Using Postcard Template, how do I print with NO white border?

I am trying to use the 4 postcard template and cannot get the photo printed without a white border around the edge of the paper. I want to the photo to take up the entire card. What am I doing wrong? Obviously I am new to this so I would appreciate very simple instructions.

To test how close to the edge your printer prints, just make up a page in Pages with an all over grey box and print that.
Then adjust your postcard template to suit.
You have not said whether you are printing to A4 or US Letter.
http://www.office.xerox.com/multifunction-printer/color-multifunction/phaser-856 0mfp/spec-enus.html
suggests you can print to larger paper stock and possibly trim it back.
Peter

Similar Messages

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • How Do i print with a dell

    i have a Dell Photo AIO Printer 922 and their are no drivers for it. How do i print with it?????

    i have a Dell Photo AIO Printer 922 and their are no drivers for it. How do i print with it?????
    I think that's a printer from 2004 for PC's only. You might be able to use it by running Win XP on your Mac.

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • How can I print with a wider left margin in Preview? (OSX 10.5)

    How can I print with a wider left margin in Preview? (OSX 10.5)
    To punch Binder Holes.
    Should be easy ... Make a Custom page with a wider left margin ... easy to set up, but it does not actually work for any printer I am connected to.
    Info so far:
    Found an older post from 2002 ... "Make a custom page"
    Mac Help has a limited, simple, incomplete answer: "Make a custom page"
    Tried three printers. One Postscript Level 3 One Level 2 and one non postscript
    Switching between page types in the drop down shows a change in the print preview, and the floating information shows the correct page size and larger left margin... but the "Custom Page Size" does not show a larger left margin, in the preview, no mater how it is set.
    There also appear to be a relation ship between the radio Buttons for scale and the margin settings.
    Test prints have simply cut off the left side of the document, and scaled the document from the right side in and the top down.
    Printing a PDF from Preview
    MacBook Pro
    OSX 10.5.6
    Thanks
    Peter

    Thanks ... tried the Paper Handling, but no lock.
    Based on the fact that any scaling, "moves" the image down and to the left on the paper ...
    Th only "work around" solution is to ...
    Rotate the PDF page 180, then scale slightly (90% or so ...)
    This pushes the upside down page, down and to the left.
    While this is the opposite of what is desired, the print is then correct when
    it is punched and placed into a three ring binder.
    Assumption is the application that creates the documnt, needs to have the paper margins set. The reality is, an application like Preview, that does not "create anything", needs to handle existing documents PDF, JPEG and print to Custom Page configurations.
    ie: In Preview, Custom Page does not work correctly,
    Thanks allfor the comments and help ...

  • Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

    Hey Guys!
    I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
    The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
    Can you help me? Please?!
    Thanks Folks!

    This must be a tough one, no suggestions at all.

  • Missing classe to implement How to Web Printing with MS Excel

    Hi there,
    we're trying to implement the How to paper "Web Printing with MS Excel". This paper comes with transport files to import the needed packages and classes.
    Now when I try to import that thing, the transport hangs. Checking the protocol shows that for each class there is the information: "Object ... was not included in this step."  Analysis shows that the Z-classes seem to inherit from the standard classes
    CL_RSR_WWW_GRID
    CL_RSR_WWW_HELP_WINDOW
    CL_RSR_WWW_ITEM_CONDITION
    CL_RSR_WWW_ITEM_EXCEPTION
    CL_RSR_WWW_ITEM_GRID
    CL_RSR_WWW_ITEM_TEMPLATE
    CL_RSR_WWW_ITEM_TEXT_ELEMENTS
    CL_RSR_WWW_TABLE
    These classes are in my Sneakpreview 04 but NOT in our BW System 3.5. Here the system infos:
    SAP_ABA     640     0015     SAPKA64015     Anwendungsübergreifende Komponente     Appl. Interface SP
    SAP_BASIS     640     0015     SAPKB64015     SAP Basiskomponente     Basis Support Pack.
    PI_BASIS     2005_1_640     0005     SAPKIPYJ65     Basis Plug-In (PI_BASIS) 2005_1_640     Kompon. Supp. Pack.
    SAP_BW     350     0015     SAPKW35015     Business Information Warehouse     Kompon. Supp. Pack.
    As the missing classes seem to be the problem, do I really have to get them out of my MiniSAP?
    Help appreciated
    Thanks
    Gerald
    ps. the transport file can easily be imported into the SneakPreview MiniSAP 6.40
    Message was edited by: Gerald Ressmann

    Hi,
    Here is the How to Web Printing with Excel, download from the Link
    This will expire in 7 days from the posting Date.<a href="http://download.yousendit.com/143673776AFD7E8F">How to Web Printing with Excel</a>
    Cheers.
    Ranga

  • "How to Web Printing with Microsoft Excel" needed!

