Using physical standby to upgrade to the next major release

Hi
Can one use a physical standby to upgrade from 9i to 10g or from 10g to 11g ?
We cannot use logical standby due to datatype problems
Thanks
Orna

You can use logical standby to perform a rolling upgrade, if you are above 10.1.0.3 - see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_RollingUpgradeBestPractices.pdf
Also see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_TransientLogicalRollingUpgrade.pdf
HTH
Srini

Similar Messages

Is their roadmap for the next major release of Netweaver stack?

In the ERP area, I found this link that mentions a roadmap for mySAP ERP2005 and beyond.
Is there a corresponding "beyond NW04s" roadmap? Or is the next major release of Netweaver targeted for 2010 as is the next major mySAP ERP release mentioned in the above mentioned roadmap?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5bd723c2-0d01-0010-97a5-cb14fe7f2810">mySAP ERP2005 roadmap and beyond</a>

Tobi, I can't go too far into it, but I can assure you that the next major release of Netweaver will not be in 2010. The idea is that you will be able to upgrade your Netweaver layer without upgrading the core(ECC). That means that you can stay current with technology while your business stays the same. So there will be Netweaver releases every so often before 2010.
Regards,
Rich Heilman

JSE 6 needed for the next major version of the Mac SAPgui

Apple has a developers' preview version JSE 6, but they don't yet support it. Hence, the Mac version of the Java SAPgui doesn't yet use JSE 6, even though the Java SAPgui on other platforms does use JSE 6. It is likely that by the time of SAP's next major release of the Java SAPgui, Apple will support JSE 6 and the Mac SAPgui will require it.
Currently Apple's implementation of JSE 6 requires a 64-bit Intel processor running Leopard. If this remains true in Apple's final release of JSE 6, then the next major release of the Mac SAPgui won't run on any MacOS X prior to Leopard and won't run on PowerPC or 32-bit Intel based Macs even with Leopard.
I'm told that Sun has both 32-bit and 64-bit JSE 6 JVMs for Windows, for Linux, and for Solaris.
My organization (MIT) has submitted a bug report to Apple about this. It is possible that Apple might pay more attention if a number of their customers made a joint request.
If your organization would be interested in joining such a joint request to Apple to support JSE 6 on (at least) all supported Leopard platforms, please let me know.
Thanks.
/David Rosenberg    <[email protected]>
P.S. If you work for Apple and you think you might be able to help with this, please contact me.
/David

Here is the current situation with respect to SAP's Mac JavaGui and
Apple's Java SE 6, as I understand it:
a. The SAPgui for Java 7.20 is planned for the fourth quarter of
   calendar 2008.
b. SAP's support for the SAPgui for Java 7.10 is planned to end on
   31-Dec-2008.
c. The Mac SAPgui for Java 7.20 will be able to use Java SE 6.
d. SAP has not yet decided whether the Mac SAPgui for Java 7.20 will
   also be able to use an earlier version of Java (i.e. J2SE 5.0).
e. Apple's Java SE 6 is only available for Mac OS X 10.5.2 and later
   on 64-bit Intel-based Macs (not PowerPC-based or 32-bit Intel-based
   Macs). Apple has not mentioned any plans to support Java SE 6 on
   any PowerPC-based or 32-bit Intel-based Macs or any Macs running
   Tiger, although there is a possibility that Apple might announce
   support for some of those platforms at their upcoming Worldwide
   Developers Conference (June 9-13, 2008, in San Francisco).
f. Sun has both 32-bit and 64-bit JSE 6 JVMs for Windows, for Linux,
   and for Solaris.
g. The last PowerPC-based Macs (Power Mac G5) were sold in August 2006
   and the last 32-bit Intel-based Macs (Mac mini) were sold in August
   2007.
h. Assuming that the Mac SAPgui for Java 7.20 will require Java SE 6
   and Apple doesn't extend their support of Java SE 6 to other
   platforms, then as of 1-Jan-2009, you won't be able to run an
   SAP-supported version of the Mac SAPgui for Java on PowerPc Macs
   bought as recently as August 2006 or 32-bit Intel Macs bought as
   recently as August 2007 or on any Macintosh running Tiger.
Best regards,
/David M Rosenberg         <rosenberg at mit.edu>

Can we patch Applications(ADPATCH) with no downtime using physical standby

Hi ,
As I know I can user Physical standby database for upgrade database with minimal downtime . Can I use the same with patching Oracle application using adpatch.
In other words can we patch Application (using Adpatch) with no downtime using physical standby .
Thanks in advance .
Best Regards,

In other words can we patch Application (using Adpatch) with no downtime using physical standby . No.
Business Continuity for Oracle Applications Release 11i, Database Releases 9i and 10g [ID 216212.1] -- Section 4: Applying an Applications Patch
Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC [ID 452056.1] -- Procedure 4.4 - E-Business Suite Patch Application
Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1] -- Section 7: Oracle E-Business Suite Maintenance with Standby Database
Thanks,
Hussein

I would like to upgrade to the next step, but because I have many problems with the version 10.4.11, I'm worried that upgrading would create more problems.

