Using Playlist to control sequence for Muvo TX

Just got my Muvo TX FM and dumped my first collection of songs on it using Windows Media Player 0. First thing I noticed is that the play sequence on the Muvo is not at all the same as was in the playlist on WMP 0. Play sequence matters to me. Is there a way to load a playlist onto the Muvo and have it control the sequence of songs played?

Try this software here.

Similar Messages

  • How: Using the same control panel for multiple vi and propogatin​g changes to the control panel.

    I have created a labview project that contains about 40 vi.  Each vi has a control panel in common that is a group of ip address, or port address, and settings that are passed from high level vi to low level vi for the purposes of controlling and accessing our daq cards.  As this control panel exist in all vi's and is required to be identical there is a problem when needing make a change or update the controls during development.  The problem is how much time it takes to go and change every single vi's control panel.  I wish to have a way of propogating a change in the control panel across all vi simultaneously.
    All control in the control panel are in a bundle, so all values are passed in 1 wire. 
    I tried turning the control panel into a sub vi, and this way I can just "create control" and have outputs of the vi maniuplate settings, however if I update the vi, I still have to go back and create a new control for each vi as the control has changed.
    I have tried using the subpanel and creating the control panel in a sub vi that is displayed in the subpanel, but this gives the unwanted consequence of not being able to view or change settings on the control panel if the program is not running, as subpanels blank out when the program is not running.
    Is there another way to dispaly a subvi's front panel beside using a sub panel?  Is there a better way to propogate changes in a bundle throughout a series of vi? 
    JW
    Solved!
    Go to Solution.
    Attachments:
    Labjack Comm Settings.vi ‏15 KB

    Yes a type def would help you out and I'd take the next step to make it a strict type def if you want the appearence to be the same across all of its instances. You can also review this Nugget on Type definitions for more idea on this topic.
    Have fun,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Can i use a diff car kit for muvo^2? 12v( converted to 3.5-

    ... im having a hardtime finding a car kit for my muvo^2

    You can use any car adapter BUT it MUST have the equivalent voltage and the minimum rated current.

  • Using certificates to control restrictions for specific users

    Hey Guys,
    Im new to adobe pro but I find it really easy to use for the most part. I am having a big problem though. Im designing a form for a client. It's basically  a template, so he needs to add input using some forms I embedded in the document. Then he wants to send that form off to his clients and make it unchangeable (so they cannot edit amounts) in the form fields he has typed.
    Is there a way to do this with certificates/any security options within adobe pro?
    PS he doesnt have the pro version himself just the reader. So Id like to put a certificate on his computer so normally the security settings would prevent editing but if the certificate is installed on the computer it overides the general security and allows him to make changes in the form fields.
    Thank you guys

    He really should get Acrobat, especially since you're not allowed to sell Reader-enabled documents to your clients. It's part of the "No Service Bureau" restriction of the Acrobat License Agreement. It will also allow him to flatten the fields and apply security, which would be the best approach. Acrobat Standard will be sufficient for this.

  • Logic Pro - control sequencer tempo externally

    Its a drag, that Logic Pro doesn't offer the option to sync to external Midi clock since version 8 anymore. While thousands of live players are switching to otehr applications: What has Logic Pro 8 or 9 to offer today to work around this problem without extra applications or devices?
    Grateful for any easy and working answer.
    jrp

    jayrope wrote:
    I don't run any audio, just ESX24/ES1 stuff.
    That's audio, any way you slice it. If Logic is hosting sound-generating plugins, it's doing audio.
    On the flip side, if you were using Logic solely as a sequencer for external MIDI gear, and you shut off CoreAudio in Logic, only then would you truly not be doing audio in Logic. Now, wouldn't it have been nice to have a "MIDI only mode" so that Logic could in fact clock to external MIDI clock soley for the purpose of using it as a sequencer for external MIDI devices? Yup. I can only guess as to why they decided not to implement that.
    If the tap works, then external tempo control is also back.
    No. Tap only sets Logic's tempo, but it doesn't clock Logic. After you tap in the requisite number of taps, Logic free-runs at the new tempo under its own internal clock. So no, external tempo control is not back. It's just not there at all.
    Then only midi-controlled start/stop/rewind would be missing to resemble midi clock functionality.
    Even if you could (and you can) get Logic to respond to external tap tempo events (give it 4 up front and let it roll), it's going to re-interpret the tempo each time it gets those four 'taps'. So there's no guarantee that the tempo will be the same each time.
    The only way to get this to work is to figure out how you can send MTC from one of your other devices and synchronize Logic that way. Otherwise (I hate to say it, but it's true) you're SOL.

