Using pins in maps

Hi, is there a way to get the iphone to drop a pin on all your contacts on maps in one go? also every time i have added a pin it vanishes when i cut out of maps, any reason why this may be? would appreciate any help.

Hey Pilsbury1981,
You can select a contact from the address book to pull up their location on Maps without typing it in, but there is no way to pull up locations for all contacts or a group of contacts.
You can request this feature added to the iPhone online here: http://www.apple.com/feedback/iphone.html
Jason

Similar Messages

I want to delete a pin in Maps

I've created some pins in Maps that I want to remove, but this is no longer possible. I've Googled it several times, but none of the answers apply. I guess this has been changed yet again in iOS8. I'm gathering that Apple doesn't want it's users to just be able to do something basic that should be simple, and maybe even stay the same way over time, but what would be the challenge in that?

Some of both, I think. The ones that are bugging me right now are the ones you see when you do a Search listed as potential places, probably based on a previous search. But I'd like to be able to remove any kind of pin that is no longer useful. I googled and one suggested that I go to a place and click on "Recents", but the only recents I see are the list that automatically appears when I start a search, which are not labeled, just listed. The other method suggested I click on the "blue arrow" somewhere, which I didn't see when I went there. I gather that this procedure has changed many times, probably with every update of Maps, which is making it more difficult than it should be. I'm using 8.02 right now.
If you know of a way to do this, I would be most appreciative.

Trying to remove red pin from Maps, there is no button to remove it, folks . . .

Have had my iphone 4 for eight months. Updated to iOS 5 recently. Didn't have this problem before but I am UNABLE to remove the red pin from Maps.
Turned my phone off completely, and it seemed to remove the red pin on turning it back on. But this is not a convenient maneuver. I was able to drop a purple pin and remove it. But once a red pin is down, THERE IS NOTHING THERE TO REMOVE IT. I'm certain that there is a bug here that needs to be fixed.
Option 1 under "Directions", tap on the red pin, tap on the blue arrowhead, tap "remove pin" - - - but there is no such button to "remove pin".
Option 2, under "Directions", tap on "edit", I thought there used to be a blue "clear" button to remove everything, but there is none.
Instead under "Directions", tap "edit", tap the grey circle with a "x" inside to remove the address, but it does not make it go away, and the red pin always comes back. The blue cancel button on upper left hand corner also does not remove the red pin.
Please help. I already read multiple postings on this. I have not found the correct answer for my question. Thx.

There's no way to remove it. Either ignore it or update.

How to use the 'DatabaseOperation' mapping in iStudio?

I'm still a novice in using iStudio and would like to use the 'DatabaseOperation' mapping - but so far I've had no joy. For Test purposes I have created a function:
FUNCTION test_value (p_operator_name IN VARCHAR
, p_status IN VARCHAR) RETURN VARCHAR IS
l_return varchar2(100);
BEGIN
l_return := 'This is a test';
RETURN l_return;
END;
iStudio
Destination Field
$Test.s1
Source Field
DatabaseOperation (operator_name, status, "oaihub902", "***password", "***host", "1521", "***SID", "thin", "5", "20", "begin test_value(operator_name,status);end;")
Error
oracle.oai.agent.server.transform.database.DBTransformationException: PLSQLTrans
formation.transform: Transformation failed
I can't find any documentation on how to use this mapping .. so any help would be appreciated.
Cheers
Ed

I agree. The documentation is sketchy.
One point. Consider developing your own custom transformations instead of using the Database Operation transform.
I'm not sure about your client, but mine does not like having any passwords in the clear.
Also, custom transformations are portable from one environment to another. You often find that having to recode usernames and passwords within the Database Operation transformation from your DEV > TEST > PROD systems a bit of a pain.
HTH
Yan

How do I change the name of a 'pin' in Maps?

The 'Help' feature doesn't seem to have the answer. Maps needs help in 'Help.'

Hi Lockard,
If you are having issues with pins in Maps, you may find the following article helpful:
Mac Basics: Maps app helps you find your destination
http://support.apple.com/kb/HT5973
Regards,
- Brenden

Functions used in Java mapping

hi
If anybody has worked on Java mapping, Can anybody tell me the common functions that are used in Java mapping along with some examples
Also how java mapping is more useful as compared to XSLT and ABAP mapping, when to use java mapping and some demo example on java mapping if available
Thanks & regards,
Loveena.