Due to a misunderstanding with [email protected] in September of 2010, many of my applications and important files were put into the trash during a cleaning. The trash hadn't been deleted, so a CleanApp rep told me to drag my important files to a folder on my desktop. They were unable to help me with anymore advice with the exception that if I followed the pathway of the application, I could manually restore it to its proper location.
This was asking a lot of me because I didn't have the experience or knowledge of undertaking such a massive restoration. However, I did the best I could. What had been put in the trash was not just a few files -- there were hundreds of files or apps that I discovered in the trash. As I said, this was a misunderstanding. I was left feeling devastated at what had happened.
Since then, my iMac Intel Core Duo has been running on its last legs. I'm surprised I can even get to my email. As far as using the software that I bought with my iMac, I can't. I just do the basics.
What I have been wanting to do is to upgrade to the next level. However, I worry that if I upgrade a crippled OS X 10.4.11 Tiger, I would be creating more problems than what I already have. Do you agree that an upgrade would make matters worse?

It won't necessarily make it worse, but may not make it better. I am not familiar with the utility you usedm though anything that cleans or maintains your Mac should be avoided unless you know what you are doing and what it does. Probably re-installing software from the official sources (download or CDs) is the best way to ensure missing parts are all replaced.
If this is a core duo and not a core 2 duo then the highest you can go is Snow Leopard 10.6 Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).

Does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level?

does the basic photoshop CC include the Stencil.std font or do I need to upgrade to the next level for individual at $19.95?

Here's a list of fonts included with Photoshop CS6
Fonts Included with Photoshop CS6 and Photoshop Elements 10 | Techinch
I'm not sure if Adobe has a list of what they bundle in CC,but I will ask.
And here we go: Photoshop: What fonts are Included with Photoshop?
Gene

When i upgrade to the next version of firefox, all of the web sites i had pinned to firefox on the Windows 7 task bar disappear

I accept the offer to upgrade to the next version of Firefox

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

When will the next ESR release be available?

Hi - I am writing some GUI based code and plan to release towards the end of the year. I imagine that a new FF ESR will be available by then. When will the new version of FF ESR be available so I can try and ensure that we test our GUIs using it? Thanks in advance!
F

hello Dubrovsky, the next major ESR version will be firefox 31, which is going to be released on july 22nd. automatic updates for ESR users on the current 24-brach to 31 will be starting mid-october.
so you should test the code against firefox 31, which is currently in the nightly stadium: nightly.mozilla.org

Apple pls look here: Some "quick wins" for the next firmware release

Hi!
First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
+ Please add an option to turn off that "screensaver" or to change the time until it turns on
The "screensaver" wouldn't be that bad when:
+ It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
+ The screensaver clock would display 24h format, when configured
Best regards, Jens

It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
Please use this link.
iPod Feedback.

Upgrading from 10.2 to 11.2 using Physical Standby

Hi
We have a 10GR2 EE database in a RAC cluster and we want to upgrade the 10GR2 database to 11GR2 non-RAC on a different server.
We'd prefer to do this using a Physical Standby to avoid down time as much as possible.
Any suggestions as to the best way to do this?
Thanks

I was sent the following which applies (page 156 on)
https://apex.oracle.com/pls/apex/f?p=202202:2:0:APPLICATION_PROCESS=downloadFile:::F20225_ID:1301

I have OS X 10.5.8. How do I upgrade to the next OS X?

I have OS X 10.5.8. I want to upgrade / update to the next OS X. Firstly, which OS X is the latest that I can use for a MacBook Pro 5,1?

Your macbook supports 10.8.x which is the newest Mac OS. You need to contact apple buy a disc for 10.6 and install that then do software updates to 10.6.8 and then go on the mac app store and buy mountain lion (10.8).