  • Change control process for updating the UPK topics

    Is anyone using a change control process for updating the UPK topics for JD Edwards EnterpriseOne?
    With publishing the whole module and everything linked, I am finding it difficult if a developer is updating a topic and maybe in the middle of it, but has it checked in to the server?
    I would like to hear what others may be doing to control this.
    Thank you,
    Linda Paar
    MOM Brands

    Hello,
    If you have not already joined the UPK community in My Oracle Support, I would recommend you ask your question in that forum as there is a lot of experience there. Additional information can be found in the announcement at the top of this forum: https://forums.oracle.com/forums/ann.jspa?annID=1175
    Best regards,
    Marc

  • 12c Create Control File for Entire CDB (CDB-root + PDBs)

    Hi,
    In 12c, I understand that there is a single redo log and a single control file for an entire CDB. My question is what datafiles should I use to create control file for the entire CDB. According to Managing Control Files, I suppose I should use all the datafiles (the result of query from CDB-Root: select name from v$datafile), but in practice, the control file creation process can only be successful when I use CDB-Root databfiles. Thanks in advance for any advice.

    The actual error message is duplicate tablespace (system, sysaux), but the root-CDB and PDBs should have separate system and sysaux. The following is the script I used.
    CREATE CONTROLFILE REUSE DATABASE "CDB" RESETLOGS  ARCHIVELOG
        MAXLOGFILES 16
        MAXLOGMEMBERS 3
        MAXDATAFILES 1024
        MAXINSTANCES 8
        MAXLOGHISTORY 292
    LOGFILE
      GROUP 1 '/cdbdata/cdb/redo01.log'  SIZE 50M BLOCKSIZE 512,
      GROUP 2 '/cdbdata/cdb/redo02.log'  SIZE 50M BLOCKSIZE 512,
      GROUP 3 '/cdbdata/cdb/redo03.log'  SIZE 50M BLOCKSIZE 512
    DATAFILE
      '/cdbdata/cdb/system01.dbf',
      '/cdbdata/cdb/sysaux01.dbf',
      '/cdbdata/cdb/undotbs01.dbf',
      '/cdbdata/cdb/pdbseed/system01.dbf',
      '/cdbdata/cdb/users01.dbf',
      '/cdbdata/cdb/pdbseed/sysaux01.dbf',
      '/cdbdata/cdb/pdb1/system01.dbf',
      '/cdbdata/cdb/pdb1/sysaux01.dbf',
      '/cdbdata/cdb/pdb1/pdb1_users01.dbf'
    CHARACTER SET WE8MSWIN1252

  • How to control time sequence for handshaking

    Hi all,
      I am reading some material about using VISA to control the data input/output to external device (in serial or parallel port). For some device, it needs a precise time sequence for handshaking to 30 nanosecond, I wonder if it is possible to control from OS level to make such short time interval? I am using Labview 2011 and Windows7 32 bits

    Greetings phlins
    In general, software time operations in Windows won't go beyond 1ms. Even if you use an RT OS, accuracy won't go further than micro seconds. Only FPGA or hardware timed tasks can handle nanoseconds. This is regarding digital operations in general.
    You may want to check this document:
    http://digital.ni.com/public.nsf/allkb/D37754FFA24F7C3F86256706005B9BE7
    It talks about the supported baud rates for NI-VISA. With this, just make the conversión to the actual time each baud rate handles and compare it to your requirements.
    Finally, when you said this handshaking is for a device, have you considered searching for a device driver? There are many device drivers available for LabVIEW, if i may ask, wich external device are we talking about?  
    Luis J.
    Applications Engineer
    National Instruments

  • How to use the same variable value for data entry and the planning sequence

    Hi,
    the scenario is the following:
    Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
    Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
    What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

    You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
    Ravi Thothadri

  • How to use Source Code Control for Large Application?

