Using Phone Functions with Samsung a900

Hello all...
I have a Samsung a900 from Sprint, and just learned that I can use the phone functions in the Address Book app. I go to pair the device to my iBook, and type in my defined passkey, but nothing happens. And Bluetooth Setup Assistant says my phone only has "Use as a modem" as a service. Any ideas?
Thanks

If you don't have a screen protector, it is almost certainly a hardware fault..
Download an install the rootsh package from the app manager
Open an x terminal and run these two commands exactly
sudo gainroot
cat /proc/kmsg
Open and close the keyboard of your phone.. you should see lines like:
<6>[36064.929351] slide (GPIO 71) is now open
<6>[36069.546630] slide (GPIO 71) is now closed
when you open and close the keyboard.
Now, close the keyboard of your phone, and make a phone call (call your answer phone) (don't close the x terminal.. leave it running in the background)
Whilst the call is active, cover the top of your phone to cover the three sensors. Put your hand over the ear piece, cover from the charging light to the white nokia logo..
remove your hand and repeat a few times..
Now end the call and switch back to the x terminal.. you should see lines like this:
<6>[36056.476257] proximity (GPIO 89) is now closed
<6>[36057.241882] proximity (GPIO 89) is now open
<6>[36057.749572] proximity (GPIO 89) is now closed
<6>[36058.343322] proximity (GPIO 89) is now open
So.. if you don't see proximity lines then you've definitely got sensor issues and your phone needs to go back..

Similar Messages

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

Using modular functions with movieclips

hi guys, this morning i was looking a tutorial that shows how to make modular functions, the user only used numbers, i was wandering if there is a way to use this with movieclips or childs.
The example was:
function addNumber(num1:Number, num2:Number, num3:Number):void
trace(num1+num2*num3);
addNumber(3, 4, 7);
i tried using a movieclip called cuadro and triying to move on the x axis, but it didnt work out:
function mObj(obj1:MovieClip, num1:Number):void
obj1.x = num1;
addNumber(cuadro, 50);
any sugestion?
thnks in advance

oh sorry my bad, i was trying another stuff
i know that the last line must say
mObj(cuadro, 50);
what im trying to do is use the function with some objects in the stage, and for example when i press the first button, it will write mObj(cuadro1, 50) , button2 mObj(cuadro2, 80), so i can use the same function for diferents objects

Using Multiple Functions with in members selection of Hyperion Financial St

Hello everyone, I am trying to retrieve all the level 0 entity members from a specific Level 3 entity member. Can I use multiple Functions with in Report studio to do this?? Or is creating an alt hierarcy my only option?
Thanks

You can try doing System Defined member list Lev 0 AND Descendants of Lv 3 member
JTS

How to use aggregate function with Date

Hi All,
I have a group of date from that is it possible to Max and Min of date.
I have tried like this but its errored out <?MIN (current-group()/CREATION_DATE)?>.
I have also tried like this but it doesnt works
<?xdoxslt:minimum(CREATION_DATE)?>
Is it possible to use aggregate function with date values.
Thanks & Regards
Srikkanth

Hi KAVI PRIYA,
if date is not in cannonical format, how can we change it in BI publisher, then how to calcualte minimum and as well as maximum.
please advise me,
Thanks,
Sri

How to use TRUNC function with dates in Expression Builder in OBIEE.

Hi There,
How to use TRUNC function with dates in Expression Builder in OBIEE.
TRUNC (SYSDATE, 'MM') returns '07/01/2010' where sysdate is '07/15/2010' in SQL. I need to use the same thing in expression builder in BMM layer logical column.
Thanks in advance

use this instead:
TIMESTAMPADD(SQL_TSI_DAY, ( DAYOFMONTH(CURRENT_DATE) * -1) + 1, CURRENT_DATE)

How can I use AGO function with aggregates

I use aggregated table and a detailed table
I have time hierarchy whose lowest level is date. For sales I
created year-to-year (YTD) comparision with AGO function. It
works OK.
BUT, I want to speed it up, so I used aggregates. I created new
time table grouped by MONTH and corresponding agg_SALES table. I
created connections and mapped the fields. It works OK for
normal queries, that means my queries at month level use
aggregates. BUT when I add YTD measures or YAGO measure in query, it goes to
then SALES table whose grain is date.
How can I force BI Server to use AGO function with aggregates?
I use OBIEE 10.1.3.4
Thank you
Ishaq
(Question originally taken from ITtoolbox and posted by Gorazd)
SORRY - THE QUESTION IS IN THE WRONG FORUM
Edited by: ishaq12 on Nov 19, 2008 12:21 PM

Hi,
you can not do it in Administration tool but you can set agregation for that field in Answers (fx->Agregation rule->Sum) and effect should be the same. Note that it may not work properly on Oracle 10g as generated SQL is not 100% recognized, on 11g everything is OK (at least in my case).
Regards,
Marko
Edited by: user10449532 on 2008.11.19 06:29

How to use INVOKE function with INT parameter types

Can you tell me how to use invoke function with int parameter type ?

Pass the int as an Integer.

C++: Is it possible using callback function with ncacn_http and rpcproxy server ?

