Using Parameter Form after migration from 6i to 11g

Hello,
I have a migration to do in order to use Reports 11g.
But some of the RDF I have to convert use a parameter form at runtime for some of the parameters.
How can I have the same functionality when calling these reports from my Forms application ?

Hi,
take a look to the following Support Note.
reference
Using Reports parameter forms with RUN_REPORT_OBJECT on the web (Doc ID 139546.1)
Thanks

Similar Messages

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Difference in behavior of sql and pl/sql after migrating from 9i to 11g

after migrating our database from oracle 9i to oracle11g, the developpers are worry that the behavior of the queries and pl/sql procedures/functions will change
example :
in 9i, select salary,count(*) from emp group by salary, it will display the rows sorted by salary
in 11gi, select salary,count(*) from emp group by salary, it will display the rows not sorted by default, we have to add the clause order by salary.
somebody could give the list of other difference in behavior (SQL and PL/SQL) agter migrating from 9i to 11g
Thanks a lot.

Tell your developers: garbage in - garbage out. In relational databases only ORDER BY ensures row order. If your developers relied on GROUP BY implemented by SORT and therefore returning ordered rows they had to realize code they wrote is Oracle release dependent and sooner or later code would require changes. And that "sooner or later" is now reality. In newer versions ORACLE can do GROUP BY via SORT or via HASH. And if it is done via HASH - don't expect ordered results. So tell your developers "payback time".
SY.

Using Access forms after migrating data to Oracle

Hi,
One of the features provided by the original Migration Workbench appears to be the ability to modify a migrated Access database to use an ODBC connection to Oracle so that the original forms could still be used. I have just been through the process of migrating the demo Northwind database into Oracle using the SQL Developer Migration Workbench but this doesn't appear to be an option.
I am missing something or is this feature not available using the migration tools in SQL Developer?
And if it is missing what would be the easiest way to achieve this? From my limited exposure to Access converting the Northwind application manually appears to be rather painful.
Many thanks,
Vince

Hi Vince,
As you have correctly stated, the option to modify an MS Access database for the purpose of using the original forms is not available in Oracle SQL Developer Migration Workbench. As this option is no longer available, the easiest way to achieve the same result is to manually update your MDB file to reference the migrated Oracle tables. Once your MS Access Forms are referencing the link tables, you can continue using the forms as before. I would suggest doing the following:
NOTE: These steps should only be carried out after you have migrated your tables from Access to Oracle using Oracle SQL Developer Migration Workbench. I would also recommend that you take a back-up of your MDB file before carrying out the following steps...just to be on the safe side!
1. Create a new System DSM (using the ODBC Data Source Administrator dialog, via the Control Panel > Administrative Tools on your OS), using the connection details to access the newly migrated Oracle database schema. Test the connection, to ensure it's working correctly.
2. Open your MDB file in database view - double-click the MDB file, holding down the Shift key.
3. Remove the original Access tables.
4. Using the Insert > Table menu item in MS Access, start the New Table wizard and create Link Tables to each of the migrated tables in your Oracle schema. NOTE: Rename the Link Table(s) so it matches the original Access table name. This will save you from having to edit each of the Forms, to change the Record Source it's based on. The form will still have a reference to the original table name, so by reusing the same name your form should just continue working as before. The only difference is that the data is being retrieved from the Oracle database now!
If you have any questions regarding any of the above information, just respond to this thread & I'll get back to you.
I hope this helps.
Regards,
Hilary

How to use parameter forms with run_report_object from Forms?

Hi,
I would like to run a rep report from Forms 9i. I have 9iAS R2 with a rep_<maschine_name> report server.
Untill now I run reports with run_report_object and then used web_show_doc to display the PDF output. Now I have to display a parameter form first and only then can I run the report. Currently I am a bit lost and do not know how to do this? Could some one please point me to some examples or docs?
Thanks in advance.

[   Forms Reports Integration whitepaper 9i/10g ]
see links below
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
---------------------------------------------------------------------------------

Unable to view catalog after migrating from OBIEE10g to 11g

Hi All
I migrated "rpd and catalog" using "Upgrade Assistant" utility (Ora_Home\bin\ua.bat) available in OBIEE 11g. But after migration, I am unable to view my catalog and even create analysis reports in Analysis of 11g.
Do I need to do something additional. Although I am able to login to repository.
Thanks..

