Using phone mic while connected to external speake...

I want to use external speakers (the ones I use with my laptop - not Nokia, local manufacture) to hear calls and music but want to use the phone (E63) mic to talk.
When I connect the speakers I can hear the sound on the speakers but my mic gets deactivated.
Is there a solution to this?
PS. As soon as I connect the speakers E63 shows connect to a headset. Is there a way that it should change the enhancement to headphones or music stand?
Thanks!

when you insert headphone (3.5 mm ) jack into you phone, did your phone pops up any message (headphone, line out, music stand etc)? If not, reset yiur phone to defualt setting (factory reset and not soft or hard reset), and insert a normal headohone jack into your phone it should popup as mentioned above.
But this will not give other options when a defualt headset is inserted.

Similar Messages

Is there a way to connect an external speaker (for another room) through the headphone port

Is there a way to connect an external speaker (for another room) through the headphone port & still hear sound through the internal speakers? System Preferences/Sound/Output or Sound Effects allows you to use one or the other -- headphones or internal speakers. I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time. I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose. (10.7.4 Lion)

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Advice about using the laptop with closed lid while connected to external display

Hello all HP forum members!
I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the display in some way, as a result of the heat?
Thanks!

Hi @VVel ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
Control Panel - Power Options - upper left - Choose what closing the lid does.
Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Is there anyway to solve Wifi problem on Macbook while using it closed and connected to external display?

Hello,
I'm using my Macbook connected to external LCD while the screen of the Macbook is closed. So I can use the full screen resoluiton of my LCD. When not closed but connected the mirroring reduces the resolution and not useful.
But recently I recognized that when the Macbook screen is closed my fiber internet speed is down almost %50. When I test my fiber speed, when the macbook screen is open it's around 20mb/s, when the screen is closed and connected to LCD it's around 10 mb/s. I guess the wifi antenna is located at the screen I don't know. Is there any way to solve this probem? I want to use the lid closed without any sacrifice from my internet speed.
Thanks for any answers in advance

I have this same issue but what's strange is that it's only recently occurred since upgrading to FiOS's 50MB/s service. I was seeing 20MB/s WiFi speeds with my previous 25MB/s service. Frustrating!!

Problem while connecting to external DB using DB link

Hi,
We've recently upgraded SAP(4.6C) Oracle DB to 10g version. SAP is talking to an external DB which is on a 8.x version.
The following is the native SQL statement being used to select data from the external DB -
EXEC SQL PERFORMING APPEND_ISSUE.
      SELECT STOCK_NO,
             QUANTITY,
             SOURCE_LOCATION1,
             SOURCE_LOCATION2,
             JOB_CODE,
             ACID_CODE,
             EMPLOYEE_NO,
             SOURCE,
             ROW_ID,
             CIS_ORDER_NO
       INTO :WA_ISSUES
       FROM [email protected]
ENDEXEC.
FORM append_issue.
*-- Begin HD002666
SHIFT     wa_issues-quantity         RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-quantity         USING ' 0'.
SHIFT     wa_issues-source_location1 RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-source_location1 USING ' 0'.
SHIFT     wa_issues-job_code         RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-job_code         USING ' 0'.
SHIFT     wa_issues-acid_code        RIGHT DELETING TRAILING space.
TRANSLATE wa_issues-acid_code        USING ' 0'.
*-- End HD002666
APPEND wa_issues.
ENDFORM.
The DB link is running fine and we're able to connect to the external DB.
The 1st record from the extranl DB is read perfectly.
From the 2nd record, some of the numeric fields are reading a value '~'. We checked the external DB view SAP_TRUCK_INVENTORY_ISSUES_V and it has all non-null numeric values.
It's confusing that the 1st record has exactly the same values as the external DB, but from 2nd record onwards, it is reading some numeric values as '~'.
Is there any kind of internal conversion that is happening while reading data from SAP_TRUCK_INVENTORY_ISSUES_V into work area wa_issues.
Are there any problems faced with DB links b/w 2 Oracle DBs with version difference more than 1?
Any inputs on this would be helpful.
Regards
Deepthi.

