Using Powermac G5 for Video playback on TV, Best options?

Have a Powermac G5 Dual 2Ghz '03 with 8gb Ram and an ATI 9600 Pro 256MB dual DVI wanted to playback my files of .mpeg and ,avi movies on my TV used an Apple DVI to S-video cable and did not work. I am using an HP 24" LCD Monitor running at 1900X1200 and playback is on my 32" Tube Sony Trinitron TV would like to use S-video, but also was thinking of buying an Apple TV but really need to save money. Was also thinking of buying a second PCI ATI Video card to run s-video if this is even possible? Any advise would be greatly appreciated...
Jim
Message was edited by: Jim J. Farrell, IV

Hello, what I recommend is save money and buy a new LCD tv I seen really good deals at Walmart 37" 720p for $398, most new tv's comes with a PC input, the video quality is great. After you buy your tv go to this website: monoprice.com and get the cables that you need for a really good price.
hope this help.

Similar Messages

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

Anyone using a mini for video playback ?

has anyone had any luck running DV from the mac mini ?
I know Gallery has a virtual VTR,
Thank,
Paul

A strange thing happened. When using Snow Leopard, I opened the desktop folder for the Leopard volume in icon view and moved some of the icons around.
Then when I rebooted into Leopard the display problem didn't happen (although there was still some weirdness with the blue screen being chopped up during bootup). I found all the icons on my Leopard desktop were de-arranged. I started manually rearranging them and then did "Clean Up Selection" on some, and the display problem suddenly occurred.
So this is looking like it might be something to do with the DS_Store file. My theory:
1. Snow Leopard does something to the video ROM that either:
— A. requires some new DS_Store format, or
— B. is just buggy with certain complex DS_Store data (note that I have ~100 icons on the Leopard desktop, carefully arranged and colored)
2. When I rearranged the icons in Snow Leopard, this either:
— A. wrote a Snow Leopard-style DS_Store file for the Leopard desktop, or
— B. just wrote a simpler DS_Store file that didn't have the problem complex data
3. Then back in Leopard when I fiddled with the icons, this wrote a new DS_Store file (either older Leopard format, or just more complex)
4. The video card was still in "Snow Leopard mode" at this point as I hadn't rebooted Leopard a second time, so the desktop display went distorted as soon as the new DS_Store file went into effect.
5. For some reason Leopard will write over the bad/new settings Snow Leopard writes to the video ROM, but only on the second restart.

PPro engine for video playback question

Joe mentioned in another thread that Encore 2.0 uses "PPro engine ... for video playback, instead of DirectShow". Does this imply that Encore DVD requires a CPU with the SSE2 instruction set like PPro does? Thanks.

Yes.

Volume control for video playback through Apple TV2

I am trying to configure the volume settings used on airplay through apple TV2 and a macbook pro and Iphone4 all with most recent updates.
I am using the apple remote app on my iphone to control the apple tv.
Whats working:
Using the pandora app on my iphone through aiplay to the apple tv, I can control the volume using the plus and minus buttons on the side of the iphone for volume control. Very cool and easy.
Using the apple remote app on my iphone I can control the itunes volume of different speakers by clicking on the airplay icon and using a slider. Not as cool as using the hard +/- buttons but still works.
Whats not working:
Controling volume on appleTV2 through the iphone remote app for video playbacks like netflix, and youtube.
Why I want this: RIght now I can control most of the multimedia right from my iphone including cranking the music up:) But when I switch over to video(Netlfix, Youtube) I have to get out another remote (stereo reciever) to control the volume. It seems we are so close to being able to control everything off the iphone, the only thing missing is volume control for video playback.
Is there a setting that can be changed or a solution I havent found?
Thanks

Same problem with TV3. HDMI volume output is not adjustable, neither with the original Apple remote nor with any universal. Why ? Every simple settop-box is able to be volume adjusted. And a Mac Mini too ?!!!
I use a flatscreen TV. it has 3 HDMI inputs and one optical out for the audio going to an amp standing behind it. The sound of the TV is switched to go to the optical out.
HDMI 1 is connected to the satellite settop box with its own remote control ( channel +/-, volume +/- etc. ) it work s fine.
HDMI 2 is connected to the MacMini HDMI out with its own remote control ( channel/music +/-, volume +/- ) it works fine too.
HDMI 3 was connected to Apple TV3 with its own remote control ( channel/music +/- but no volume ). I sent the TV3 back to Apple.
What's going wrong in the mind of Apple ? Why is the HDMI volume output of the MacMini adjustable with the Apple remote, and the TV3 not ?
I want not to discuss, wether a 4th remote control is useful or not. I don't want it. I want to adjust the volume with the originl remote control of the specific unit I use, because I need it anyway. It worked since years, but not with Apple TV3.
How can we help Apple to open the volume +/- function on their own remote control ?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?