    Hi, All!
    I would like to collect knowledge about "best practice" examples for using Source Code Control and project organization for relative large application (let's say approx 1000 SubVIs).
    Tools used:
    LabVIEW 8.0
    CVS Server
    PushOK CVS Proxy Client
    WinCVS
    With LabVIEW 8 we can organize large project pretty well. This described in article Managing Large Applications with the LabVIEW Project.
    I have read this article too: Using Source Control Software with LabVIEW In this Article Source Safe used, but with PushOK all looks nearby the same and works (some tricks for compare function are required).
    Example. Two developers working together on same project. Internally project is modular, so one developer will work with module "Analysis", and another one with "Configuration" without interferences. These modules placed into Subfolders as shown in example above.
    Scenario 1:
    Developer A started with modification of module "Analysis". Some files checked out. He would like to add some SubVIs here. So, he must also perform check out for the project file (*.lvproj), otherwise he cannot add anything into project structure.
    Developer B at the same time would like to add some new functions into module "Configuration". He also needed to check out project file, but this file already checked out by Developer A (and locked). So, he must wait until lvproj file will be checked in. Another way is mark *.lvproj files as text files in PushOK, but then one of developers will get conflict message by checking in and then merging will be necessary. This situation will coming very often, because in most cases *.lvproj file will be checked out all the time.
    Question: Which practice is better for such situation? Is Libraries better than folder for large project?
    Scenario 2:
    Developer C joined to the team. First, he must get complete project code for starting (or may be at least code of one Library, which assigned to him).
    Question: How it can be done within LabVIEW IDE? Or WinCVS (or other SCC UI) should be used for initial checkout?
    Scenario 3:
    Developer D is responcible for Build. Developers A,B,C have added lot of files into modules "Analysis", Configuration" and "FileIO". For building he need to get complete code. If our project splitted into folders, he should get latest *.lvproj first, then newly added SubVIs will appear in Project Explorer, then he should expand tree, select all SubVIs and get latest versions for all. If Project organized in Libraries, he must do the same for each library, isn't?.
    Question: Is this "normal way", or WinCVS should be used for this way? In WinCVS its possible with two mouseclicks, but I prefer to get all code from CVS within LabVIEW IDE recursively...
    That was a long post... So, if you already working with LabVIEW 8 with SCC used for large project, please post your knowledge here about project structure (Folders or Libraries) and best practices, its may be helpful and useful for all of us. Any examples/use cases/links etc are appreciated.
    Thank you,
    Andrey

    Regarding your scenarios:
    1. Using your example, let's say both developers checked out version 3
    of the project file. Assuming that there are only files under the
    directories in the example project, when Developer A checks in his
    version of the project, there will be new files in one section of the
    project separate from where Developer B is working. Developer B,
    notices that there is now a version 4 of the project. He needs to
    resolve the changes so will need to merge his changes to the latest
    version of project file. Since the project file is a text file, that is
    easy to do. Where an issue arrises is that after Developer B checks in
    his merged changes, there is a revision 5. When Developer A and B go to
    make another change, they get the latest version which will have the
    merged changes to the project file but not the referenced files from
    both Developer A and B. So when A opens version 5, he sees that he is
    missing the files that B checked in and visa versa. Here is where the
    developers will needs to manually use the source control client and,
    external to LabVIEW, get those new files.
    Where libraries help with the above scenario is that the library is a
    separate file from the project so changes made to it outside of the
    project do not require the project to be modified. So this time, the
    developers are using a single project again which time time references
    two libraries. The developers check out the libraries, make changes to
    the libraries, and then check those changes in. So when each developer
    opens the project file, since it references the project file, the
    changes to the library will be reflected. There is still the issue of
    the new files not automatically coming down when the latest version of
    the library is obtained. Again, the developers will needs to manually
    use the source control client and, external to LabVIEW, get those new
    files. In general, you should take advantage of the the modularity that
    libraries provide.
    2. As noted in the above scenario, there is no intrinsic mechanism to
    get all files referenced by a LabVIEW project. Files that are missing
    will be noted. The developer will then have to use the source control
    provider's IDE to get the initial contents of the project  (or library).
    3. See above scenarios.
    George M
    National Instruments

  • Can't share photos using shared Photo Stream with iCloud Control Panel for Windows

    BACKSTORY: My friend took pictures of my family. I want to see the pictures he took. We live about 2.5 hours apart by car. Gas prices are too high for me to just drive down with an external hard drive to get the pictures and I might as well throw my money out the window if I were to ship him a hard drive and he ship it back. SO. I ask him if he would share photos with me and he quickly agreed. He added me to a Photo Stream  he has. ok cool. I recieve the invitation email just fine but this is the error I get when I click on the link:
    ERROR MESSAGE:
    Photo Stream
    Follow these steps to join a shared photo stream
    1.Make sure you have an iPhone, iPad or iPod touch running iOS 6 or a Mac running OS X 10.8.2 withiPhoto 9.4 or Aperture 3.4 or later installed.
    2. Sign in to iCloud on your devices.
    3. Open the invitation email on an updated device and tap the Join this Photo Stream button. 
    WHAT I NEED:
    How can I view shared photo streams using iCloud Windows control panel 2.1.2.0? How can I work around this error message? I don't own any of these products that apple wants me to own in order to view these photos! I don't have the cash to go out and purchase them. What can I do to get "my" photos? Do I have to be signed into my friends apple id to see the shared photos?
    What I've tried:
    I already have the icloud control panel installed and updated to the latest version.
    I'm signed into iCloud on the control panel. (no apple id password issues)
    I have photo stream checked.
    I have my photo stream checked
    I have shared photo stream checked.
    I have tried copying and pasting the link into the address bars of Safari for Windows, Google Chrome, Internet Explorer,  and Firefox respectively and pressing enter to load. all present the same error message.
    I visited iCloud.com to see if there was anywhere to access the shared photo stream there... No option exisits
    Checked my photo stream folder in windows explorer. it's completely empty. I haven't put any of my own photos there so nothings missing per se... I just can't see my friends shared photos.
    MY SET UP:
    Windows 7 64bit Home Premium
    4gb of RAM
    iCloud control panel version 2.1.2.0
    I don't own any version of Outlook, (if that matters. I doubt that it matters at all in this case.)
    I don't have any iOS Devices or a mac capable of 10.8. My MacBook is stuck at 10.6.8. It's a late mid 2008 just before the aluminum unibody computers came out. If I had only waited another month... sigh. Murphy's Law is alive and well.
    any sugestions, especially correct answers, are welcome. please help me figure this out. Thanks in advance.
    Desert_dweller5