I have a remote procedure and I can call it using http over rpc. I pass trough an rpc proxy server for arriving to my rpc server.
But I cannot call a callback function to my client inside the server function.
Is it possible using callback function with ncacn_http and rpcproxy server ?
We are using IIS on windows server 2008 R2 and the server rpc and the client on the same PC with rpc rpoxy.
If I use ncan_ip_tcp all works fine.
Thanks
Gianluca

Hi,
About the develop question please post to the MSDN forum.
MSDN forum Developer Network
http://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesVirtualNetwork&filter=alltypes&sort=lastpostdesc
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Use private function with interface

I'm working with ActionScript 2 and wanted to use an
interface for one of my classes. However, the functions that it
would define should be private in the classes that implement the
interface. The problem is that I can't define private functions in
the interface, and if I leave off any scope in the interface
("function findAndSetInformation():Void;") and make it private in
the implementing class ("private function
findAndSetInformation():Void {...") I get the error: "The
implementation of the interface method doesn't match its
definition.

WHATS UP ?? WHERE IS TEH MODERATOR ?!!!!
NO REPLY TELL NOW !!!!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Yh:
hi,
how can i used REPLACE function with LOB database item????!!!1<HR></BLOCKQUOTE>
null

How to use trignometric functions with MIDP1.0

HI ALL!
We designed midlet to run on a mobile phone using MIDP1.0. We have some additional trignometrical classes to integerate with the midlet. But we got astonished when we didn't find any trignometrical function in MIDP1.0 & CLDC1.0. It is now is a great panic for us.
It is very unbelievable that Sun Microsystem doesn't provide such classes with J2ME!!
Is there any way to define or get a free-ware trignometrical classes to use?
We hope reply from this Forum soon!

Mmmm....,J2ME currently doesn't support doubles,floats and if you want to use trigonometric functions then you will use cos, sin, tan, ctan,atan,acos,asin and this means doubles and floats....

Has anybody used phone functionality using the Palm or Pocket PC 2002 PDA modules?

NI don't know whether their PDA modules will allow use(API calls) of the phone functionality for the Pocket PC 2002 Phone edition or Palm OS's. Has anybody have experience of doing this?

The current PocketPC module does not support SmartPhone, but I think you can write your own library/C code to access the SmartPhone APIs, and wrap it with the Call Library Node to use it from LabVIEW PDA.
You have to install the PocketPC Smartphone SDK in order to use the APIs.
The same goes with the PalmOS module. It currently does not support PalmOS Telephony services but you can write your own code to access the Palm OS Telephony API and wrap it with a Call Library Node.
More info: http://www.palmos.com/dev/support/docs/palmos/TelephonyBasic.html

Problem using DECODE() function with a Query of Queries

I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:

<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">

So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!

DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil

Using EveryNCallback function with a C++ class (not VB)

Hello all,
I am trying to incorporate one of the ANSI C examples into my code which contains C++ classes. I receive errors because of having to declare the EveryNCallback and DoneCallback functions as static to keep their C function signature. This of course is not allowable when using these functions as members of a class. Could anyone help please?
Best,
Paolo

Firstly, thank you for the help. I have attempted to code the advice you gave but it still does not seem to compile properly. Can you suggest what is wrong with my code please?
Here is the code I am trying to configure:
forceDriver.h
static int32 CVICALLBACK static_callback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void* callbackData);
int32 EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples);
int32 DoneCallback(TaskHandle taskHandle, int32 status, void *callbackData);
forceDriver.cpp
DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent(taskHandle,DAQmx_Val_Acquired_Into_Buffer,2500,0,&forceDriver::static_callback,panel));
**START TASK**
int32 forceDriver::EveryNCallback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples)
panel->(member_function);
int32 CVICALLBACK forceDriver::static_callback(TaskHandle taskHandle, int32 everyNsamplesEventType, uInt32 nSamples, void* callbackData)
forceDriver* static_object = static_cast<forceDriver*>(callbackData);
return static_object->EveryNCallback(taskHandle, everyNsamplesEventType, nSamples);
where panel is the object I have created.

Using Javascript Functions with Flash 8

I wanted to know how to integrate Javascript functions with
Flash 8 created swf files. I assume this would be done using
ActionScript, I know some ActionScript but am not as familiar with
it as to be able to integrate other programming languages with it.
I'd like to be able to call other programming language functions
with my swf files.
The particular case I'm working on now is to be able to open
Pop-Up windows for display of web items from within links written
in ActionScript in a swf file. In other words, have the user click
a link in a Flash movie and open a window using a Javascript
window.open function that would be called. I would like the window
to contain more flash movies that contained further links to
functions. If any one could offer up some advice or point me to a
few tutorials and how tos on how to get the Flash part of this done
I'd appreciate it.
In a broader scope, a seemless workflow linking Flash output
files to outside scripting and programming functions would be nice
to know if anyone has links or input on where I can read up on
this.
Thanks

myButton.onRelease = function () {
getURL("javascript:myFunc('myVars')");
}

Using Phone Functions with Samsung a900

Similar Messages

Maybe you are looking for