Ideally it shud...can you try this tutorial with Sample or Paint objects ??
http://howtobi.wordpress.com/2011/01/14/upgrading-obiee-10g-content-to-11g/

Error ORA-24247 after migrating from 10g to 11g

Hi all,
After a migration from a 10.2.0.3 (32bits) database to a 11.2.0.3 (64bits) database, we are facing a problem related to the UTL_SMTP package. I vale already created a ACL, as you can see below:
-- create acl
BEGIN
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL (acl => 'user_processos.xml',
                                                                     description => 'abc',
                                                                principal => 'PROCES',
                                                                is_grant => TRUE,
                                                                privilege => 'connect');
END;
-- assign acl
BEGIN
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (acl => 'user_processos.xml'
                                                                host => 'rac-abc',
                                                             lower_port => 1521,
                                                             upper_port => NULL);
          END;The problem is: After we try to execute a procedure that calls UTL_SMTP, with user PROCES the error ORA-24247 is raised. I did some research and they all point to the it is necessary to create an ACL to solve this probles, but the ACL already exists, as you can see above.

Hi,
I had the same issue, well multiple issues, with this at first. You should find the solution in one of these links. Make sure you have done each step in the lists and it will work.
[url http://www.ora00600.com/scripts/databaseconfig/ORA-29278.html]ORA-29278 SMTP
[url http://www.ora00600.com/scripts/11g/UTL_SMTP_ORA-06512.html]ORA-06512: at SYS.UTL_SMTP
There are various parameters and configuration steps you need to make sure you have performed for it to work.
Hopefully that helps,
Rob
Edited by: Rob_J on Feb 15, 2013 11:53 AM
*link was not working

Table getting clipped after migrating from 10g to 11g

Hi We migrated our application from 10g to 11g, our application got converted to a trinidad application, skin details are follows:
trinidad skins.xml:
<skins xmlns="http://myfaces.apache.org/trinidad/skin">
<skin>
<id>
suede.desktop
</id>
<family>
suede
</family>
<render-kit-id>
org.apache.myfaces.trinidad.desktop
</render-kit-id>
<style-sheet-name>
skins/suede/suede.css
</style-sheet-name>
</skin>
</skins>
Trinidad Config.xml:
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>
suede
</skin-family>
</trinidad-config>
The problem is when the page loads, the table in the page is shown in a small box (please check the image: http://files.oraclecorp.com/content/AllPublic/Users/Users-J/jaya.battaramvenkatanaga-Public/anonymous/tableclipped.JPG), I am not sure if this is skin problem or layout problem. Please let me know if there is any correction in skin details given above, other wise if lay out is the problem, please provide any documents regarding trinidad layouts.
Edited by: user9976446 on Mar 1, 2011 5:11 AM
Edited by: user9976446 on Mar 1, 2011 5:19 AM
Edited by: user9976446 on Mar 1, 2011 5:20 AM

Hi Jaya,
I think it's a layout problem, the table component or the outer component around the table is set to some default width value (300px?). Try setting the width explicitly to something larger, or see if you can use a stretchable layout component around the table.
If you post the code from your page here we might be able to say more.
For reference:
Trinidad tag library http://myfaces.apache.org/trinidad/trinidad-api/tagdoc.html
A useful migration guide from 10g to Trinidad http://wiki.apache.org/myfaces/from_ADF_to_Trinidad