Hi Rich,
Thank you for a quick reply,
Here is what I've done to connect to the remote ABAP system:
1. Configured this remote system in the SLD as a Technical System (SLD=> Technical Landscape).
2. Opened WebDynpro Content Administrator and created two JCO's for my application pointed to that remote ABAP system (defined in SLD). I was able to test them successfully reaching that remote system.
But when I run my application the same error occured.
What did I miss ?
Thanks & Regards,
Mike
Message was edited by: Mykhaylo Puzankev

Error while connecting to external SQL table using BCS identity in SharePoint 2010

Hi all,
I am working on SharePoint Foundation 2010. I have a stand alone setup. Now I am trying to connect to a SQL table in another server. I have used SharePoint Designer to connect using BCS. I have selected "BCS Identity" for authenticating with SQL
in the external content type. then I created a list with this external content type.
I get the following error upon opening the external list.
Login failed for user 'INYKGW\sp_farm'.
I am confused. how do I solve this error.
any help is greatly appreciated.
Thanks.

Hi letShare ,
Whether the account 'INYKGW\sp_farm' is current user account or a service managed account?
Could you please provide detail error message of ULS log to determine the exact cause of the error.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Also please have a look at the blog :
http://www.wonderlaura.com/Lists/Posts/Post.aspx?ID=82
Best Regards,
Eric
Eric Tao
TechNet Community Support

My headphone port no longer connects to external speaker

The external speaker works with my phone so I know the speaker works. The speaker doesn't work with the hdmi cable and was working right before I connected the cable. Now it doesn't work with iTunes or anything coming from the computer. Just my phone.

Hi inthetrees,
Happy New Year! If you are not hearing sound from your headphone jack on your computer, I have a few things you can try. First, disconnect the cable from the headphone jack and restart your computer. This might reset everything.
If that doesn't resolve the issue, take a look at the article below and confirm the sound output settings for your external speaker. The article is for our most recent operating system, but the instructions for accessing the sound settings is the same.
OS X Yosemite: Adjust your computer’s sound output settings
http://support.apple.com/kb/PH18960
You can play sound through your computer’s internal speakers, your display’s speakers (if it has speakers), or through speakers, headphones, or other equipment plugged into your Mac or available wirelessly through AirPlay.
Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output).
Choose a sound output device
From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices.
For any device plugged into the computer’s sound port, choose Headphones.
Adjust sound output settings
You can adjust balance and volume for sound output with the controls in the preference pane. If you select the “Show volume in menu bar checkbox,” a volume control appears in the menu bar so that you can turn the volume up or down from anywhere. To set a separate volume for alert sounds, click the Sound Effects tab.
Depending on your Mac and the devices you use, you may be able to set other volume options using the Audio MIDI Setup app.
If you use apps that have volume controls (for example, iTunes or iMovie), their settings can only be equal to or less than the computer’s output volume. They do not override the settings you choose in Sound preferences.
Adjust your computer’s sound input settings
If you can’t hear sound from your speakers
If a selected audio device reverts to another audio device
I hope this information helps ....
- Judy

Why does my macbook pro 13'' mid 2010 screen turns gray and freezes while connected to external monitor?

Every once in a while my macbook pro just randomly instantaneously freezes and the screen turns gray and it has only done it while connected to a high res 22'' Dell external monitor (so far). Usually when this happens I'm listening to music and I noticed my music continues to play but the keyboard is totally unresponsive forcing me to manually press the start button until the computer force shut's down. Luckily I havnt lost anything yet but I hate having to restart my macbook pro that way...just want to know if its a glitch in the software or if I have a more serious hardware problem. This problem has occured maybe 4 times since I got my macbook last summer 2010 so its not too bad, im just worried cause these computers aint cheap.

Duquan,
Macs can be picky about the RAM which they use; the “Your computer restarted because of a problem” message typically indicates a RAM problem. Since you have a Mid 2009 model, it should have 1066 MHz RAM installed rather than 1333 MHz RAM. If your RAM was mislabeled, then that might cast some doubt upon the quality control which that RAM manufacturer uses. My suggestion would be to purchase 1066 MHz RAM from a reputable manufacturer.

How to turn off display while connected to external monitor??

I'm running my macbook into an external monitor, using wireless mouse and keyboard. I want to get full power from my graphics card so would like to know how to turn the macbook screen off while connected to the larger monitor. I have read that simply closing the lid and then waking it with the mouse will work, however wont this activate the screen as well while the lids closed? Any advice would be great!
Thanks
Phil

Hi Philip
here is the link:
http://docs.info.apple.com/article.html?artnum=300562
And it won't turn the built screen on since macbook has sensor to prevent it turn on while it closed.
Good Luck.

Why do I get error "The LDAP server is unavailable" while connecting to external domain via sync connection in SharePoint UPSA ?