    Hello desert_dweller5,
    It sounds like you art trying to access a Shared Photo Stream, but you do not have one of the devices to enable your Apple ID as an iCloud account.  The following article provides information on how Shared Photo Streams work:
    iCloud: Photo Stream FAQ
    http://support.apple.com/kb/HT4486
    The article states that for privately Shared Photo Streams to work, the recipient will not only have to have an Apple ID, but it will have to be an iCloud account:
    Friends and family with iCloud accounts can view your photos in the Photos app on any device using iOS 6 or later; on a Mac in iPhoto 9.4 or Aperture 3.4 or later; on a Windows PC with Windows Vista or later and iCloud Control Panel 2.0 or later installed; or on a second generation or later Apple TV with software version 5.1 or later installed. They can also view your photos on the web if you enable Public Website in the settings or options for your Shared Photo Stream.
    Since you do not have an iCloud account and just and Apple ID, your friend can share the photo stream as a public website so that you can view it, as stated in the same article: 
    Can I share with people who don't have an iCloud account?
    Yes. If you enable Public Website in the settings or options for your shared photo stream your photos will be published to a website that anyone can view in an up-to-date web browser.
    To be able to change an Apple ID to an iCloud account, you would need an iPhone, iPad, or iPod touch with iOS 5 or later or a Mac with OS X Lion v10.7.4 or later as stated in the following article:
    Creating an iCloud account: Frequently Asked Questions
    http://support.apple.com/kb/HT4436
    Best,
    Sheila M.

  • I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

    ''I figured it was going to be FAFSA causing your problem.''
    Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I would like to use my deactiveted iPhone 3G for apps and music.  How do I add music?  When I synch with iTunes it won't add the selected playlists.

    I would like to use my deactiveted iPhone 3G for apps and music.  How do I add music?  When I synch with iTunes it won't add the selected playlists.

    See if this link offers any insight,
    Use iPhone as an iPod
    http://support.apple.com/kb/HT3406

  • What is the best practice for using the Calendar control with the Dispatcher?

    It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security.  However, the Calendar relies on this endpoint to build the events for the calendar.  On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works.  We've noticed the same behavior on the Geometrixx site.
    What is the best practice for using the Calendar control with Dispatcher?
    Thanks in advance.
    Scott

    Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
    Example: http://www.cariboowoodshop.com/wood-shop.html

  • Use the same code module for several steps in the sequence

    Hello All,
      I have been trying to set up a sequence that uses the same code module for all of the steps in the sequence, but am having trouble referring back to it when I need to send it commands.  I have gotten as far as calling the VI in a new thread so that it can be run asynchronously.  I can run the simple sequence and it will indeed open the VI, and move on to the next step.  When I close the VI manually from the front panel, the sequence in TestStand completes, as expected.  So it appears that I have that much working. 
      My question is how to call the separate thread from the main sequence or other sub sequences when I need to edit the parameters.  If I insert an Action step, I am required to select a VI file, but from what I can tell, it opens a different instance of the file, and does not provide an interface with the other instance running asycronously.  My next guess was to use a Statement step, but I was not able to figure out how to configure the lookup string to call the VI parameters.  Beyond that, I'm not sure how to proceed.  Please advise.   
      My intention is to start the code module VI (asynchronously), run several different subsequences within the main sequence that call that same VI and edit it's parameters, close everything and report on the results.  If I am misunderstanding how TestStand is supposed to work, please let me know. 
    Thanks,
    GSinMN    
    Solved!
    Go to Solution.

    What I do is use a Queue to send data to the asynchronous VI.  So it can run and do whatever, but also recieve the commands from the queue.  I use an Action Engine that holds the queue reference and sends the commands.  So you really just have to call the Action Engine from your sequences.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for