Using PCK with XI3.0

Greetings,
I have installed the PCK SP5 running on J2EE server. The PCK GUI is working fine. we have also configured a simple scenario to send a File from PC (where the PCK is installed) to XI. In the XI directory when I tried to configure the Communication Channel of type File, the system doesn't show the PCK host on the Adapter Engine DropBox !
How can I connect the PCK to the SLD ? I could find any link from the PCK config tool.
All the adapter config is done in the XI directory what is the use of the PCK config tool ? I am sure I am missing something !
Thanks for you help.
Regards,
M. Zehana

Thanks Guy,
According to SAP Documentation, we should configure the communication Channel centrally in the XI directory !
So we also need to make another config in the PCK itself?
When Creating the Communication Channel in the Xi directory, what king of adapter engine should we select?
Is there any document that can help with PCK Config ?
Thanks in advance.
Regards,
M. Zehana

Similar Messages

Creating adapters using PCK

Hi guys,
I have recently installed PCK. I want to start out with the development of adapters using PCK. Can somebody please provide some resources for the same.
Thanks in Advance

Hi anurag,
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e2235b71-0701-0010-9f85-b06c7d1c7a0e
ADAPTER development
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7bf6e190-0201-0010-83b7-cc557eb76abe#search=%22adapter%20development%20site%3Asdn.sap.com%22
Adapter framework
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d5e190-0201-0010-0daf-e9e270f85ebb#search=%22adapter%20development%20site%3Asdn.sap.com%22

Problem scheduling webi reports with XI3.1 pending forever

Hello,
I've got a problem scheduling webi reports with XI3.1 scheduler.
After confiming scheduling job (loggin in with "administrator" user), status remains "pending" forever(using Infoview or CMC).
I tried different job recurrence a modalities (attachment formats, destination user etc).
I also try to add (-javaArgs "Xmx900m,Xincgc,server") wich is the SAP solution found on its portal but it does not work.
I use BO XI 3.1 in Windows 2003 server, after the install I reduced the maximum memory of Java in the tomcat 5.5.2 server from 1024 to 512 because the server never started with the initial size.
Please I need Help.
thanks in advance,
Samy

Hi,
Below SAP solution found found in BOB Forum.
I applied this solution and now everything works fine !!
I just add this -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Hope this helps:
Symptom
Scheduled WebIntelligence reports remain stuck in 'pending' status after installing Microsoft windows patches of April 2009. Restarting the Adaptive Job Server, Central Management Server or Server Intelligence Agent has no effect.
The Event Viewer logs show the following entry: Unable to start the sub-process (Job Server Child). Cause : Couldn't get IJob interface or writing IAudit: Pipe exception. Reason: jobserverchild (WebIJavaSchedulingService ReplicationSchedulingService, 0, Timeout waiting for Child [4716] to register ([120]seconds).
Reproducing the Issue
Install Business Objects Enterprise XI 3.x on a French Windows 2003 SP2 32bits server
Install the following Microsoft windows update patches of April 2009:
KB923561, KB925336, KB952004, KB956572, KB959426, KB960225, KB960803, KB961373, KB967715
Schedule a WebIntelligence report
The report remains in Pending status
Business Objects Enterprise XI 3.1
Windows 2003 SP2 32bit (French)
Microsoft windows patches of April 2009
Cause
With Microsoft windows patches of April 2009, the maximum Heap Size for java processes has been reduced to under 1000MB.
Resolution
Apply the following steps to fix the issue:
Launch the Central Management Console
Select Servers
Right click on <server_name>.Adaptive Job Server and select Properties
Add the switch -javaArgs "Xmx900m,Xincgc,server" in the command line of the server
Click on Save and Close
Restart the <server_name>.Adaptive Job Server
Regards .
Sam.
Edited by: samouber on Aug 21, 2009 2:54 PM

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

OPEN CURSOR using a WITH clause in the select query

Hi,
I am using Oracle 9i. I have a requirement where I have a REFCURSOR as an OUT parameter for my procedure. I have declared the TYPE and created the procedure.
In the procedure, I am using OPEN <cursor_name> FOR <query>;
Ideally this works in most of the cases that I have tried earlier. However, in the current case I am using a WITH clause in my query to get the results.
I need help in understanding if the above mentioned syntax would not allow me to use the WITH clause in the query.

What error do you get , seems to work ok for me on 10g
SQL> begin
2 open :cv for 'with x as (select * from emp) select * from x';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> print :cv
     EMPNO
ENAME
JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7521
WARD
SALESMAN        7698 22-FEB-81       1250        500         30
      7566
JONES
MANAGER         7839 02-APR-81       2975                    20
     EMPNO

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
Thanks,
Sean

The answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
https://discussions.apple.com/community/professional_applications/aperture
However I believe you can have Aperture installed on two machines however only one may be using it at a time.
On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.

How do I use LDAP with iMQ 2.0?

I am looking for an example to see how to use LDAP with iMQ 2.0.
I was able to set up the config settings to access a local LDAP,
but iMQ authentication still rejects valid logins.
Let me know if I can find more info someplace.

You can also find an example I put togther in the Sun One knowledge base.
If you go here:
http://knowledgebase.iplanet.com/NASApp/ikb/index.jsp
Search for article 7772
Alternatively here is the direct link
http://knowledgebase.iplanet.com/ikb/kb/articles/7772.html

How do you use Struts with Jboss Portal

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

How do I use user_datastore with a feeder proc to add an mdata section?

Hi,
I have text data spread across a number of different tables. I have created a user_datastore with a feeder procedure that creates an xml document which is then indexed into a dummy column on the parent table. This works fine. However I need to add an mdata section to the index, via my xml document. I haven't seen any examples of this being done in conjunction with the ctxsys.auto_section_group option of the create index statement, and am wondering if it is possible?
Could somebody furnish me an example of how I achieve this.
Oracle 11.2.
Thanks
Ralph

You can't use MDATA with AUTO_SECTION_GROUP. AUTO means it automatically assigns zone sections for every tag it finds - if you want anything other than zone sections you must use BASIC_SECTION_GROUP, XML_SECTION_GROUP or HTML_SECTION_GROUP and manually define your sections.

I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there

I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there
It is an Iphone 4

If you go to settings- store - click on the ID and sign out. Then you can put in your apple id.

Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO Corporation

Hello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI

How to trigger New page while using ALV with classes/oops?

Hi All
I am trying to print a report which has to show the data in two pages.
I am using ALV with classes/oops.
Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
Please send some code samples also if available.
Thanks in advance.
Jerry

using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
in case of list you can view that directly.
sort-fieldname = 'FIELDNAME'.
sort-group = '*' "triggers new page
sort-up = 'X'.
append sort to it_sort.

I dropped my macbook pro and the screen is broken can i still use it with an external monitor? Or can I or how do I transfer hard drive files to my mac mini?

I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!

I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
Um, you might consider investing in a backup drive.
And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's.

Using PCK with XI3.0

Similar Messages

Maybe you are looking for