Hello,
I am trying to connect to external domain via UPS Account having "Replicate Directory changes" permission on external domain while creating sync connection in UPSA.
I have checked below URLS :
http://social.technet.microsoft.com/Forums/en-US/1912bf88-8fec-4b5d-9d1e-a42db8318e33/ldap-server-is-unavailable-sharepoint-2010-user-synchronization?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/en-US/6525d3aa-9197-42a2-aea0-190b84ac8356/the-ldap-server-is-unavailable?forum=sharepointadminprevious
And looks like its network connectivity issue - and hence I have verified that port 389 is open by infra team.
Note : I am able to connect to local AD , does it make sense that port is not open for external domain ?
Can anyone please let me know what can be the issue ?
Your help will be highly appreciated as I am struggling to fix this issue since quite long time but no luck yet.
Thank you in advance.
Kind regards,
Dipti Chhatrapati

Hi Dipti,
If you have Two-Way trust relationship then not sure if you have tried below:
Create a folder on the SharePoint server
Go to Folder properties - Security tab
Try adding user of the external domain on the folder
Please let us know if you are able to add the user or not. If you are able to add then it means that the connection and trust is proper and you should be able to create sync connection in UPA without any issues or else there is some issue with the connectivity
or the trust which is configured.
Please also make sure that you have given permissions to sync account as per below TechNet:
http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx
Replicate Directory changes permissions are also required on cn=configuration container, below are the steps:
Grant Replicate Directory Changes permission on the cn=configuration container
Use this procedure to grant Replicate Directory Changes permission on the cn=configuration container to an account.
To grant Replicate Directory Changes permission on the cn=configuration container
On the domain controller, click Start, click Run, type adsiedit.msc, and then click OK.
If the Configuration node is not already present, do the following:
In the navigation pane, click ADSI Edit.
On the Action menu, click Connect to.
In the Connection Point area of the Connection Settings dialog box, click Select
a well know Naming Context, select Configuration from the drop-down list, and then click OK.
Expand the Configuration node, right-click the CN=Configuration... node, and then click Properties.
In the Properties dialog box, click the Security tab.
In the Group or user names section, click Add.
Type the name of the synchronization account, and then click OK.
In the Group or user names section, select the synchronization account.
In the Permissions section, select the Allow check box next to the Replicating
Directory Changes (Replicate Directory Changes on Windows Server 2003) permission, and then click OK.
Kind regards,
Bhavik K Jain
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Error while Connecting to external content types using sharepoint designer 2013

I have a standalone development sharepoint server 2013.
After i installed BDC service, i try to create a external content list.
When i try to open the site in sharepoint designer i am getting the error like
"Could not establish Trust relationship for SSL/TLS secure channel with authority "sitename"
the underlying connection was closed:could not establish trust for SSL/TLS secure channel"
I tried creating Certificate in IIS8 adn added the certificate in manage trust in sharePoint central admin too and i have restrated IIS too.
But the issue is not resolved still.
PLease help me this.

May be you need to install certificate on server. Try below:
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
To local system
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
If this helped you resolve your issue, please mark it Answered

Error while connecting to external system in SM59 with ICM_HTTP_SSL_ERROR

Hi all,
we have configured an SM59 RFC destination of G type which pings to the external third party server. Before testing we have uploaded the external server certificate in PI system. it was working fine with * HTTP 200 OK* message. since 2 days we are facing the ICM_HTTP_SSL_ERROR while testing the connection. when we telnet from PI to the external system using the port no.443, its getting connected.
so any idea why it started giving the error.
We have check out this forums but of no help.
[ICM_HTTP_SSL_ERROR|ICM_HTTP_SSL_ERROR;
The trace file dev_icm says
[Thr 52] Thu Jan 20 14:34:00 2011
[Thr 52] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_CONNECTION_LOST
[Thr 52]    session uses PSE file "/usr/sap/XD1/DVEBMGS00/sec/SAPSSLDRV.pse"
[Thr 52] No Secude Error present in trace stack!
[Thr 52]   SSL_get_state() returned 0x00002141 "SSLv3 read server key exchange B"
[Thr 52]   SSL NI-sock: local=192.168.127.70:65243 peer=80.78.2.187:443
[Thr 52] <<- ERROR: SapSSLSessionStart(sssl_hdl=6000000000d50fd0)==SSSLERR_SSL_CONNECT
[Thr 52] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00370a03} [icxxconn_mt.c 1957]
[Thr 81] Thu Jan 20 14:34:15 2011
[Thr 81] IcmWorkerThread: end worker thread 53
[Thr 80] Thu Jan 20 14:44:45 2011
[Thr 80] IcmWorkerThread: end worker thread 52
Thanks,
Asem

