disk for files that might be needed by dragging these into the Windows partition. Parallels just seemed unneeded.
Now that I have uninstalled Parallels from the Mac partition and have uninstalled the Parallels programs and tools on the Windows partition, I still have a strange phenomenon that first showed itself when I had first installed the Parallels 5.0 program. Specifically, since the very day that Parallels first was installed and the bootcamp partition was used as the hard drive for Windows run under Parallels, and now even after uninstalling Parallels, the behavior of the Windows flag logo and startup graphics have been changed. A progress bar that previously did not exist before I used Parallels appears on startup, and the moving colored pieces of the Windows flag logo that are supposed to come together as Windows 7 is booted now do not appear during startup.
To my best knowledge, besides uninstalling Parallels programs, I have also removed manually all parts of Parallels that I can find from Windows, and I even excised hidden files and folders of Parallels found on the C drive. I also sought out PRL files from the Windows partition. I uninstalled and physically removed a program called Stardust (?)... Starcolor (?) or something like that, which was installed at the time Parallels was installed. Folders for this had icons of Macintosh programs. Additionally tried to remove all Parallels, PRL, and Stardust items also from the registry, but there are stubborn ones that are in the "pnp Lockdown files", and some others there that also fail to remove elsewhere. The Lockdown files that do not remove are Parallels files involved in booting, and the others are for a PRL 4600 monitor (???). I was able to remove PRL files in the "Driver Store" folder by changing permissions, and then these were able to be removed. I see no settings anywhere for startup logos in msconfig or when I search through programs in the control panel or in the Windows system folder. I have emptied temporary folders, Prefetch, and have used Windows Live Safety Center to remove stray registry files and to fix issues.
Attempts to go back to an old restore point do not work and do not get me back to the Windows 7 installation that i used to have. I reinstalled drivers for Bootcamp from the Snow Leopard disk, and finally I tried to repair the installation (by starting up windows using function keys) with at the same time the Windows 7 RC installation disk available for access of files. The option for repair when started up this way is for repair of a non-starting installation. When this is selected, it seems there is nothing found that needs to be repaired. Thus the startup for Windows still has the same behavior. Maybe I do not know how to repair an installation of Windows, and maybe nothing really needs to be changed back to the former condition. Am I just bothering with something that is just fine but which never will be identical to what it was before Parallels?
The bottom line is that even though things seem to operate fine otherwise, I feel Parallels has somehow adulterated the Windows installation, which I would rather just run as Windows without artifacts from a prior installation that influence it.
Thank you for guiding through whatever I need or need not do with these issues.
Similar Messages
-
Using parallels for windows xp on my macbook
Hello. I want to take online GIS classes from ERSI this winter and am thinking about buying parallels to run their software (which is only supported by windows xp or vista). I am basically pretty computer illiterate and am not really sure about the most cost efficient way of setting this up. I know I have to buy parallels (or bootcamp, which is better for this case?), then buy the windows software, then install and hope for no hiccups the GIS training software (which is not supported by the ERSI online team when run on a mac). Has anybody gone through this specific or related procedure before and what kind of results did you have? Is my plan sound? With my tiger operating system do I still have to buy bootcamp, is that better to use than parallels? I don't have any other plans to use windows except maybe to send photos through my hotmail account. I will greatly appreciate any advice and/or direction you can provide. Thank you,
DaveHi,
I use Parallels with Windows XP and it runs just fine. I need Windows for one application that is not any where to be found for Macintosh. Follow the Parallels directions for installation and you should have any problems. To use Bootcamp you would need to be running Leopard. -
Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work? -
running parallels with windows xp and OS X Lion. Trying to upgrade my Quickbooks on the windows side to the new 2013 version. The windows side does not even recognize the disc. What am I doing wrong?
S that QB edition is only for windows 8. It won't run on any earlier version of windows.
