Using phone extensions or more than 1 phone socket...

Dear All,
Your help would be much appreciated.
I am currently with o2 broadband and am looking to go with infinity but I need the following question answered:
My master socket is in the living room which the infinity router and modem will be installed. I have a satellite receiver in the living room which needs Internet connection through an Ethernet cable. Now I have my PS3 upstairs in my room which has no phone line socket so I am using a telephone extension lead from another room next to mine which has a phone socket into my room, to connect my PS3 hard wired to the modem which I bring upstairs to my room to play my PS3 on, how would this work with the set up of infinity router and modem?
BT say they can only enable one phone socket in the house which is the master socket. So the ps3 will have to be connected wireless but for online gaming wireless connections are not that good.
Is it possible to have more than 1 phone socket enabled? Master socket and the upstaires bed room socket with a phone extention to my room?
Or can I get a new phone line socket installed into my room?

If you are not using the telephone extension for any telephone appliances eg for just the PS3, why not use a long ethernet cable (or Homeplugs/Wireline adaptors) from one of the routers ethernet sockets instead?
For instance you can find such cables here.
http://www.maplin.co.uk/cat-6-utp-patch-cables-45889
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Similar Messages

My iPhone5 has terrible Network connection. It rarely works at the normal speed-if ever. I usually get 3G or 1x network dozens of times a day. My phone also gets pretty hot when i try to use any data for more than a few minutes.

My iPhone5 network connection has been terrible for the past week and a half. My phone is no more than a year old so I don't see why it would be a problem with the phone. When I try to use the internet or look for apps or anything like that, anything that uses data really, it takes FOREVER if it even loads! Most of the time it won't even load. My network changes from LTE(which doesn't work well) to 3G(which works even less) and then to 1x(which basically doesn't work at all). This happens dozens of times a day. It's getting quite irritating. I've tried turning my phone off and letting it sit for a while and that does nothing. I'd really prefer NOT to restore my phone. What is the deal??!

Are you broadcasting your SSID? Sometimes this can cause a problem connecting. Is this Cisco router running any turbo modes or special preparatory protocols.
There are no know issues with Wi-Fi connectivity except on first connection; and the chance of 2 devices having the exact same issue is very unlikely. This sounds like something to do with your wireless router.
Have you tried to connect to another Wi-Fi hotspot elsewhere?
Do you have any 2.4 GHz wireless phones or security system that could interfere with connection?

How do i get my i phone to show more than just the apple symbol?

how do i get my i phone to show more than just the apple symbol?

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

If the I phone 5 stay more than 8 hours on charger , is that effect the batteries?

If the I phone 5 stay more than 8 hours on charger , is that effect the batteries?

No I charge mine overnight and always have ... Once the battery reaches full charge the charge only trickle charges or turns off

Using Adobe apps on more than one account?

Is there a fix forthcoming for the problem running CS4 on Leopard, where you can't use Adobe apps on more than one user account at a time (via fast user switching?) When I switch over to my 2nd account, I get some sort of "licensing error" dialog unless I quit all Adobe apps in my first account, which is incredibly annoying.
Thanks.

Greg,
Adobe's single-user licensing allows for your installation and
non-simultaneous use on two computers. And the software may think that two different users are trying to use the software simultaneously. You might try contacting Adobe tech support and ask.
Neil

How to use cursor data in more than one location in form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

How to use cursor data in more than one location in the form?

hi all.
is it possible to make cursor as global or public in the form so i can use its data in more than location for testing like in buttons triggers.
for example:
if i declare the following cursor in "WHEN-NEW-FORM-INSTANCE" trigger
CURSOR cur
IS
SELECT ID, NAME
FROM PERSON;how can i use this cursor in other triggers in other buttons in the form?
thanks

kareem wrote:
now i have the old data- from cursor and the new- from tableNo, you have not. When you open the cursor you get the state of the database at the current SCN.
If you
- open your cursor, fetch the data and close the cursor
- update some data
- open your cursor, fetch the data and close the cursor
you will get the updated data from your cursor the second time (unless your update isn't a uncommited autonomous transaction but I wouldn't go down that route).
You will have to save your data somewhere or you might take a look at flashback: http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/consist.htm#i20759
cheers

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

Can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

Yes, You can install and use the Adobe application on 2 computers (not more than 2).
You can get the details, http://www.adobe.com/products/creativecloud/faq.html
Can I use the software I download from Creative Cloud on multiple computers?
Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership. See theproduct license agreements page for more information.