Hareen,
We checked the the note 1318906 and followed the steps but error persists.
Could you please advice more on this.
Rahul,
The note you mentioned is for different error "ICM_HTTP_INTERNAL_ERROR".
Br
Asem

Hello, i got a new phone and while connecting to iTunes it didn't sync all the data. What do i do? I do not want to start over

can't sync my new phone to the data on the itunes. pls help

Just do this:
Connect your phone to your computer using the usb cable
Open iTunes and look on the left side for the name of your phone to appear (it will be shown under "Devices" when it is detected)
When you see it right-click your mouse on it and you will see a pop-up like the photo below. When you see this choose "Restore from Backup"
This will restore the data and settings from the backup of your old phone to your new one.

BINDUMP of content denied in the SMICM log while connecting to external sys

Hi,
Though this question is related to SAP XI, I feel this question can also be answered by people in ITS, so i am posting this in this forum.
In my current scenario where SAP XI system pushes data to another system(ABC system) using HTTPS connection. I have set up an RFC destination of Type G to connect to the external system.
When i do a Test connection, i see in SMICM log file, i found that connection established, request message written into ABC system.When response is being written i could find BINDUMP of content denied in the SMICM log file. What does that exactly mean..?
Also When i contacted the other party--ABC, they have told that they could not see any messages in their system.
XI shows successfully processed and ABC system did not receive the message... So where did the data go?? I have no clue :-(( Need your inputs in this regard. How to trace if the message has been successfully posted by XI. Below is the SMICM log file.
[Thr 5880] IcmConnConnect: direct connect to www2.ABC.com:443
[Thr 5880] nihsl-getHostAddr: found hostname '.www2.ABC.com' in cache
[Thr 5880] nihsi-getHostAddr: hostname '.www2.ABC.com' = addr 16.256.48.91
[Thr 5880] nihsi-getServNo: servicename '443' = port 01.BB/0443
[Thr 5880] NiCreateHandle: state hdl 23 / socket -1 NI_INITIAL
[Thr 5880] NiIBlockMode: switch off block-mode for hdl 23 / socket -1
[Thr 5880] NiLowLevCon: connect to: host 16.256.48.91, port 01.BB/0443, fam 2 (low adr..high adr)
[Thr 4532] [Thr 4532] NiISelect: fds in write-mask: [Thr 5880] NiIInitSocket: set default settings for socket 65268
[Thr 5880] NiISocket: hdl 23 got socket 65268
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 4532]
[Thr 5880] NiPConnect: connect in progress
[Thr 5880] SiPeekPendConn: connection of socket 65268 established
[Thr 5880] NiLowLevCon: took local port 10.1B/4123
[Thr 5880] nilh-localCheck: using local address list
[Thr 5880] NiSetStat: state hdl 23 NI_CONNECTED
[Thr 5880] ->> SapSSLSessionInit(&sssl_hdl=015BC3DC, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 5880] <<- SapSSLSessionInit()==SAP_O_K
[Thr 5880] in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 5880] out: sssl_hdl = 19193D20
[Thr 5880] ->> SapSSLSetNiHdl(sssl_hdl=19193D20, ni_hdl=23)
[Thr 5880] IcmPlCheckRetVal: Next status: WRITE_REQUEST(3)
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] MPI<12ee>0#7 GetInbuf 5 1489e0 2179 (1) -> 6
[Thr 5880] NiPBlockMode: set socket 65268 to NONBLOCK mode
[Thr 5880] NiPSockGetStatus: socket 65268 ok, no data pending
[Thr 5880] NiPBlockMode: set socket 65268 to BLOCK mode
[Thr 5880] IcmReadFromPartner(id=0/4693): fe-nihdl timeout
[Thr 5880] PlugInHandleServData: role: 2, status: 3, content-length: 0/0
buf_len: 2127, buf_offset: 0, buf_status: 6
