Using Playcenter with E-mu 0

Hi,
I had this working before I had a lot of trouble with my pc and had to re-install windows xp. I was using Playcenter to rip cds into mp3s. Now, Playcenter will no longer work and I get a message that says: "Creative Interface Manager cannot load the resource library CTIntRes.dll. Either not enough memory or it does not exist." Anyway, before my computer went down, it was working just find so obviously it just lost something in the re-install, but how do I get it back? I think it may have something to do with the drivers I still had on my computer from the Soundblaster Li've card I had before installing the E-MU 0404. Maybe now that those are no longer on the dri've, or misplaced somewhere, that's causing it not to work. I'm worried that if I reinstall those drivers though, that it will cause problems with the drivers for the 0404 card.
Any help would be appreciated.
Shane

Ok, its true.
My intention is to confirm if is possible install a Java instance in the same server that ECC is running with Abap instance.
My confusion is because note 1007341, in "deviations" part, says:
ECC 5.0 (ERP 2004 back-end system),
XSS 500 on a separate J2EE 6.40, EP NW04s
with business packages ESS and MSS (SAP ERP 2004).
The SAP system only supports this system landscape
if you have installed XSS 500 on a separate J2EE 6.40.
Then, would I install abap stack, and java stack as separate instances (not add-in!) ? and this landscape is supported acordding this note?
(in the example, A and C are in the same server)
thanks in advance!
regards,
Edited by: Leandro Balboni on Aug 12, 2008 5:28 PM

Similar Messages

HT202667 Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get it transferred over from her Home Sharing account to mine so that I can use it with my PC?

Hi - My daughter was using her Apple TV until recently when she got a Smart TV. Now the Apple TV is not needed so she passed it on to me. How do I get her Home Sharing account transferred over to mine so that I can use it with my PC? Thanks!

As Winston Churchill wrote, however you might want to do a factory reset on the Apple TV.
This way all information pertaining to your daughter will be removed from the device. Specifically if see was sign into any of the streaming service, Netflix, Hulu, etc. her credentials will still be associated with this Apple TV, doing a factory reset will remove all that and make it as if you purchased the device and just plugged it in.
regards

OPEN CURSOR using a WITH clause in the select query

Hi,
I am using Oracle 9i. I have a requirement where I have a REFCURSOR as an OUT parameter for my procedure. I have declared the TYPE and created the procedure.
In the procedure, I am using OPEN <cursor_name> FOR <query>;
Ideally this works in most of the cases that I have tried earlier. However, in the current case I am using a WITH clause in my query to get the results.
I need help in understanding if the above mentioned syntax would not allow me to use the WITH clause in the query.

What error do you get , seems to work ok for me on 10g
SQL> begin
2 open :cv for 'with x as (select * from emp) select * from x';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> print :cv
     EMPNO
ENAME
JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7521
WARD
SALESMAN        7698 22-FEB-81       1250        500         30
      7566
JONES
MANAGER         7839 02-APR-81       2975                    20
     EMPNO

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way?

I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
Thanks,
Sean

The answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
https://discussions.apple.com/community/professional_applications/aperture
However I believe you can have Aperture installed on two machines however only one may be using it at a time.
On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.

How do I use LDAP with iMQ 2.0?

I am looking for an example to see how to use LDAP with iMQ 2.0.
I was able to set up the config settings to access a local LDAP,
but iMQ authentication still rejects valid logins.
Let me know if I can find more info someplace.

You can also find an example I put togther in the Sun One knowledge base.
If you go here:
http://knowledgebase.iplanet.com/NASApp/ikb/index.jsp
Search for article 7772
Alternatively here is the direct link
http://knowledgebase.iplanet.com/ikb/kb/articles/7772.html

How do you use Struts with Jboss Portal

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

I am trying to use strust with jboss portal but I am getting the following error:
An error occured while rendering window 'default.MyPortlet2.myportlet2Window'
org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71 68: List searchresult = (List) request.getAttribute("searchresult"); 69: %> 70: Stacktrace:
I am getting this is in the log file
Caused by: org.apache.jasper.JasperException: Exception in JSP: /WEB-INF/jsp/SearchResultPage.jsp:71
68: List searchresult = (List) request.getAttribute("searchresult");
69: %>
70: <%
71: for (Iterator itr=searchresult.iterator(); itr.hasNext(); )
72: {
73: testPackage.net.dao.hibernate.WorkList workList = (testPackage.net.dao.hibernate.WorkList)itr.next();
74: %>
Stacktrace:
at org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.execute(PortletRequestDispatcherImpl.ja
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.portal.server.servlet.CommandFilter.doFilter(CommandFilter.java:65)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:672)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:574)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:499)
at org.jboss.portal.portlet.impl.jsr168.PortletRequestDispatcherImpl.include(PortletRequestDispatcherImpl.ja
... 238 more
Caused by: java.lang.NullPointerException
at org.apache.jsp.WEB_002dINF.jsp.SearchResultPage_jsp._jspService(SearchResultPage_jsp.java:152)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
... 255 more

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

iPod touch User Guide (For iOS 4.3 Software)

How do I use user_datastore with a feeder proc to add an mdata section?

Hi,
I have text data spread across a number of different tables. I have created a user_datastore with a feeder procedure that creates an xml document which is then indexed into a dummy column on the parent table. This works fine. However I need to add an mdata section to the index, via my xml document. I haven't seen any examples of this being done in conjunction with the ctxsys.auto_section_group option of the create index statement, and am wondering if it is possible?
Could somebody furnish me an example of how I achieve this.
Oracle 11.2.
Thanks
Ralph

You can't use MDATA with AUTO_SECTION_GROUP. AUTO means it automatically assigns zone sections for every tag it finds - if you want anything other than zone sections you must use BASIC_SECTION_GROUP, XML_SECTION_GROUP or HTML_SECTION_GROUP and manually define your sections.

I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there

I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there
It is an Iphone 4

If you go to settings- store - click on the ID and sign out. Then you can put in your apple id.

Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO Corporation

Hello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI

How to trigger New page while using ALV with classes/oops?

Hi All
I am trying to print a report which has to show the data in two pages.
I am using ALV with classes/oops.
Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
Please send some code samples also if available.
Thanks in advance.
Jerry

using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
in case of list you can view that directly.
sort-fieldname = 'FIELDNAME'.
sort-group = '*' "triggers new page
sort-up = 'X'.
append sort to it_sort.

I dropped my macbook pro and the screen is broken can i still use it with an external monitor? Or can I or how do I transfer hard drive files to my mac mini?

I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!

I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
Um, you might consider investing in a backup drive.
And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's.

I am trying to use Words with friends on my iphone 5. How do I get rid of "Connect to itunes to Use Push Notifications

I am trying to use Words with friends on my iphone 5. How do I get rid of "Connect to itunes to Use Push Notifications

Reading some older threads from 2012 and 2011 it appears the problem was present even then. Part of the problem was due to people using multiple or different account id's on the various devices. In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match. This is very frustrating . . . any help out there? Thanks.

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

Using Playcenter with E-mu 0

Similar Messages

Maybe you are looking for