Using Powermac G5 as a Base Station w/Airport Extreme Card...

Hello. Can anyone tell me if I am able to install an Airport Extreme card into my Powermac G5 and use it as a virtual base station to share the internet and network with my Powerbook (which has an Airport card)?
I have DSL going to my G5 via ethernet, and would like to share it wirelessly with my Powerbook. The cheapest way, if it works, would be to purchase an Airport Extreme card and install it into my G5. Any info is appreciated. Thanks!

Yes it's possible:
http://docs.info.apple.com/article.html?artnum=107484
The down side is that the G5 has to be on for it to work and the setting doesn't stick between restarts or sleeping.

Similar Messages

Is Duel Ethernet Airport Base compatible with Airport Extreme Card?

I am about to upgrade to the new Macbook Pro 15" from my Titanium G4. I currenty have the original Airport card and the dual ethernet Airport Station.
Question - will the new Pro with the Airport Extreme card be compatible with the old base station?
If it will, what would be the advantages of upgrading to a new Extreme Basestation?
maginme
Macbook Pro 15" 2.16 Mac OS X (10.4.7) Powerbook G-4 Titanium

magicnme, Welcome to the discussion area!
Question - will the new Pro with the Airport Extreme card be compatible with the old base station?
Yes, the MacBook Pro can connect to a 802.11b base station like the Dual Ethernet (aka snow) AirPort base station (ABS).
If it will, what would be the advantages of upgrading to a new Extreme Basestation?
The AirPort Extreme base station (AEBS) offers a USB printer port for wireless printing.
The AEBS offers WPA and WPA2 wireless encryption.
Also if you have other computers on your local network, large file transfers between your computers will be faster.

Using Dlink 524 as base station and airport extreme as remote?

hello,
is it possible to use a dlink 524 as a WDS base station, and set up my airport extreme as a remote station?
I have tried to use the airport setup utility however I dont seem able to connect to the internet. I have also tried to set up the Dlink, however there doesnt appear to be any referenced to WDS. Sorry, I know nothing about networks.

No the D-Link is not compatible with Apple's WDS.

Remotely Access Base Station through Airport Extreme

Someone may have already asked this but i couldn't find it. I have a 500 Gb hard drive connected to my Airport Extreme set up as a base station which all the computers on the network are able to access with password. Is there anyway to connect to the base station when im not at home. I know a little about VPN but not sure if thats the best thing to do or even how to set it up here.
Any adivce is awesome.

1. Enable remote access to your base station's hard drive via its WAN port. See:
http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap2051.html
2. When you are remote location (you cannot test this from a computer on your own LAN) go to the Finder, and from the Go menu select "Connect to Server...". You will need to enter the public IP address of your Base Station.
Notes:
1. This access is not going to be a secure connection like that provided by a VPN (because it is not supported by the base station)
2. Make sure your base station's disk password is a good one, because anyone on the internet that can guess it will also be able to access the data on the drive.

Does Airport Express work with Airport Base Station (not Airport Extreme)?

I'm needing to extend the range of my Airport base station. I purchased an Airport Extreme to funcion as a repeater, but it's not working. Will Airport Express work with a (white) Airport base station. If not, how can I extend the range besides moving the base station?

Can someone actually tell me how to set-up the Airport Express (with my Airport) so that it will act like a repeater. Once again, this is an Airport and not an Airport Extreme.

Airport Extreme base station and Airport Express

I have both the above but have real trouble getting them to both join the same network. I want to use the base station to hook up to he internet and the Airport Express to drive my stereo in another room Both work fine on their own and on separate networks, but I have to switch from one network to the other if I want to browse or listen to music. Very frustrating. I feel sure I should be able to have both airports on the same network but I just can't get it configured. I am a newbie with WIFI so any help gratefully accepted.

The main base station, the AirPort Extreme, needs to be set up to "Create a wireless network". The AirPort Express needs to be set up to "Join a wireless network", which will be network created by the AirPort Extreme.
Is this how you have them configured now?

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Airport Base station or Airport express to use wirelessly for dial up ?

I have an Ibook G4 1.33 with a Airport extreme card.
I currently have it set it up to the wireless modem that my phone company provided for me for my DSL service.
Unfortunately I am moving to an area that does not have DSL service. I would like to know if I can set up my Ibook to use it wirelessly and have it connected to an Airport base station or Airport express in order to have my dial up service to work wirelessly???? So Airport base station or Aiport Express?? Many Thanks in advance- Geof
IBook G4 1.33 12 1.5GB, Vintage Imac , Ipod with video, Ipod Nano Mac OS X (10.4.3)

The only base station with dial-up capability (in addition to traditional ethernet equipped modem capability) is the AirPort Extreme Base Station w/modem. Check the Apple Store to look over the details, and make sure you are looking at the AEBS with the modem (there is also a version without a dial-up modem which will not work in your application).