Unable to parse WSDL of partnerlink after migrating from 10g to 11g

Hi,
My service is an Sync BPEL process calling a customised WSDL with the partnerlink. I migrated the working code of 10g to 11g. But compiling below is the error i am getting while trying to parse the WSDL of the partnerlink after migration.
==========================================
java.lang.RuntimeException: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:78)
     at oracle.tip.tools.ide.common.bpelparser.implementations.xmlef.ProcessImpl.fireModelChanged(ProcessImpl.java:130)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.firePartnerLinkCreated(PartnerLinkEditPage.java:1426)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveToModel(PartnerLinkEditPage.java:360)
     at oracle.tip.tools.ide.pm.bpelgraph.editors.partnerlink.PartnerLinkEditPage.saveChanges(PartnerLinkEditPage.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.AbstractActivityNodeEditor$PanelManager.saveChanges(AbstractActivityNodeEditor.java:224)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.handleOK(ApplyCancelPanel.java:268)
     at oracle.tip.tools.ide.pm.bpelgraph.views.nodeeditors.ApplyCancelPanel.actionPerformed(ApplyCancelPanel.java:339)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1045)
     at java.awt.Dialog$3.run(Dialog.java:1097)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1095)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:841)
     at java.awt.Dialog.setVisible(Dialog.java:985)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1899)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.startEditing(GraphPane.java:1830)
     at oracle.tip.tools.ide.common.graph.view.GraphPane.mousePressed(GraphPane.java:2186)
     at oracle.tip.tools.ide.pm.bpelgraph.views.BPELGraphPane.mousePressed(BPELGraphPane.java:2010)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:262)
     at java.awt.Component.processMouseEvent(Component.java:6260)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4235)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2475)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: oracle.tip.tools.ide.pm.modules.sca.util.SCAException: SCA_COMPONENT_NAME_NOT_DEFINEDProcessInteraction_v1
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.validateNameDefined(JDevSCAIntegrationUtil.java:687)
     at oracle.tip.tools.ide.pm.modules.sca.util.JDevSCAIntegrationUtil.outboundParnerLinkCreated(JDevSCAIntegrationUtil.java:233)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.createOutboundPartnerLink(JDevScaProcessListener.java:170)
     at oracle.tip.tools.ide.pm.modules.sca.ide.JDevScaProcessListener.modelChanged(JDevScaProcessListener.java:65)
     ... 64 more
======================================
Can someone help me out!
Thanks in advance:)

Were you able to resolve this Issue, can you please post the solution
글 수정: soauser

Exchange server using interface IP after migrating from 8.2 to 9.1

hi,
i recently upgraded an ASA pair from 5510 (ASA OS 8.2) to 5512 (ASA OS 9.1). Many of the services are working fine including VPN after some tweaking and modifications in the new configuration, however the exchange server is not sending the traffic from its designated public IP which is mentioned in NAT statements. Exchange is using the public interface IP of the firewall for outbound communication. If i try to telnet from outside to the public IP addresses of the exchange server its giving proper response. kindly help me with this issue. i believe this is some NAT related issue.
OLD configuration (relevant part only)
access-list out_in extended permit tcp any host 213.42.201.35 eq www
access-list out_in extended permit tcp any host 213.42.201.35 eq https
access-list out_in extended permit icmp any host 213.42.201.35
access-list out_in extended permit tcp any host 213.42.201.35 eq smtp
static (DMZ,outside) tcp 213.42.201.35 www 172.16.2.200 www netmask 255.255.255.255
static (inside,outside) tcp 213.42.201.35 https 192.168.190.57 https netmask 255.255.255.255
static (DMZ,outside) 213.42.201.35 172.16.2.11 netmask 255.255.255.255
access-list out_in extended permit tcp any host 213.42.201.34 eq smtp
static (DMZ,outside) 213.42.201.34 172.16.2.21 netmask 255.255.255.255
New Configuraion
object network obj-172.16.2.21
host 172.16.2.21
description Created during name migration
object network obj-172.16.2.11
host 172.16.2.11
access-list out_in extended permit icmp any host 172.16.2.11
access-list out_in extended permit tcp any host 172.16.2.11 eq smtp
access-list out_in extended permit tcp any host 172.16.2.21 eq smtp
nat (inside,outside) static 213.42.201.35 service tcp https https
object network obj-192.168.0.0
nat (inside,outside) dynamic interface dns
object network obj-192.168.0.0-01
nat (inside,DMZ) dynamic 172.16.2.254 dns
object network obj_any
nat (inside,outside) dynamic obj-0.0.0.0
object network obj_any-01
nat (inside,DMZ) dynamic obj-0.0.0.0
object network obj-172.16.2.21
nat (DMZ,outside) static 213.42.201.34
object network obj-172.16.2.11
nat (DMZ,outside) static 213.42.201.35 service tcp smtp smtp
regards
Najeeb

