Using Photosmart 7350 with Win 7

Is there a way to use a Photosmart 7350 Printer with Win 7?
This question was solved.
View Solution.

Hi @Eagle82 , and welcome to the HP Forums.
I see you are looking into installation options. Due to the age of the printer, there is no HP software available.
You can, however, use an alternate driver to regain your basic print functions. I am linking a document below with instructions on setting an alternate driver:
Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection
Please let me know if you have any questions. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Problem using instant client with Win 7

Hi,
I have a Powerbuilder application that runs very well with Win XP and Oracle client 8 to 10.
With new computers (Win 7), we try to use instant client... but there are problems with accents ! In fact, all accents are replaced by a "¿" in the database.
It only appears when we are using our programs from a Win 7 machine with instant client.
Do you know if there is something to configure to solve this problem ?
Best regards.

user1931557 wrote:
Hi,
I have a Powerbuilder application that runs very well with Win XP and Oracle client 8 to 10.
With new computers (Win 7), we try to use instant client... but there are problems with accents ! In fact, all accents are replaced by a "¿" in the database.
It only appears when we are using our programs from a Win 7 machine with instant client.
Do you know if there is something to configure to solve this problem ?
Best regards.
If the characters only appear on certain clients, then they are NOT being "replaced ... in the database". What you are seeing is an issue with presentation, not data.

Portege R830 - Forcing mobile broadband to use 3G/HSDPA with Win 8

Greetings all,
Upgraded my Portege R830 to Windows 8 with no problem.
Since most of the Wireless Manager functionality has been moved into Windows, I can't find where I can 'force' the connection to 3G/HSDPA.
I live in an area where the signal is marginal and if I leave the network settings as default, it frequently switches to the stronger EDGE connection. With Wireless Manager, I connected using only 3G/HSDPA where 2 bars were sufficient for daily tasks.
Any light bulb moments? (Moving is unfortunately not an option ... ;) )

Hmm I think such setting isnt available in Win 8.
Microsoft provides a nice article about the broadband configuration using Win 8 and the mentioned configuration isnt there:
http://windows.microsoft.com/en-us/windows-8/mobile-broadband-from-start-to-finish
So from my understanding the best broadband signal will be chosen and used if its available.,

Using Cinema display with Win 8 Ultrabook?

Hello, can I use a Cinema HD display with a Lenovo U410 Ultrabook? It has 4 USB ports and 1 HDMI. Running Windows 8. Thanks.

I am having this exact same problem. 2010 iMac with NVIDIA GeForce 9400 256MB. I have it hooked to a 30" display through a DisplayPort to DVI-D adapter. The 30" is fine, but I have graphical corruption constantly on the main iMac screen.
This all started as soon as I updated to Yosemite a couple days ago.

How do you overcome problems using Photoshop Elements with Win 7 and Eyefinity display?

I have a 3 screen Eyefinity setup on a PC running 64bit Win 7 with 16gb RAM and an AMD Radeon 7950 graphics card and Phenom II x4 processor.
I struggle to get a stable PSE10 to work on this setup.
I bought a combined set of Photoshop and Premier Elements 10 and although installed it always crashed when I saved images with the error message "Adobe Photoshop Elements 10 has stopped working". I recently did a fresh install of Windows 7 and decided I had to solve the Photoshop problem.
I installed Premier 64 bit version from disk 2 and Photoshop Elements from disk 1 and then ran compatability checker. Under compatability settings for Win XP srv pack 3 it starts although with some toolbar errors and top and bottom of screen transparent instead of solid. I can save files worked on but then still get the error when I exit Photoshop Elements.
Has anyone had similar and solved the problem? Tech Support said my s/w was too old and unsupported without a service contract.

There should be no need for compatibility mode; pse10 is designed to run on W7. Try making a direct shortcut for the Editor. You can then launch the program directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files(x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
To launch, try right-clicking on the new desktop icon and choose “Run As Administrator” which often improves stability.

Question about using TX FM with Win

I am using the MuVo TX FM 256 with Windows 98, and so I am using Windows Explorer to transfer files, (I have not installed Creative software). There's no "Safely Remove Hardware" item that I know of. Is there anything wrong with just removing the player from the USB dri've without "warning" the machine in any way? I've been doing it this way for about one week now, without problems that I can see, (though the LCD screen sometimes darkens upon removal).
Another question, though this one is not something I'm immediately concerned with:When I fast forward in an mp3 longer than 7 minutes, the time does not update, (it shows the same time), until I let it "play" again, at which time it reads the correct time. Since it reads the correct time at all times except when it's fast forwarding or rewinding, it's nothing more than an inconvenience. Btw, it's firmware ..0, and I'd rather not change it since this works well enough, after reading about some of the firmware problems.
Joe

All the "safely remove" function does is shut the device down properly and close any program links with it.
If you aren't using the device at the time chances are things will be OK.