Using a wire connected mac as wireless base-station by using airport extreme card

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?
If not, is there another way?

ok, i got the answer from another discussion. http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

HT4262 This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.

In my Airport Utility a read the following message:
This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support." What do I have to do ?? I can use my airport.

I assume that your MacBook Pro is running OS X Mountain Lion ... correct? If so, version 5.6 can run just fine on this version of OS X; it just can't be installed in the traditional way.
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

Can i upgrade my base station with airport in mountain 10.8.5

can i upgrade my base station with airport in mountain 10.8.5

can i upgrade my base station with airport in mountain 10.8.5
Please check on the side or bottom of the AirPort Express to locate the model number. It will start with an "A" followed by four numbers.
If you have A1084 or A1088, you will not be able to administer these older versions using the iMac running OS X (10.8.5).
If you have model number A1264 or A1392, you can check to see if there are any available updates as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express icon
Click on the Version number that appears in the small window
You will be notified if an update exists for your AirPort Express

How do I find a forgotten airport express base station in Airport utility.

I tried to add my airport express to my home network. I inadvertently clicked on "forget this base station" in airport utility. I cannot seem to get it back in airport utility. How do I find it again?

Hi,
This reply is for anyone who got this far but couldn't get further, becuase their setup was similiar and the above didn't work.
I have an Airport Extreme which I wanted to extend with a new Airport Express (2G). I first connected with a network lead and then decided I wanted to extend wirelessly so I could use the lead for my Samsung Smart TV - for Netflix. I clicked "forget" and then couldn't see the Airport Express to reconfigure it to extend my network wirelessly. Resetting the Airport Express is fine but it still doesn't appear in AirPort Utility.
You must switch ON Wi-Fi in System Prefs, Network. I didn't have it switched on because my Mac Mini is connected to the Airport Extreme with a network cable. The newly reset to Factory settings Airport is now available in AirPort Utility to select under the "Other AirPort Base Stations" button. Be careful of the default setting during setup. You do not want to use the AirPort Express instead of the AirPort Extreme (which sets the Extreme back to Default settings)
Connecting a New AirPort Express to a wired AirPort Extreme by first switching on Wi-Fi (which I wasn't using) was not intuitive. Remember to switch ON the Wi-Fi then switch it OFF after setup if you don't need it. And honestly one less thing in my living room broadcasting radio waves everywhere has got to be a good thing.

Setting up airport extreme card and airport extreme base station

I have an ibook G4 about 3 years old with osx10.4.10 recently installed. I have recently bought an airport extreme card and have also bought an airport extreme base station.
There seems to be a problem with the set up of the card. It does not seem to find any wireless networks at all, including the base station. The base station seems to be working as I went through setting this up with Apple phone support and we managed to do it by connecting the laptop to the base station with an ethernet cable.
I think the problem is with the card. I think I need to reinstall and set up the card again from scratch, but can't figure out how to do this -aiport utility and airport setup assistant don't seem to help here as they take you straight to the stage of setting up a base station. I seem to remember when I originally installed the card for the very first time (before attempting to set up the base station) that it did find other wireless networks, so I don't think there is a physical problem with the card.
Any suggestions on getting the card working appreciated.
Many thanks

Hello bblairlondon. Welcome to the Apple Discussions!
First, verify if OS X "recognizes" the card, by using the System Profiler utility. Select the AirPort Card option under Network in the column on the left. The "Wireless Card Type" should be "AirPort Extreme (nxnnnn, nxnnnn)."
If no card appears, I suggest that you double-check your AirPort Extreme Card installation by using the following Apple Tech article: iBook G4: CIP Instructions
If the card does appear, then try the following ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

Airport Admin scan doesn't pick up base station or Airport Express

I have two airport networks (802.11n)in separate buildings. Each has an Airport Extreme Base station, an Airport Express, and a PC connected to the base station via ethernet cable. Both PCs are able to access the internet through ethernet connections to the base station.
In one network, Airport Admin run from the PC recognizes the base station and the express and allows the settings to be changed. In the other network, Airport Admin run from the PC scans and doesn't find anything. Running Airport Admin from a MacBook Pro finds everything and allows any setting to be modified.
I'm trying to stream AirTunes from the PC through the Airport Extreme and can't do so because Airport Admin can't find the network. AirTunes works flawlessly from the MacBook.
Any suggestions would be greatly appreciated.
Luther

You may want to check the posts in the AirPort Extreme (802.11n) discussion area to see if a solution has been posted.

Using Powermac G5 as a Base Station w/Airport Extreme Card...

Similar Messages

Maybe you are looking for