[Thr 5880] HttpParseRequestHeader: content length: 1805
[Thr 5880] HttpParseRequestHeader: no transfer-encoding set
[Thr 5880] HttpParseRequestHeader: Version: 1000
[Thr 5880] HttpParseRequestHeader: Keep-Alive: 0
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetWrite(id=0/4693): HandleServData returned: 2
[Thr 5880] BINDUMP of content denied
[Thr 5880] IcmWriteToConn(id=0/4693): prepared to write data to partner (len = 2127)
[Thr 5880] ->> SapSSLWrite(sssl_hdl=19193D20, buf=061F8A74, len=2127, timeout=2000, &writelen=123EFF24)
[Thr 5880] <<- SapSSLWrite(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "written= 2127 of 2127 (all)"
[Thr 5880] IcmWriteToConn(id=0/4693): wrote data to partner (len = 2127)
[Thr 5880] MPI<12ee>0#8 FreeInbuf#1 0 1489e0 0 -> 0
[Thr 5880] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 5880] IcmReadFromConn(id=0/4693): request new MPI (0/0)
[Thr 5880] MPI<12ed>1#4 GetOutbuf -1 1489e0 65536 (0) -> 061F8A40 0
[Thr 5880] ->> SapSSLRead(sssl_hdl=19193D20, buf=061F8A74, maxlen=65483, timeout=500, &readlen=123EFEE8)
[Thr 5880] Fri Dec 02 08:59:10 2005
[Thr 5880] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] result = "max=65483, received=8036"
[Thr 5880] IcmReadFromConn(id=0/4693): read 8036 bytes(timeout 500)
[Thr 5880] BINDUMP of content denied
[Thr 5880] PlugInHandleNetData: role: 2, status: 1, content-length: 0/-1
buf_len: 8036, buf_offset: 0, buf_status: 0
[Thr 5880] PlugInHandleNetData: read response header
[Thr 5880] HttpParseResponseHeader: no transfer-encoding set
[Thr 5880] HttpParseResponseHeader: Version: 1000
[Thr 5880] HttpParseResponseHeader: Keep-Alive: 0
[Thr 5880] PlugInHandleNetData: more data to read
[Thr 5880] PlugInHandleNetData: need more data (7936/12484)
[Thr 5880] IcmPlCheckRetVal: Next status: READ_RESPONSE(2)
[Thr 5880] IcmHandleNetRead(id=0/4693): read_len: 8036, HandleNetData returned: 2
[Thr 5880] IcmHandleNetRead(id=0/4693): status 2 -> 2
[Thr 5880] ->> SapSSLReadPending(sssl_hdl=19193D20, &pendlen=123EFF1C)
[Thr 5880] <<- SapSSLReadPending(sssl_hdl=19193D20)==SAP_O_K
[Thr 5880] out: pendlen = 0
[Thr 5880] IcmHandleNetRead(id=0/4693): pending SSL data: 0, rollout=1
[Thr 5880] nihsl-getHostAddr: found hostname 'localhost' in cache
[Thr 5880] nihsi-getHostAddr: hostname 'localhost' = addr 127.0.0.1
[Thr 5880] NiIDgSend: re-connect dgram to: host 127.0.0.1, port FD.E6/64998, fam 2 (low adr..high adr)
[Thr 5880] IcmConnRollOut: connection (id=0/4693) rolled out:
[Thr 5880] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 5, r--, 00000000, rest 0 entries (0164FEF0)
[Thr 5880] IcmWorkerThread: Thread 6: Waiting for event
[Thr 4852] NiIPeek: peek successful for hdl -1 / socket 65588 (r)
[Thr 4852] NiIDgReceive - WAKEUP DGRAM received from:
host 127.0.0.1, port 07.B0/1968, fam 2 (low adr..high adr)
[Thr 4852] NiIPeek: peek for hdl -1 / socket 65588 timed out (r; 0)
[Thr 4852] IcmWatchDogThread: dg received
[Thr 4852] IcmWatchDogUpdateRollQueue(id=0/4693): insert fe-nihdl 23, flags=1
[Thr 4852] NiSelSet: hdl 23, r-, 01679D50
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4852] NiBufSelect: Postprocessing...
[Thr 4852] NiBufSelect: returning 1 clients
[Thr 4852] NiSelNext: returning hdl 23, r--, 01679D50, rest 0 entries (0164FF00)
[Thr 4852] IcmWatchDogThread(id=0/4693): nihdl 23 - data received(read)
[Thr 4852] NiSelClear: removed hdl 23 from selectset
[Thr 4852] IcmQueueAppend: Queuelen: 1
[Thr 4852] IcmCreateRequest: Appended request 8369
[Thr 4852] IcmConnRollIn: connection (id=0/4693) rolled back to status: READ_RESPONSE
[Thr 4852] IcmWatchDogThread: check ni handles (timeout=10000)