Hi Loveena
refer these Blogs for Step-via step for java mapping
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
<b>Java Mapping (Part I)</b>
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/javaMappingusingDOMParser&
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/binary%2bconversion%2bin%2bxi%2b-%2bjava%2bmapping
JAVA Mapping :If you have complex mapping in your scenarios and also some times if you have more than 100 field to map then better to choose the JAVA MApping
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but, DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exactly easy to develop either.
DOM and SAX are APIs
In NWDS we have to develop the mapping and create jar and archieve and import it under Iported archieved in IR. this can be used in Interface mapping.
See the below links so that you can have screen shots,...
Java Mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
Re: java ,abap and XSLT mapping
Re: java ,abap and XSLT mapping
Re: When to Use XSLT,Java or Graphical Mapping
mapping
Testing and Debugging Java Mapping -/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
Thanks !!
Regards
Abhishek Agrahari

What is use of Active mapping in ODi interfaces?

hi,
What is use of active mapping in ODI interfaces ?
What are the advantages of using active mapping?
If active mapping is not used in ODI ,would it affect ODI code in some sense?
Thanks,
Mahesh

MaheshGx wrote:
hi,
What is use of active mapping in ODI interfaces ?This ask ODI to generate for for the mapped column . Other wise no code will be generated .
What are the advantages of using active mapping?If you want to generate code use active mapping .
If active mapping is not used in ODI ,would it affect ODI code in some sense?
It will not generate the code
Thanks,
Mahesh

File to File using BPM & value mapping

Hi,
   I have the following scenario to do. sample file structure is given below.
source:
HDR   13052008INDIA
BDY   123456
BDY   1234567
EOF
Target:
HDR 2IN BDY 123456 EOF
HDR 2IN BDY 1234567 EOF
for the above mentioned source and target mapping. we have to use BPM and value mapping.
In the HDR row 13052008 is the date value this has to be passed to RFC function module and it will return 2, this value has to be mapped to target
And INDIA has to be mapped to IN using the value mapping option. similarly we have many coutry code.
could anyone let me know the step by step procedure to achieve this, I followed the blog https://weblogs.sdn.sap.com/pub/wlg/1926. [original link is broken] [original link is broken] [original link is broken] but it does not fit to my scenario.
help is appreciated.
Regards
RDS

Hey,
     This is a normal file to file scenario.
     You need to use RFC look up instead of value mapping.(as you need to extract 2 and IN from an RFC)
There is no need for a BPM.
refer to this blog(for RFC look up)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
this will solve your problem.
Output of RFC look up will be 2 and IN . So use the concat function.
Other values map them directly from source to target.
Also, set the occurence for the target structure as 0 to unbounded in the mapping.(this is to be done in order to have one file for each record of the source)
You also need to configure file content conversion.(both at sender and reciever side) to convert the text file to XML on the sender side and then XML to text at the reciever side.
refer to this link for FCC.
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
This is for sender file content conversion.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
This is for reciever FCC.
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
reward points if useful.
regards,
       Milan

Mapping Split using the Graphical Mapping Tool

Hello,
I am a little confused right now... so I turn to you for help!
I found this excellent blog:
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
It details how to do a message split using the Graphical Mapping Tool. WHich is exactly what I want!
But then I found this on help.sap.com:
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/frameset.htm
Which states that:
Messages cannot be sent by using different Adapter Engines in a mapping-based message split. This affects configuration thus: All receiver agreements that have a receiver interface from the mapping entered in the key must only be assigned communication channels with the following adapter types:
-          RFC Adapter
-          SAP Business Connector Adapter
-          File/FTP Adapter
-          JDBC Adapter
-          JMS Adapter
-          SOAP adapter
-          Marketplace adapter
-          Mail Adapter
-          RNIF adapter
-          CIDX Adapter
I have a simple mappling split where I want to take a file containing multiple materials and send them one by one to a PROXY into SRM. To send to proxy I want to use the HTTP adapter which is not listed above. BUT if I read it correctly it will work, as long as I dont try to do the interface determination based on the mapping.
Is this correct, that it will work I mean? I think so but not sure about the wording in the sentence above, and wanted to check before I go destroy my mapping.
Thanks!
Nam

Hi,
If your scenario is simple and straight fwd like from one source to one target then you can split message without BPM. As Priyanka said in the message mapping go to Message Tab and set the target message occurance to unbounded. Then in the Interface Mapping in the target interface section you will find the occurance in the last column, change occurance to unbounded.
While doing configuration you have to go for Enhanced Interface Determination thats it.
Provided you are above sp14, incase of any lowere SP'a you will not even able to activate your mapping program as it will expect ABSTRACT interface to do multimapping.
Thanks,
Prakash
Thanks,
Prakash

I used my iPhone maps it works very well. Is there an application for the iPad that could be used on a boat?

