Using Personal Budget Template- help with Budget/Transactions

Hello,
I'm new to using Number and decided to tackle my budget.  I've pretty much stuck with using the default template since I'm not too savvy at this yet.  But, I've added a new Category under the Budget page, but it doesn't seem to be transferring to my Transaction page.  Is there any way to add my created category to the drop down menu under transactions?  I added the category "Gifts," but I can't seem to figure out how to get it to show up in the drop down menu in the Transaction worksheet. 
Any help would be fantastic!  Thank you

Hi Barry,
The new features in Pop-ups make it easy to edit and no, editing does not change the chosen values. If you forget to select all the Pop-ups and change one Pop-up cell, you can later select the rest of the column. Format Inspector offers to merge, and again it does not change chosen values.
Also, we can drag items to reorder the menu. Even better, create a Pop-up from data in selected cells (a long time on the wish-list in Numbers 2).
Already added to SG's GAINED thread
https://discussions.apple.com/thread/5473882?start=45&tstart=0
Regards,
Ian.

Similar Messages

  • HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

    Need help with Itunes transferrs and can I use my Edge phone as a router?

    I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
    Is this an iPhone?
    Set it up using the AppleID you used on the previous iPhone.

  • Using the Standard Template Library with 5.0 using 4.2 compatibility mode

    Has anyone used the Standard Template Library with the 5.0 release of the complier using the -compat=4 flag ?

    It's not your system, unfortunately. It's iTunes 5.0. I have XP, a brand new drive and Nero. I can burn all sorts of CDs, just none from iTunes.
    I have gotten several emails from Apple regarding this issue, none of which helped. The last response I got said they were working on my problem. Right now, the best solution that I can come up with, although I'm not sure how to do it, is back up your songs as a data CD, uninstall 5.0 and reinstall version 4.9.
    If you go back a few days (or maybe a week) in the discussions, someone posted a link for 4.9. If you can do this and successfully install 4.9 you will have no problem burning CDs. I just haven't had any luck burning my songs as data. I have 4.9 on an older computer and can burn CDs for days. So all I have to do is get my songs to the old PC and I'll be in business.

  • Flash Site Template Help With Text

    So I downloaded a flash template to use for my website... all I need are some editing of the texts, pictures, and some of those links. Here is the template:
    http://www.templatemonster.com/flash-templates/24451.html
    My problem is I'm completely NEW at flash. I used to use FrongPage 2003 for my webdesign but I wanna use this for my new website (since it looks a lot better!) How do I edit the text fields? I can only seem to move the bar along the timeline to watch the animation, and see all the layers and item properties that none have anything with the text in them. And also the images as well, if I need to do anything special with those (within template link above you'll see they flash white for a second) and the main logo has some animation there. I have all the fonts required but I don't know if I also have to make the logo with those special white flashy lines like a GIF animator or if that's just some special affect within the template itself.
    Now due to legal notices specified by the site I can't share the template with you but I'll attempt to answer any and all questions i can to see if I can get this all figured out so I can begin adding my own content to the site. Thanks in advance.

    Doesn't look like there's an xml file for the text. Reading the template help index, and its saying some text might have complex coding for special effects and that I'd have to edit by the Library or something, so I'll try using that reference for now. I appreciate the help and I may come back if this can't help me lol
    EDIT:   It says I'm missing the font file "tahoma" mapped to _sans    ....??  I have tahoma... as well as the main title logo isn't appearing in the .fla file anymore even though I got the correct font. I'm confused >.<
    Edit 2: As well I get this a lot on many different areas:
    Forms Component - Version 0.81
    Couldn't load configuration.
    Message was edited by: undreamingreality

  • How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore. Please help with proper steps, if any.

    How can I sync my iPhone on a different computer without erasing my applications? My iPhone was earlier synced with a PC which I don't use anymore.
    On the new computer, I am getting a message that my all purchases would be deleted if I sync it with new iTunes library.
    Please help with proper steps, if any.

    Also see... these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • Purchased extreme to replace modem/router DSL used telephone cord need help with set up

    Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
    Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
    How do I get extreme to work as the modem and router ?