[Thr 4852] NiBufSelect: Preprocessing...
[Thr 4852] NiISelect: timeout 10000 ms
[Thr 4852] NiISelect: maximum fd=65757
[Thr 4852] NiISelect: fds in read-mask: [Thr 4152] IcmWorkerThread: worker 3 got the semaphore
[Thr 4152] REQUEST:
Type: READ_RESPONSE Index = 8368
[Thr 4152] CONNECTION (id=0/4693):
used: 1, role: 2, stateful: 0
NI_HDL: 23, protocol: 2
host: www2.ABC.com:443
status: READ_RESPONSE
connect time: 02.12.2005 08:59:08
WP-status: ROLLED IN (Context: 0, Role: 2)
tid: 15, mode: 0, uid: 746, roll-reason: ICM_ROLL_NONE
MPI request: <12ee> MPI response: <12ed>
request_buf_size: 2127 response_buf_size: 65484
request_buf_used: 2127 response_buf_used: 8036
request_buf_offset: 0 response_buf_offset: 0
[Thr 4152] ->> SapSSLRead(sssl_hdl=19193D20, buf=061FA9D8, maxlen=57447, timeout=500, &readlen=10BEFEE8)
[Thr 4852]
[Thr 4852] NiISelect: fds in write-mask: [Thr 4852]
[Thr 4152] <<- SapSSLRead(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] result = "max=57447, received=4548"
[Thr 4152] IcmReadFromConn(id=0/4693): read 12584 bytes(timeout 500)
[Thr 4152] BINDUMP of content denied
[Thr 4152] PlugInHandleNetData: role: 2, status: 2, content-length: 7936/12484
buf_len: 12584, buf_offset: 8036, buf_status: 0
[Thr 4152] PlugInHandleNetData: read response body (len=12484/12484)
[Thr 4152] PlugInHandleNetData: response completely read(EOS=0)
[Thr 4152] IcmFlushBuf: Flushing 12584 Bytes, buf_status: 6
[Thr 4152] flush buffer with mpi buffer id 1
[Thr 4152] MPI<12ed>1#5 FlushOutbuf l1 1 1 1489e0 12636 6 -> 061F8A20 0
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInHandleNetData: close connection
[Thr 4152] IcmPlCheckRetVal: Plugin retval: PLUGIN_RET_CLOSE (-702)
[Thr 4152] IcmHandleNetRead(id=0/4693): read_len: 4548, HandleNetData returned: -702
[Thr 4152] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4152] PlugInStopConn: role: 2, error: 0, write_err: 1
[Thr 4152] ->> SapSSLSessionDone(&sssl_hdl=015BC3DC)
[Thr 4152] <<- SapSSLSessionDone(sssl_hdl=19193D20)==SAP_O_K
[Thr 4152] NiICloseHandle: shutdown and close hdl 23 / socket 65268
[Thr 4152] IcmConnClose: Connection 0/4693 closed
[Thr 4152] IcmConnFreeContext: context 0 released
[Thr 4152] IcmServDecrRefCount: intersrv.afdb.local:443 - serv_ref_count: 1
[Thr 4152] IcmWorkerThread: Thread 3: Waiting for event
Cheers,
Siva Maranani

Hi,
My problem is solved.
I was not able to see the message in external system b'cos the XML document being posted to external server was an incorrect one. When we changed the payload and tested the scenario, its woking fine.
It did not have anything related to BINDUMP. BINDUMP error still exists even after successful post into external system.
Regards,
Siva Maranani

Use of KM to connect to External Document Repositories !!

Dear All,
I am evaluating the capability of KM as an integration layer to connect to various External Repositories (Lotus notes, File System, DB, DMS, Sharepoint repositories etc). I know there are various KM Repository Managers available which can help in connecting to other document systems, but am not sure how effective it is. What could be the potential issues?
Are there any major limitations with using KM as integration layer?
Appreciate your inputs.
Thanks
Sandip

Welcome to the forum.
However, as Claudio points out, this forum is for discussing the Adobe Forums, themselves.
I will Move your post to the LightRoom Forum, where you should get quick assistance. Your link, and any e-mail subscriptions will follow nicely.
Good luck,
Hunt
[Move to LightRoom Forum]

Using phone mic while connected to external speake...

Similar Messages

Maybe you are looking for