Using PFI output as static line and then pulsing.

I would like to know if it is possible to use a PFI output on a USB-6212 as a static output and then pulse the output? I am using the output as a control to a switch and need to generate a pulse to interrupt the switch.
Thank you
John

Hello John,
Yes, it is possible but keep in mind that the digital lines of the USB-6212 are restricted to software timed operations. If you need a hardware-timed pulse you will need to use the device's counter(s).
Message Edited by ManLongAtNI on 06-01-2010 05:12 PM
Regards,
Glenn

Similar Messages

HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
How do I rectify
Paul

you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
But, I haven't tested this with a BT product...and I suppose anything is possible.
Still, I would be extremely surprised if this worked.
The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

I need to create a total per line and then a grand total

I have a report where I am getting counts. I have created totals per column by using a summary column.
Now how do I get totals per line and then a grand total.
I am not sure how to total the summary columns. I thought I could create a paramerter
and in a formula column sum up the summary columns but I am getting errors.
Is this correct for this.
:P_parm := :cs_1 + :cs_2 + :cs_3; I am getting errors on this.
I tried to total up the information in my sql to get totals per line but am having problems.
Need help getting totals. does nvl(' ',0) return a numeric 0 ?
Any example of what I can do through oracle reports to get these totals.
howard

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?

My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?

jkrijgsman wrote:
Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
There's Toast.
http://www.roxio.com/enu/products/toast/titanium/
$79.99
Final Cut Pro X will also burn DVDs.
$299.99
How large is your movie? Is it possible that you could output it as a QuickTime file and then burn that as a data DVD? Is uploading to YouTube an option?
Matt

A few seconds after Firefox opens it suddenly scrolls down a few lines and then proceeds normally.

Firefox on occasions behaves like very early versions of Explorer when opening a new web page. A few seconds after it opens, it suddenly scrolls down a few lines and then proceeds normally. Why? Can it be fixed?
== This happened ==
Not sure how often
== no reason

Hello Ybakhat,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The computer sleeps or shuts down unexpectedly.
Best of luck,
Mario

My iMAC 27" suddenly displayed thick vertical green lines and then went to a whitish grey screen. any insight?

While accessing PAGES on my 27" iMAC computer, then screen suddenly displayed thick green vertical lines and then went to a whitish grey screen. Each time I shutdown and turn back on it shows the same thing and then goes to a blue screen. The last time I rebooted and I came to this site to try to problem solve. Any idea?

It sounds like a GPU problem, but I am not sure. Try booting in AHT (Apple Hardware Test) to be sure. Also, if you have another Apple computer, try to boot the other computer with the hard drive from the iMac using target disk mode. While booted on your imac's hard drive, check console for kernel panic logs. Paste only Kernel panic logs not application crash logs here please.

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!

Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now.

I made a picture collage in pages from the pictures in iPhoto. You used to be able to print and then say save as a jpeg to iPhoto and that option is gone. How do you turn your document into a jpeg now?

If you chose print, you can save as PDF. If you open the saved PDF in preview, you can save as JPEG, GIF, PNG. FYI you can crop in preview.
Another option is you could use command + shift + 4 to do a screen shot of a specific part of of the screen.

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao.

How to read two text files using the Read from spreadsheet.vi and then plot it

I need to read two text files using the read from spreadsheet function and then plot these files over time.
The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
I really appreciate any help..thanks
Attachments:
RMS.txt ‏1 KB
FREQUENCY.txt ‏1 KB

From NI Example Finder:
Write to Text File.vi
Read from Text File.vi
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Why my iphone produces a bug after it renew for OS5.1.1. The bug is when I use message, type a Chinese word, and then using a releveant word, then the program automately closes. Every time I try the same procedure, it definitely closes.

Why my iphone produces a bug after it renew for OS5.1.1. The bug is when I use message, type a Chinese word, and then using a releveant word, then the program automately closes. Every time I try the same procedure, it definitely closes.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way.

During restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos please help my memory doubles.

during restore of my backup on iphone 5s i saw my photos and videos get doubled on ios 8.0 and moreover
if i use to go at my computer and then open my iphone and in folder i see some files name local disk and my photos
please help my memory doubles.

I'm not sure, but I know it's not recommended to upgrade to iOS 8 on anything older than an iPhone 5. I only lost my music playlists and music that was on my phone, but that music is also on my iTunes, not the playlists though, and I don't want to go through ALL my iTunes library to fix it either... But it seems I don't have a choice right now.
Whatever you do, do NOT upgrade to iCloud Drive, keep iCloud till OS X Yosemite comes out, if your computer is a Mac. I also just noticed that all my documents on my phone are gone from Pages, BUT if I go on the iCloud website they are still there. Hopefully it will all work itself out when I can update my macbook pro to OS X Yosemite.
If you backed up your phone and all your purchases off your iPhone prior to trying to upgrade you should be fine... But I'm not even remotely sure.

I used up all of my pages and then my games disappeared? anyone help?

I used up all of my pages and then my games disappeared? anyone help?

As already mentioned in your other post, you'll have to create folders and group the apps, then your other apps will be visible again.
To create folders, tap on one app until it starts to shake, then move it over another app and let go. After that you can move the apps into that folder by dragging them into it.

My ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

my ipad is on an infinite loop. I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started. I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.

Using PFI output as static line and then pulsing.

Similar Messages

Maybe you are looking for