Can't use the iPod on more than one computer!!!!!!!

Ok, This has got me so frustrated! We got an iPod and installed iTunes. We thought we had it figured out - we purchased music from iTunes, played it on the iPod and everything was great. Then plugged the iPod into my other computer to listen to our music and it won't freakin' play! says the computer is "Not Authorized" and suggests that by 'authorizing' the 2nd computer, it will overwrite the songs that are already on the iPod. This is NOT desirable. We've downloaded and installed iTunes onto the 2nd computer and used the same login account that we used on the first computer.
What gives!?!?! I thought this was supposed to be easy, but it's not! I was hoping for a quick and simple "plug it in and start listening to music." This is definately not quick and simple. Albeit, I'm new to this iPod craze, but this shouldn't be so difficult. I've poked around on the website and cannot seem to find an answer to this.
HELP!!!!
Thanks
oh btw, Is anyone else getting annoyed by Apple's rediculous attempt at monopolizing this market by forcing us to use thier own proprietary software?!?!

First of all, any computer that plays purchased content must be authorized. This can be accomplished by opening iTunes, then store>authorize computer. If you wish to use your iPod on more than one computer & not have your iPod content erased, you will have to have your iPod preferences set on "manually manage". See the following link.
http://docs.info.apple.com/article.html?artnum=61675
Also, it's not only Apple that uses proprietary software. How about Zune players, & several others?
Message was edited by: StarDeb55
Message was edited by: StarDeb55

Can i use adobe cloud on more than 1 computer?

can i use adobe cloud on more than 1 computer?

Ask in the Cloud Forum http://forums.adobe.com/community/creative_cloud
-and http://forums.adobe.com/community/creative_cloud/creative_cloud_connection

Can you get an Apple ID for corporate use to associate with more than 10 devices?

Can you get an Apple ID for corporate use to associate with more than 10 devices?

I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
Regards.

How to use same page fragment more than once in a page,

Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satya

java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
   type: RichDocument[UIXFacesBeanImpl, id=d1]
    +id: j_id_id5
     type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
      +id: j_id0
       type: javax.faces.component.html.HtmlOutputText@bc252
    +id: m1
     type: RichMessages[UINodeFacesBean, id=m1]
    +id: f1
     type: RichForm[UIXFacesBeanImpl, id=f1]
      +id: pt1
       type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
        +id: ps1
         type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
          +id: pt3
     at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
     at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
     at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
     at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
     at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
     at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
     at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
     at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
     at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
     at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
     at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
     at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
     at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
     at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
     at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
     ... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean

Help in using listagg function for more than 8000 char.

Hi Friends,
Need you urgent help in using listagg function for more than 8000 char.
I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error,
I checked the listagg function is having limitation of 4000 char.
I tried but I am unable to achive this. Can someone provide me a sample example to achive this
select d.dname,d.loc,e.hiredate
,listagg(e.ename,',' ) within group (order by e.deptno) over (partition by e.deptno) as e_orig
,listagg(e.ename, ',') within group (order by e.sal) over (partition by e.deptno) as d_orig
from emp e, dept d
where e.deptno=d.deptno;[ This is my first post, I gone through the guideline for posting a post , and try to go according to that ( I have not pasted here create table and insert as I have used basic table emp, dept for example), please let me know if still I should give this, I will take care from my next post ]
Thanks in advance