    Hi all,
    I desperately need the SAP Howto document "How to Web Printing with Microsoft Excel" for BW 3.5. The document is listed in the Howto section of SDN, but the link is wrong or outdated - I cannot download this document. Could anyone of you provide me with this howto? Please upload it somewhere (could be interesting for other people as well) or send it to me by email ([email protected]). Points will be assigned
    Thanks a lot in advance,
    James

    Hi,
    Here is the How to Web Printing with Excel, download from the Link
    This will expire in 7 days from the posting Date.<a href="http://download.yousendit.com/143673776AFD7E8F">How to Web Printing with Excel</a>
    Cheers.
    Ranga

  • Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even previe

    Trying to print 4x6 photos.  How can I print with no borders on LR5 with my HP OfficeJet 7410?  Even when in Print mode in LR5, my photos show a border.  Page Setup shows "borderless".  Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

    JimHess~  Many thanks.  In my short history with LR, it's amazing how many people I've seen ask this question.  I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question.  You made my week.  And my friend's photo album...

  • How can I print in black/white only a document that has colors in the original?

    How can I print in black/white only a document that has colors in its original. I don't need the print out to be in color, and I don't want to waste the color ink.

    It depends on your printer and the application you are using.
    In some applications you can choose color vs. greyscale/black&white when you do File > Print.   PowerPoint is one example of an application that allows this choice.
    Otherwise, you can usually select greyscale at the time you print the document.  Do File > Print. In the resulting dialog box, there should be an item called Copies & Pages (in Word and other applications) or Preview (in Preview).  Click it.  In the resulting list, you should then see an option called Printer Features.  Click it.  Then you should see an option called Printout Mode.  Usually one of the modes is Greyscale or Black & White.  Select it.  Then Print.
    This can also depend on your printer.  Exactly what make/model printer are you using?   And what kind of document are you trying to print (Word, PPT, JPEG, etc)?

  • Printer giving uneven white border ...

    Hi Guys
    Technically not an Indesign question (although the PDF I am using originated from Indesign), but I am out of ideas!
    Our in house printing services doesn't have the capability to trim down on large quantity jobs, so I am having to design the A5 flyer we require with a white border.  I am designing 4 to an A3 sheet.
    I have allowed a 5mm white border around the edge and a 10mm border in the middle so when trimmed into 4, in theory, each should have a nice 5mm white border all the way around.
    The pdf looks great in terms of the borders being spot on.
    When printed however, we get an uneven white border (the right hand long border is a good few mil narrower than the left and the top one narrower than the bottom).
    We have tried on several printers and the same results.
    The document is double sided and its just occured to me as typing that I havent tried to print just one side.
    Trying that now but any other suggestions?  Its obviously the printer issue if the PDF is fine right?
    Thanks!

    It's a difference with technology. Printing presses have grippers, and registration tables to assure the sheet is properly positioned before it is fed into the rollers. Most digital printers simply have some sort of pick-up roller and a paper sensor that stops the machine if there is an odd length detected, and this is VERY imprecise, especially if the paper guides are not snug or, as is often the case, sheets trimmed to digital sizes are slightly short or slightly long which can happen with changes in humidity as well as just poor cutting . You can check with the manufacturer, but it's a near certainlty that they will tell you that +/- 1mm is well within spec for position on the page.
    I'm afraid this is just a fact of life. And it wouldn't matter if you were trimming, either. Sheet-to-sheet variation of up to 3 mm overall is not uncommon on desktop printers, and even on commercial copiers, so putting a stack in a guillotine is not a guarantee that all of the imaged areas are aligned.

  • Using brochure template, the second side prints upside down.  How to fix?

    When using the brochure template how does one correct the back page from printing upside down?

    Hi,
    From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
    Within the Layout tab change the Print on both sides option.
    For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4356 Why are Kodak printers not on this list and how can I print with my Kodak printer

    Why can I not able to print with a Kodak printer

    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

Maybe you are looking for