Hi Najeeb,
If you are able to reach out to your SMTP via Public IP address , 172.16.2.11 will be using public IP address 213.42.201.35 for mail delivery (SMTP service alone) . Server 172.16.2.21 will be using Public IP address 213.42.201.34 for any traffic including SMTP , to double check this open your IE on your 172.16.2.21 google it for what is my IP address , you will see your public ip address 213.42.201.34 on your google results .
At any point time your both server will never use your outside interface for any external communication
The issue is exchange is sending the outgoing traffic via the outside interface of my firewall (213.42.201.46).
HTH
Sandy

Elapsed time went up from 1min to 22min after migrating from 10g to 11g

I just migrated one of my database from 10.2.0.2(Red hat Linux, 2 node RAC, sga= 1Gb) to 11.2.0.1 (red Hat Linux 2 Node RAC, SGA=7GB)
The timing for one of the specific query shoot up from 1min to 22 min.
Following is the query:
SELECT /*+ gather_plan_statistics */   docr.DRCONTENT
    FROM      WRPADMIN.T_DOCREPORT docr, WRPADMIN.t_document doc
           WHERE doc.docid = docr.docid
   AND 294325 = doc.rdocid
           AND ( ( ( (EXISTS
                         (SELECT   'X'
                            FROM   WRPADMIN.t_mastermap mstm1,
                                   WRPADMIN.t_docdimmap docdim1
                           WHERE       doc.docid = mstm1.docid
                                   AND mstm1.dimlvlid = 2
                                   AND mstm1.mstmapid = docdim1.mstmapid
                                   AND docdim1.dimid IN (86541))))
                  OR (EXISTS
                         (SELECT   'X'
                            FROM   WRPADMIN.t_mastermap mstm2,
                                   WRPADMIN.t_docdimmap docdim2
                           WHERE       doc.rdocid = mstm2.rdocid
                                   AND mstm2.dimlvlid = 1
                                   AND mstm2.mstmapid = docdim2.mstmapid
                                   AND docdim2.dimid IN (28388)))))
ORDER BY   doc.DOCIDThe select field (docr.DRCONTENT) is a CLOB column.
Following is the plan and statistics in 10g
Statistics
          1 recursive calls
          0 db block gets
     675018 consistent gets
      52225 physical reads
          0 redo size
   59486837 bytes sent via SQL*Net to client
   27199426 bytes received via SQL*Net from client
     103648 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
      51823 rows processed
SQL>
Plan hash value: 129748299
| Id | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
|   1 | SORT ORDER BY                          |                |      1 |     50 | 51823 |00:00:14.72 |     627K|   5379 |    26M| 1873K|   23M (0)|
|* 2 |   FILTER                                |                |      1 |        | 51823 |00:00:08.90 |     627K|   5379 |       |       |          |
|   3 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCREPORT    |      1 |      1 | 51823 |00:00:05.42 |     159K|   3773 |       |       |          |
|   4 |     NESTED LOOPS                        |                |      1 |     50 |    103K|00:00:12.65 |     156K|    628 |       |       |          |
|   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |     50 | 51823 |00:00:00.15 |     481 |    481 |       |       |          |
|* 6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    514 | 51823 |00:00:00.09 |     245 |    245 |       |       |          |
|* 7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   | 51823 |      1 | 51823 |00:00:00.46 |     155K|    147 |       |       |          |
|* 8 |    TABLE ACCESS BY GLOBAL INDEX ROWID   | T_DOCDIMMAP    | 51823 |      1 |      0 |00:00:04.52 |     467K|   1140 |       |       |          |
|   9 |     NESTED LOOPS                        |                | 51823 |      1 |    207K|00:00:03.48 |     415K|    479 |       |       |          |
|* 10 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_MASTERMAP    | 51823 |      1 | 51823 |00:00:01.20 |     207K|    190 |       |       |          |
|* 11 |       INDEX RANGE SCAN                  | DOCID4_INDEX   | 51823 |      1 | 51824 |00:00:00.41 |     155K|    146 |       |       |          |
|* 12 |      INDEX RANGE SCAN                   | MSTMAPID_INDEX | 51823 |      1 |    103K|00:00:00.43 |     207K|    289 |       |       |          |
|* 13 |     TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |      1 |      1 |      1 |00:00:01.05 |     469 |    466 |       |       |          |
| 14 |      NESTED LOOPS                       |                |      1 |      1 |     15 |00:00:14.62 |     468 |    465 |       |       |          |
|* 15 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    |      1 |      1 |      1 |00:00:01.02 |     464 |    463 |       |       |          |
|* 16 |        INDEX RANGE SCAN                 | RDOCID3_INDEX |      1 |    629 | 44585 |00:00:00.29 |     198 |    198 |       |       |          |
|* 17 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX |      1 |      1 |     14 |00:00:00.02 |       4 |      2 |       |       |          |
Predicate Information (identified by operation id):
   2 - filter(( IS NOT NULL OR IS NOT NULL))