Interesting, I didn't know you could do that, but...
BluShadow wrote:
You could write some PL/SQL code that does it all for you, but that would involve loops and would be slow.Well, objects are written in PL/SQL aren't they? And presumably there'll be implicit looping too? So it's not at all obvious that this method will be faster than doing the joining in PL/SQL in memory. The only way to find out is to benchmark them - so I have done that.
I noticed that OP's ref cursor actually only ever retrieves a single record for a bound department number, so I decided the best thing would be to test using a procedure that passes an output string back. I selected all (109) employees and put spaces in to ensure above 4000 characters. I also noticed that as he is using PL/SQL he probably can use a VARCHAR2 type, but just not ListAgg in the query, so I wrote short procedures as follows:
SimpleAggChr     - bulk collect and array processing, VARCHAR2 output
ClobAggPrc     - the custom aggregation method, CLOB output
SimpleAggClob     - bulk collect and array processing, CLOB output
I then wrote a driving script that calls them in the order above and times each call (I like benchmarking so I have my own timing object to make it easy). I then print the lengths for checking, and my object writes the timings to my output table. Running a few times I got varying results, but generally it looks like there isn't a lot to choose between them for performance.
Here's the procedure code:
CREATE OR REPLACE TYPE char100_list_type AS TABLE OF VARCHAR2(100)
CREATE OR REPLACE PROCEDURE SimpleAggChr (x_out OUT VARCHAR2) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggChr;
CREATE OR REPLACE PROCEDURE SimpleAggClob (x_out OUT CLOB) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggClob;
SHO ERR
PROMPT ClobAggPrc
CREATE OR REPLACE PROCEDURE ClobAggPrc (x_out OUT CLOB) IS
BEGIN
SELECT clobagg(first_name || '                                        ' || last_name || ',')
    INTO x_out
    FROM employees
   ORDER BY salary;
END ClobAggPrc;
SHO ERRand the driving script:
SET SERVEROUTPUT ON
SET TIMING ON
DECLARE
l_enames_c1     CLOB;
l_enames_c2     CLOB;
l_enames_v     VARCHAR2(32767);
l_timer     timer_set_type := timer_set_type ('Aggregation');
BEGIN
Utils.g_id := 'Aggregation';
SimpleAggChr (l_enames_v);
l_timer.Increment_Time ('SimpleAggChr');
ClobAggPrc (l_enames_c1);
l_timer.Increment_Time ('ClobAggPrc');
SimpleAggClob (l_enames_c2);
l_timer.Increment_Time ('SimpleAggClob');
DBMS_Output.Put_Line ('SimpleAggChr returned string of length ' || Length (l_enames_v));
DBMS_Output.Put_Line ('ClobAggPrc returned string of length ' || Length (l_enames_c1));
DBMS_Output.Put_Line ('SimpleAggClob returned string of length ' || Length (l_enames_c2));
l_timer.Write_Times;
END;
SET TIMING OFF
SET LINES 150
SET PAGES 1000
COLUMN id FORMAT A30
COLUMN line_text FORMAT A120
SELECT line_text
FROM output_log
WHERE id = 'Aggregation'
ORDER BY line_ind
/and the results:
SimpleAggChr returned string of length 5779
ClobAggPrc returned string of length 5779
SimpleAggClob returned string of length 5779
PL/SQL procedure successfully completed.
Elapsed: 00:00:27.05
LINE_TEXT
Timer Set: Aggregation, constructed at 03 Nov 2011 16:27:07, written at 16:27:35
================================================================================
[Timer timed: Elapsed (per call): 0.02 (0.000016), CPU (per call): 0.01 (0.000010), calls: 1000, '***' denotes corrected
line below]
Timer              Elapsed          CPU          Calls        Ela/Call        CPU/Call
SimpleAggChr          9.84         0.36              1         9.84400         0.36000
ClobAggPrc            9.37         0.32              1         9.37400         0.32000
SimpleAggClob         8.25         0.22              1         8.25000         0.22000
(Other)               0.00         0.00              1         0.00000         0.00000
Total                27.47         0.90              4         6.86700         0.22500
13 rows selected.

I've been using iMovie '09 for more than a year and now .MTS files won't upload?

I've been using iMovie '09 for more than a year and each time I would plug in my SD card (using a card reader) the import box would open and I could select the clips I wanted to work with. Now, suddenly, today the import box won't open. Why??? I literally just used the exact same method three weeks ago and it worked fine. I have not done anything differently. Also, when I go to "file > import from camera" it only shows the built-in camera. What am I doing wrong? And how do I get my files? I do not want to download a converter of any time. I know there has to be a way because it literally just worked three weeks ago so I'm just trying to figure out why it won't work now.

Unfortunately, you cannot upgrade to Safari 5 or 6 on Mac OSX 10.4.11 and that is what you need to access iCloud (http://support.apple.com/kb/ht4759). I am not sure, but maybe you can install another and newer browser version of Firefox or Chrome to access iCloud.

Using phone extensions or more than 1 phone socket...

Similar Messages

Maybe you are looking for