    How do I get extreme to work as the modem and router ?
    you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

  • Template help with Flash Gallery

    First of all I would like to say that I give everyone on here so much credit for learning flash and actionscipt. I wish I payed attention in HS class so I could understand this better.
    I purchased a template from template moster (http://www.templatemonster.com/flash-templates/28019.html) and I am trying to modify it. I am attempting to add 3 other galleries which look exactly like the gallery in the template with the same functions. I figured out how to change the pictures which both the large and thumbnails are being loaded from a portfolio folder outside of the main fla file. I wish the files were in the fla because I am sure it would be a little easier. Can anyone help me with duplicating the gallery page? I am using CS3 and Actionscript 2. If you need a screen shot just ask. Thank you for the help

    To add further information to the post above...
    When I use the selection tool to drill down into the buttons
    it goes from "Scene1" to a "menu" symbol which contains the five
    stacked buttons in the stage (again they all display as "About Us"
    instead of how they look in a browser). I can then drill down into
    each individual button which always goes to the same "btn" symbol
    (resulting in a workspace that is viewing Scene1->menu->btn).
    When I right-click on any of the five buttons and select "Actions"
    in the menu it brings up the Actions - movie clip dialog and there
    are no actions specified.
    However, when I right click on the parent "menu" symbol and
    look at actions they are the following:
    onClipEvent (load) {
    num = 1;
    on (rollOver) {
    if (_root.link<>num) {
    this.gotoAndPlay("s1");
    _parent["bta"+num].gotoAndPlay("s1");
    on (releaseOutside, rollOut) {
    if (_root.link<>num) {
    this.gotoAndPlay("s2");
    _parent["bta"+num].gotoAndPlay("s2");
    on (release) {
    if (_root.link<>num) {
    _parent["bt"+_root.link].gotoAndPlay("s2");
    _parent["bta"+_root.link].gotoAndPlay("s2");
    _root.link = num;
    _root.play();
    Lastly, I can drill down one further step to
    Scene1->menu->btn->btn_0. When I do this the "About Us"
    text disappears and just the button background is showing. When I
    right click in the workspace there is no "Actions" selection. When
    I right click on the frame in the timeline there is an "Actions"
    selection but there are no actions specified.
    thanks!!
    the link to the template:
    http://www.templatemonster.com/flash-templates/15895.html

  • Need help with Monthly Transaction By Hour Report

    Post Author: cbcombs
    CA Forum: General
    Hello,Newbie needs to write a transaction report that is grouped by days of the week for a calendar month. It will have one column for each day of the week and each of those columns will contain a whole months of week day data. Then it will be grouped by each hour of the day. It will contain the number of transactions for each hour. And then a weekly average of the number of transactions for each hour of the day. The week starts on a Monday and goes through Sunday. They are probably going to want the dollar amount of the transactions too. Below is an example with the first two rows of data populated. Monthly Transaction Report For August 2007                   Mon            Tue             Wed             Thu            Fri             Sat             Sun            Average08:00                0                2               2                1                10                    5                    2                      3.1409:00                    25                    3                    5                    4                  5                    8                    6                      4.43  10:00                    5011:00                  10012:00                 15013:00                  15013:00                   12514:00                  10015:00                    5016:00                     1017:00                       2 Any help would be appreciated. 

    Post Author: kbrinton
    CA Forum: General
    You could use the cross tab expert and set the columns to the day and the row to hours with it summing your transactions. So for the rows choose your date field and then choose Group options and have it set to "for each hour". Then the column choose your date field and have it set to "for each day".  Then have it summarize your transactions.
    Hope this helps!!

  • Help with Report-Transaction P000_M10_NDT

    Hello Experts,
    I came across this transaction P000_M10_NDT..... looks like this is a standard SAP Delivered report.....
    Can anyone please explain me how this report works? and what is its use? with examples?
    All inputs are appreciated and rwrded.........
    Thanks,

    Hi,
    You can refer to Wikipedia help as follows:
    http://en.wikipedia.org/wiki/401%28k%29
    It is the part of legislation and makes sure that tax deferral of HCEs - highly compensated is not more than some percentage of the tax deferral of NHCEs non-highly compensated.
    Regards
    Edited by: Dilek Ersoz Adak on Mar 23, 2010 3:59 PM

  • Help with PA30 transaction...