   6 - access("DOC"."RDOCID"=294325)
   7 - access("DOC"."DOCID"="DOCR"."DOCID")
   8 - filter("DOCDIM1"."DIMID"=86541)
10 - filter("MSTM1"."DIMLVLID"=2)
11 - access("MSTM1"."DOCID"=:B1)
12 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
13 - filter("DOCDIM2"."DIMID"=28388)
15 - filter("MSTM2"."DIMLVLID"=1)
16 - access("MSTM2"."RDOCID"=:B1)
17 - access("MSTM2"."MSTMAPID"="DOCDIM2"."MSTMAPID")following is the plan in 11g:
Statistics
         32 recursive calls
          0 db block gets
   20959179 consistent gets
     105948 physical reads
        348 redo size
   37320945 bytes sent via SQL*Net to client
   15110877 bytes received via SQL*Net from client
     103648 SQL*Net roundtrips to/from client
          3 sorts (memory)
          0 sorts (disk)
      51823 rows processed
SQL>
Plan hash value: 1013746825
| Id | Operation                               | Name           | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads | OMem | 1Mem | Used-Mem |
|   0 | SELECT STATEMENT                        |                |      1 |        | 51823 |00:01:10.08 |      20M|   2306 |       |       |          |
|   1 | SORT ORDER BY                          |                |      1 |      1 | 51823 |00:01:10.08 |      20M|   2306 | 9266K| 1184K| 8236K (0)|
|* 2 |   FILTER                                |                |      1 |        | 51823 |00:21:41.79 |      20M|   2306 |       |       |          |
|   3 |    NESTED LOOPS                         |                |      1 |        | 51823 |00:00:01.95 |    8054 |   1156 |       |       |          |
|   4 |     NESTED LOOPS                        |                |      1 |    335 | 51823 |00:00:00.99 |    4970 |    563 |       |       |          |
|   5 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCUMENT     |      1 |    335 | 51823 |00:00:00.38 |     402 |    401 |       |       |          |
|* 6 |       INDEX RANGE SCAN                  | RDOC2_INDEX    |      1 |    335 | 51823 |00:00:00.17 |     148 |    147 |       |       |          |
|* 7 |      INDEX RANGE SCAN                   | DOCID9_INDEX   | 51823 |      1 | 51823 |00:00:00.55 |    4568 |    162 |       |       |          |
|   8 |     TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCREPORT    | 51823 |      1 | 51823 |00:00:00.94 |    3084 |    593 |       |       |          |
|   9 |    CONCATENATION                        |                | 51823 |        | 51823 |00:22:16.08 |      20M|   1150 |       |       |          |
| 10 |     NESTED LOOPS                        |                | 51823 |        |      0 |00:00:02.71 |     221K|   1150 |       |       |          |
| 11 |      NESTED LOOPS                       |                | 51823 |      1 |    103K|00:00:01.19 |     169K|    480 |       |       |          |
|* 12 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    | 51823 |      1 | 51823 |00:00:00.72 |     108K|    163 |       |       |          |
|* 13 |        INDEX RANGE SCAN                 | DOCID4_INDEX   | 51823 |      1 | 51824 |00:00:00.52 |   56402 |    163 |       |       |          |
|* 14 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX | 51823 |      2 |    103K|00:00:00.60 |   61061 |    317 |       |       |          |
|* 15 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    103K|      1 |      0 |00:00:01.14 |   52584 |    670 |       |       |          |
| 16 |     NESTED LOOPS                        |                | 51823 |        | 51823 |00:22:13.19 |      20M|      0 |       |       |          |
| 17 |      NESTED LOOPS                       |                | 51823 |      1 |    725K|00:22:12.31 |      20M|      0 |       |       |          |
|* 18 |       TABLE ACCESS BY GLOBAL INDEX ROWID| T_MASTERMAP    | 51823 |      1 | 51823 |00:22:11.09 |      20M|      0 |       |       |          |
|* 19 |        INDEX RANGE SCAN                 | RDOCID3_INDEX | 51823 |    336 |   2310M|00:12:08.04 |    6477K|      0 |       |       |          |
|* 20 |       INDEX RANGE SCAN                  | MSTMAPID_INDEX | 51823 |      2 |    725K|00:00:00.83 |   51838 |      0 |       |       |          |
|* 21 |      TABLE ACCESS BY GLOBAL INDEX ROWID | T_DOCDIMMAP    |    725K|      1 | 51823 |00:00:00.92 |   51823 |      0 |       |       |          |
Predicate Information (identified by operation id):
   2 - filter( IS NOT NULL)
   6 - access("DOC"."RDOCID"=294325)
   7 - access("DOC"."DOCID"="DOCR"."DOCID")
12 - filter("MSTM1"."DIMLVLID"=2)
13 - access("MSTM1"."DOCID"=:B1)
14 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
15 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
              ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))
18 - filter(("MSTM1"."DIMLVLID"=1 AND (LNNVL("MSTM1"."DOCID"=:B1) OR LNNVL("MSTM1"."DIMLVLID"=2))))
19 - access("MSTM1"."RDOCID"=:B1)
20 - access("MSTM1"."MSTMAPID"="DOCDIM1"."MSTMAPID")
21 - filter((INTERNAL_FUNCTION("DOCDIM1"."DIMID") AND (("DOCDIM1"."DIMID"=86541 AND "MSTM1"."DIMLVLID"=2 AND "MSTM1"."DOCID"=:B1) OR
              ("DOCDIM1"."DIMID"=28388 AND "MSTM1"."DIMLVLID"=1 AND "MSTM1"."RDOCID"=:B2))))Calling all performance experts. Any ideas ??
Edited by: dm_ptldba on Oct 8, 2012 7:50 AM