I used my iPhone maps it works very well. Is there an application for the iPad that could be used on a boat?

Indeed :-)
This forum is riddled with questions by users that cannot get their computer to do what they want, *despite* the fact they use a very precise and (usually) unambiguous method of telling it want they want it to do -- a programming language. Making it comprehend *natural* language is, by any way of measuring, a number of degrees more difficult.
That said: in what way would a computer program (advanced or "dumb") be able to help the OP? Spell check is one -- but it's not a *fact* that anything written *badly* equals nonsense. In politics, for example, the most eloquent speakers still manage to make a fool of themselves :D The same goes for "grammar". Of course, bad grammar is more difficult to understand -- EVEN for a human. So a computer is bound to fail on that as well.
Fact checking then? I usually can't even find what I want in one go with Almighty Google (which seems to turn things around: if it cannot find "enough" web pages with the exact phrase you asked it, it automatically assumes you are interested in synonyms, antonyms, homonyms, and other *unrelated* stuff! Yeah THANK you but I want to find what I typed in!)
A good starting point would be to define in more detail what this hypothetical software *ought* to do -- that needs to be a bit more concrete than "I want it to do my job for me."

Hi All ,need ideas on using oracle apex maps...

Hi All,
I need a map on country like trinidad and Tobago and jamaica together how do I accomplish that...using the current oracle apex..
I couldnt find country tobaga and Trinidad listed there
Thanks any guidance shall be appreciated..
Paul j

Hi Paul,
There actually isn't a country map for Jamaica or Trinidad and Tobago in the suite of AnyChart maps that we integrate into Application Express. Your easiest option is to use either the World, Americas or North America map - either of these will allow you to represent Jamaica and Trinidad & Tobago on a map, and associate data with it. I've used the Americas map as an example here: http://apex.oracle.com/pls/apex/f?p=36648:89.
I appreciate that this isn't ideal if you wish to represent these locations on their respective country maps, but it might be a possible workaround for you. Alternatively, you would need to source your own Shapefiles for these countries, and use the AnyChart Flash Map Converter utility - http://anychart.com/products/anymap/converter/ - to convert your Shapefile into a .amap file. That .amap file would then need to be incorporated in your APEX /images directory, and its information would then need to be referenced in your map SQL query in order to associate data with the new maps. For further information on the Converter utility, or indeed on the AnyChart maps, please refer to the AnyChart site: http://anychart.com/products/anymap/docs/.
Regards,
Hilary

How to use scheduling in Mapping?

Hi,
can i use the schedular in Mapping?.
I have created a schedule, but dont know how to use it in Mapping.
Does anyone some ideas oder example.
Thanks
Mandi

Hi Mandi
You configure the mapping and set the 'Referred Calendar' property.
See the viewlet below which does it (for Apps integration rather than database scheduler, but the steps are pretty much the same).
http://www.oracle.com/technology/products/warehouse/htdocs/concmgr/owbconcurrentmanager_viewlet_swf.html
Cheers
David

How do you unpin a drop pin in maps?

How do you unpin a drop pin in maps?

Tap on the pin, then tap on the blue i in the banner. One of the options in there is "Remove Pin".

Parser used in Msg Mapping

Hi all,
We all know that DOM / SAX Parser will be used in Java Mapping.
Then what is the parser used in Message Mapping.
Thanks
Krishna.

Hi,
Graphical Mapping is internally converted into a Java Code that uses SAX Parser.
Regards
Bhavesh

When using two Msg Mapping - will performance decrease?

Hi,
Our scenario is File->XI->MultiIDoc.Can i use two Msg Mapping to create 2 idoc from one flat file rather than doing XSLT or JAVA Mapping.
Will it reduce the performance?

Udo, From what i understand , the background code that gets generated when we do GUI mappings is in Java. So there should not be much of a difference b/w the Java mappings we do and the Java code that is created when doing GUI mappings rite!! Let know of ur thoughts
May be its a call we have to make b/w the Java code we write and the Java code SAP tool writes
-Saravana

Using pins in maps

Similar Messages

Maybe you are looking for