Using your remote with Win

First in winamp go to global hotkeys and enable them.
Now download intelliremote
http://melloware.com/download/
Install that and set it to run at startup. You can now use your remote to control winamp.Message Edited by robj20 on 06-06-2006 2:37 PM

Thank your for your nod. Intelliremote now works with X-FI too. Make sure to turn on Winamp hotkeys!
Intelliremote
http://melloware.com/products/intelliremotev2/

Photosmart 7350 Windows 8 driver

Will HP ever provide a driver so I can use my Photosmart 7350 with Windows 8? Just got a new laptop, and really like my 7350 - don't really want to buy another printer. Thank you, Denise

I got my HP photosmart 7350 printer working with windows 8 by using the Deskjet 5550 driver as an alternative. I followed the steps in this link for windows 7.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&lc=en&dlc=en&cc=us&lang=en&product=305...
Hope this saves some you hours of frustration.

Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.

Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.

RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

I use FF 20.0.1. How can I move my Favories and settings fron a laptop with Win 7 to a new laptop with Win 8. I can't find appdata on the Win 8 PC 8

I want to use Firefox on my Win 8 desktop. i want to move my favorites, settings and add-ons to a new Win8 laptop from my old Win 7 machine. I know how to do it with Win 7 machines by moving my profile. I can't find appdata on the Win 8 PC to move the profile to.
I will also want to do the same with Thunderbird.

The easiest way is to use Sync.
You can find it in Tools / Options.
You'll always have settins, bookmarks, saved passwords, history synced between you computers (and Android devices).

Can't install hp photosmart 7350 series printer on my hp laptop with windows 7 home premium

I am trying to install the HP Photosmart 7350 printer on my HP Laptop (serial number {Removed for privacy}; serial number{Removed for privacy}). The driver was not listed so I searched for a compatible printer. I found the Deskjet 5550 was compatible. I downloaded this driver then followed the directions for installing the alternate device. When I selected the Photosmart 7350, I was give the prompt that this device might be harmful to my hard drive. How can I install this printer safely? I do not have a disc with the printer. Do I need to get one or can you give me an alternative.

I also need a printer driver to connect an HP 7350 to a Windows 8.1 laptop.

Can I use a touch monitor with win 8.1 using bootcamp on MacBook Pro? Thanks.

I have a MacBook Pro late 2013. I have installed win 8.1 using bootcamp. Can I attach a touch monitor to use with Win 8.1?

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010 none of which can run Windows 8. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Fonts in graphs don't scale using firefox with Win 8

Using Win 8.1 and Mozilla Firefox, when I go to Yahoo finance to look at a stock graph, everything scales except the graph's labels for the axes. As an example, go to Yahoo finance (Yahoo.finance.com), click on Nasdaq (or any other), then under the graph on the top right click on 5d (or 1m or whatever). The graph will display correctly but the x-y axes labels are too small to read.
So far only IE has worked well with Win 8 after having adjusted zooms and fonts. Firefox had been my browser of choice. Please help me achieve this.

Sorry for the delayed response. Yes, there are other software with the same issue. Kaspersky, on-line Civilization (I don't play, but I downloaded it as an offer), and, yes, Adobe reader.
My guess is that Microsoft let go of the standard monitor pixel sizes (e.g. 768X1280 or whatever...) because there are so many different high density pixel screens (mine's about 1800X3200). Programs either choose to control the pixel density or it becomes an unknown variable dependent on each computer's screen resolution setup. For example, if I decreased the resolution to the 768x1280 setting, I could actually see a full screen Civilization window. In high resolution settings, it was a small box with microscopic letters.
If you get into the details of Firefox, there is a whole set of defined settings (see earlier in thread about "layout.css.devPixelsPerPx pref on the about:config"). While I like learning, sometimes knowing a thousand different settings is not the way I want to work on my computer. And none of it comes with definitions. I don't want to be a proud firefox web browser certified technician. But I appreciate firefox and am glad someone there does understand it. Actually, it would be fun.
Back to my issue with the yahoo finance and firefox, it is more confusing because most of the webpage is normal sized while some of the inner graph fonts are microscopic. Changing the screen resolution has no effect on it. Playing with the screen resolution changed the sharpness of the firefox fonts. Right now it's fuzzy and I'm uncertain it will sharpen when I restart my computer.
So, in short, I don't have a clue.

How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
Am I overlooking something? Should I need to prepare the image in a different way? (Sysprep differently?)
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
Can you specify the error which you are facing during VDI setup for server 2012?
I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly.
Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
Please check beneath article for information.
Windows
Server 2012 2,500-user pooled VDI deployment guide (Doc)
Single Image Management for Virtual Desktop Collections in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki

Using Photosmart 7350 with Win 7

Similar Messages

Maybe you are looking for