If you check lines 2, 3, 8, and 13 in the 10g plan you will see that Oracle has operated your two EXISTS subqueries separately (there is a bug with multiple filter subqueries in that version that indents each subquery after the first one extra place, so the shape of the plan is a little deceptive). The statistics show that the second subquery only ran once because existence was almost always satistfied by the first.
In the 11g plan, lines 2, 3, and 9 show that the optimizer has transformed your TWO subqueries into a single subquery, then turned transformed the single subquery into a concatenation and this has, in effect, made it execute both subqueries for every row from the driving table - all the extra work appears from the redundant execution of the thing that was the second EXISTS subquery.
If you extract the OUTLINE from the execution plans (add 'outline' to the call to dbms_xplan as one of the format options) you may see some hint that shows the optimizer combining the two subqueries - if so then put in the "NO_xxx" hint to block it. Alternatively you could simply try adding the hint stop ALL cost-based query transformations /*+ no_query_transformation */
Regards
Jonathan Lewis

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

Whether using Oracle after migrating from MySQL be easy or not?

Though oracle is tough secured one, I don't know exactly the complexity of using Oracle database. Using MySQL 4.1.22 in my website https://www.puntercalls.com/ . Though the site is based on providing share market tips, it deals with a huge amount of stock market data and in much more real time basis hand-to-hand with NSE and BSE info which means a tough security is the utmost demand of the time.
My question is whether using Oracle after migrating from MySQL be easy or not. You can check my site at https://www.puntercalls.com/ for different real time data updation parts.
Kind suggestions are greatly appreciated in advance!
Edited by: 968684 on Oct 31, 2012 7:04 AM

Hi,
As you are really asking about how to setup and use securioty features in an Oracle database it woul db ebetter to raise the question in this forum -
Forum: Database Security - General
Database Security - General
They will have more knowledge about Oracle security features and which it would be best for you to use.
Regards,
Mike

ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2

Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You

Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.

Using Parameter Form after migration from 6i to 11g

Similar Messages

Maybe you are looking for