Restore primary database using physical standby

hi,
i am taking rman backup on production database,we have physical standby.coming month i have to take backup from standby instead of prod db.pls advise me, is it possible to restore and recover production database using standby database backup.if production crashed.pls advise me .i am new to dba.if possible pls provide proper steps.
Regards
Faruk

Faruk.m wrote:
hi,
i have to take backup on standby instead of production.failover i can do.but i need to know the recovery procedures from standby.and thank u for reply.i want, is it possible to restore my production controlfile with controlfile backup from standby.
i tested with my local database ,that below:
1.backup with controlfile from standby (rman>backup current controlfile)
2.manual deleted my test db controlfile,tried to restore from backup taken from standby(rman>restore controlfile from '*****************';)
3.rman>restore database
3.but it shows error (datafile already exists) ,controlfile tried to create datafiles on standby location.
my conclusion:above my cmds used to create datafiles on standby becoz i restored with standby controlfile.
my question:what is wrong with my steps? and how to restore my (prod) controlfile from standby.and bring backup my prod db.
regards
farukHi Faruk,
Sorry my late.
I can share with you my test.
It is my standby database, I connecting with RMAN
SQL> select database_role, db_unique_name, name from v$database;
DATABASE_ROLE      DB_UNIQUE_NAME           NAME
PHYSICAL STANDBY       stldb                    ADMDB
[oracle@oel62-x64 oradata]$ rman target /
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Apr 23 12:23:00 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ADMDB (DBID=4063877183, not open)
RMAN> backup current controlfile;
Starting backup at 23-APR-13
Starting implicit crosscheck backup at 23-APR-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=29 device type=DISK
Finished implicit crosscheck backup at 23-APR-13
Starting implicit crosscheck copy at 23-APR-13
using channel ORA_DISK_1
Finished implicit crosscheck copy at 23-APR-13
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
channel ORA_DISK_1: starting piece 1 at 23-APR-13
channel ORA_DISK_1: finished piece 1 at 23-APR-13
piece handle=/u01/app/oracle/fast_recovery_area/stldb/STLDB/backupset/2013_04_23/o1_mf_ncnnf_TAG20130423T122310_8qdfq19x_.bkp tag=TAG20130423T122310 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 23-APR-13
RMAN> exit
Recovery Manager complete.
[oracle@oel62-x64 oradata]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Tue Apr 23 12:23:26 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> shut immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 551165952 bytes
Fixed Size              2230232 bytes
Variable Size            167774248 bytes
Database Buffers       377487360 bytes
Redo Buffers              3674112 bytes
SQL>
SQL>
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@oel62-x64 oradata]$ rman target /
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Apr 23 12:34:58 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ADMDB (not mounted)
RMAN> restore controlfile from '/u01/app/oracle/fast_recovery_area/stldb/STLDB/backupset/2013_04_23/o1_mf_ncnnf_TAG20130423T122310_8qdfq19x_.bkp';
Starting restore at 23-APR-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/u01/app/oracle/oradata/stldb/control01.ctl
Finished restore at 23-APR-13
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> exit
Recovery Manager complete.
[oracle@oel62-x64 oradata]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Tue Apr 23 12:35:31 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select database_role, db_unique_name, name from v$database;
DATABASE_ROLE      DB_UNIQUE_NAME           NAME
PRIMARY       stldb                    ADMDB
As show here, you can backup standby control file, and restore as primary .
Regars
Mahir M. Quluzade
http://www.mahir-quluzade.com

How can I use my Mac OS X for the next time

Dear sir,
Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer.
By the way... I already installed the Mac OS X to my MacBook Pro so please I'm waiting for you advice.
Mohammed Hussein

Hi,
He bought the iMac two years after mine.
Would his Mac still be under warranty? It sounds like it is about only a year old and so may be still eligible for phone support, though that may depend on having nearby access to an Apple Tech support.
He could get a replacement disk sent to him as well. The cost, I don't know.
Your disk would probably work, but you don't need to burn one; just use yours. If you are in two locations, then it would be better for Apple to mail him a replacement disk for his particular Mac.

HT5167 I have OS X 10.5.8 now. What do I need to upgrade to the next newer version?

Hello,
I need to upgrade my iMac to a newer OS. I have version 10.5.8. Whatis the next version I need to upgrade?
Thanks

Welcome to the Apple Support Communities
http://support.apple.com/kb/sp575 If the Mac is compatible, call Apple to buy Mac OS X Snow Leopard. Make a backup, insert the DVD and upgrade. Finally, go to  > Software Update and install the most recent version.
http://www.apple.com/osx/specs If your computer is supported, open App Store and purchase Mountain Lion. See if your programs are compatible > http://www.roaringapps.com

Is it possible to just upgrade to the next version?

I have version 3.1 of Aperture and just bought a MacBook Pro with Retina would like to upgrade to the latest version, but cannot find an upgrade option. Does anyone know if this is possible?
Thanks
Shirley

Is Aperture installed on the new machine yet? If so run Software Update you should get the latest version of Aperture for your system.
If not, install from the original media you have for it and then run Software update.
BTW what is the version of OS X that you are running?

Using physical standby to upgrade to the next major release

Similar Messages

Maybe you are looking for