Looking at the QB 2013 system requirement it runs on XP.
http://support.quickbooks.intuit.com/support/articles/INF21187
So the version of windows is not your problem. Your problem is the virtual machine is not se to use the mac dvd drive. Have you looking into the machine settings. Not windows settings, the virtual machine settings. Make sure it is set to connect the mac dvd drive to the virtual machine.
A good place to start would be the parallels help system. Not the windows help system. -
My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.
In the Music tab of iTunes, do you have 'Include Voice Memos' checked?
-
I am using Iphone with windows. I have draged photos from my computer into Iphone in the past, but cant seem to do it now. How do I move photos from my pc to my iphone without deleting photos that are on the phone.
You cannot drag pics from computer to iphone. This has never been a feature of iphone.
You sync them as you would anything esle.
You select photos from the photos tab. Whatever is selected will be on your iphone. Anything not selected will not be. Make sure that everything you want on your iphone is selected, then sync. -
Using Photoshop6 with Windows 8.1
I was forced to change my hard drive and since then have been unable to use/install Photoshop 6. An error message says the Serial Number is incorrect. It is not. I previously had this version working before I changed the hard drive. Adobe chat tells me that I cannot use it with Windows 8.1 but I know it did before. Can anyone help?
Hi,
Regarding current situation, please try steps in this KB article:
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104
Also try to delete the corrupted registry keys:
How To Delete the UpperFilters and LowerFilters Registry Values
http://pcsupport.about.com/od/driverssupport/ht/upperfilters-lowerfilters.htm
If the issue still persists, please post back more detailed information about your memory stick and the event log about hardware issue here for further research.
Kate Li
TechNet Community Support -
I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.
I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.
-
How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please helpHi Allen,
Is there any way to store the back up to Mac and restore after formating? -
My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?
What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder. -
I have mountain lion OSX and parallels with Windows. Every time I click on a hyperlink in other applications it opens - some 7 Zip file explorer inside Parallels but doesn't go to Safari. Does anyone know solution?
I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again -
Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.
-
Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
[Consolidation-Locked] am I able to use lightroom with windows xp s/p 3?
am I able to use lightroom with windows xp s/p 3?
Message title was edited by: Brett NHere's the Lightroom 4 minimum specs:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows Vista® with Service Pack 2 or Windows® 7 with Service Pack 1
2GB of RAM
1GB of available hard-disk space
1024x768 display
DVD-ROM drive
Internet connection required for Internet-based services*
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7
2GB of RAM
1GB of available hard-disk space
1024x768 display
DVD-ROM drive
Internet connection required for Internet-based services* -
What are TM designers using now with Windows 7?
What are designers using now With Windows 7 that Adobe no longer makes ATM delux? Lite is not good enough and Windows 7 manager is not good enough.
sorry that should be
What TM are designers using now with Windows 7?
Maybe you are looking for
-
Is the address field "middle name" not compatible with numbers?
When dragging or importing contact information from mac address book, the "middle name" field does not seem to be included in the mapping list. Any solutions for this? I have lots of contacts with important middle names/initials in my address book. T
-
How can I get Launching report directory in report trigger??
how can I get Launching report directory in report trigger?? pls help me :'< I can run this function in forms. "how can I get Launching report directory in report trigger??" does reports have same function???
-
Is BOE 4.0 integrated with Data Services XI 4.0
Hi, I have gone through some blogs and documentation on Data Services XI 4.0 and some where it is mentioned that BOE 4.0 is integrated with Data Services XI 4.0. Is it true? If it is true then i want to know how can we integrate BOE 3.1 SP2 with data
-
Struggling without entries in dataview in adobeforms
Hi Consultants, I am in need of your help and i am new to adobe forms and on having a guide by tutorials in technical.com i started to work with adobe forms, right now i had completed the interface part and
-
Please help - what do I need? Recording questions
We do not have digital cable but do NOT need a converter box because we have comcast basic cable. (I did buy one anyway with the coupon). We will switch to digital eventually but right now the budget doesn't allow the extra monthly charges. I am