    Hi,
    I would like to to know how do we store various data for various communication types
    in PA30 for a given personnel number.
    For example, when I want to store email ID I use subtype as '0010' and save it but now I
    also want to save the Syetm user id of the user for type '0001'. But when I save it using
    type '0001' then the data with type '0010' gets overwritten and now the PA0001
    stores data with user type '0001'.
    I want the data to be stored both for Type '0001' and '0010'.
    Thanks.
    Regards,
    Rajesh

    Hi,
    If you are sure, you selected the right subtype for storing data, then please select the overview icon from intial PA30 screen after selecting the infotpe 0105.
    Else please use the navigation arrow key to scroll between records. As you have subtype 0001 & 0010, you get to see 0001 as the first record . Please select the navigation arrow and you will be able to see the second record for subtype 0010.
    Reward if this was helpful.
    Regards

  • Using multiple guides to help with layout

    Hi,
    I have seen in lots of Muse and InDesign training videos that the designers are using multi guides which run vertically. The guides are set with a wider gap, then a narrow gap, then a wider gap etc. I know this to aid layout and create a more uniform spacing.
    Can anyone tell me the method used to create the guides and how the gaps (wide and narrow) are calculated.
    Thanks,
    Matt

    In the new site dialog box on the upper right side. The wide ones are the columns and the narrow are the gutters. Hope this helps

  • IMovie to Quicktime using expert export settings - help with size settings

    I want to produce PAL DVDs in widescreen format using iDVD. The original video was recorded in standard size and I want to use iMovie HD to produce Quicktime movies for these DVDs.
    I am using the expert settings to export to Quicktime files. I am using H.264 compression.
    It is the size settings that I need your advice.
    Which do I use? PAL 720x576 4:3, or PAL 720x576 16:9, or one of the HD settings?
    Do I preserve aspect ratio?
    I have looked through many posts, etc but none readily answers my issue with size settings.

    Yes - footage is in 4:3
    I want to show the DVDs on widescreen TVs but not sure if TVs automatically adjust 4:3
    movies into widescreen ratio (say with letterboxing).
    For my standard footage video,I guess I am not sure of what ratios I should be using at the iMovie export to QuickTime stage, and then whether to set the iDVD project into 16:9 format, or leave it in 4:3 format and hope to widescreen TV do the converting.

  • Help with looong transactions

    Our J2EE application makes heavy use of program-demarcated transactions. We
              start the transaction and then perform a lot of data fetches, data updates,
              and business logic followed by the eventual commit.
              Sometimes these transactions exceed Weblogic's builtin 30 second time limit.
              In some case we've boosted the timeout on the transaction to 5 mins, and
              even that is close to the edge.
              I suspect our design is flawed and that transactions should not be so
              long-lived. I've never worked on a system that worked this way. Can anyone
              provide advice or best-practices for this scenario?
              One example of a long transaction is in a piece of code that generates a
              file containing invoices. After the file is created we need to update the
              database records that contributed to the file so a transaction is started
              and then 1000's of records are updated. In this case we tried to minimize
              the transaction duration by only doing the data updates inside the xaction
              (it used to doo all the business logic in there too) but even so it is
              possible to exceed the 30s timeout due to the size of the data.
              [email protected]
              

    Couldn't you just use the BubbleEvent=false if the thing you do in beforaction goes bad. then SBO don't do its own functionality ... I think your broblem is that beforeaction = true and beforeaction= false are two events and to my knowlegde the transaction can't work in two different events (Need a commit or rollback in the beforeaction=true event).

  • I need another person Who Can help with this iphone it will not restore on will not completely turn on

    i can't turn on the phone or even restore the phone completely it will not turn on at all !!

    iOS: How to backup - http://support.apple.com/kb/HT1766
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808

  • Help with Transaction  PTMW_PROF

    Hi everybody.
    I need some help with PTMW_PROF transaction.
    My situation is the following: I'm working with this standard program, and i have to make some checks on the input data, like we always do with standard infotypes via PA30.
    But the problem is that i can't find any BADIs associated with this standard program.
    I've also found this user-exit: PTIMTMW, nevertheless, looks like it's not useful for my purposes.
    Any ideas?
    Thanks in advance.

    Hello.
    I've found:  BADI PL_BT_USER, and this BADI has a method called PROCESS_DATA with the following paramters:
    FLT_VAL                     Type            TIM_BLPTPOINT_EX
    I_RECORD     Type Ref To      IF_PT_TD_CONTROL
    I_TIME_DATA     Type            TIM_BLP_REQUEST_TAB
    E_MESSAGES     Type            BAPIRET2_T
    E_TIME_DATA     Type            TIM_BLP_REQUEST_TAB
    Looks like I_RECORD has the data i need to check out, but when access it in debuggin mode i cant find  any useful values, It's got the following value: 313 <CL_PT_TD_CONTROL>
    How can i get the values i need with this parameter?????
    Thanks in advance.

Maybe you are looking for