Does iTunes have any hidden picture controls for video playback (e.g. contrast, brightness) ?
I haven’t been able to find any.
Since the .m4v file type appears to prevent any video bought or rented from the iTunes Store from being played using any other program the lack of these picture controls - if indeed they are lacking - make it seriously deficient as a video player.

Thanks for the rapid response to my enquiry.
I know that it’s possible to adjust the monitor’s performance via System Preferences but it is rather long-winded and I’d rather not alter the settings for the entire screen (and then have to change them all back once finished) when it’s only the video playback window that needs adjustment.
Since iTunes provides various options using the Equalizer for adjusting sound playback it seems rather odd that they don’t have a similar panel for video.
Regarding QuickTime.
Apparently earlier versions (such as 7) had picture controls but the current version (10.4) does not.
I assume Apple are phasing out QT whose development seems to have stopped - or rather gone backwards since it now lacks capabilities it once had - and intend in future to treat iTunes as their universal media player which no doubt makes sense from their point of view.
I wasn’t aware of the .m4v file type when I made my first and probably last video purchase via iTunes yesterday and didn’t realise that it would restrict my options for playback so completely.
The experience has really put me off buying any additional video from the iTunes Store.
Back to DVDs.

Is it possible to use iCloud storage for videos

Is it possible to use iCloud storage for videos. I ran out of 16 gig storage on my iPad.

You can try cloud storage like Sugarsync, Dropbox or Box.com
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/b8e055e5cd15e01d23d aa6d55f1bea4b.jpg

Connecting the canon SX50 to HDTV for video playback???

Connecting the canon SX50 to HDTV for video playback???
ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
(#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
Is there an easy way to accomplish this?
The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
I'm not quite sure I'm recording in full HD...The payback is only 60i

Thanks grazie!
Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
I was also able to control the SX50 TV Display with my samsung remote, kool.
As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway) if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any. Thanks, or grazie grazie!

I am planning to buy mac mini 2.5Gzh. I will be using it mainly for video editing and I am planning to upgrade up to 8GB. Is it a good buy or should I try some other alternative.

I am planning to buy my next desktop. I will be using this mainly for video editing. I am not a professional video editor, I normally do home made videos for youtube, like tutorial, DIY project etc. I use Nikon D3100 camera and some basic green screen techniques as part of recording. So my basic video editing would be just syncing audio, editing videos to cut un-necessary frames etc and some basic effects. I am also planning to buy final cut pro.
So my question is should I buy the mac mini or Imac?

Great advice from RRFS!
For video editing, do go for 16 GB of RAM ffrom OWC & consider the twice as fast i7 2.6 model, see Geekbench scores here..
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play on my ipad. Is there a way I can get them to play?

I use my camera for video and photos. When I download my videos to my ipad1 using the camera connection kit, they will not play.
Does anyone know how I can make this work?

Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred

I'm downloading using RealPlayer But the video playback is jerky. The audio playback is OK.   Can anyone suggest a solution. Would upgrading to RealPlayer Plus be a good thing to do?

I'm downloading using RealPlayer But the video playback is jerky. The audio playback is OK.
Please can anyone suggest a solution.
PS Would upgrading to RealPlayer Plus help?

I can't understand how internet speeds can be the cause of the problem. My problem with a jerky playback is that I have already down loaded.   Could this be to do with my computer (I maybe able to persuade my wife that I need a new one). Earlier I was listening to a clip of the MJQ, downloaded from UTube, and although the sound was good the picture was not.
My computer is an iMac with an Intel Core 2 Duo with a processing speed of 2.8 Ghz. Does this information help?

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

Hi sir im using fcp 7 for video editing in i mac, how can i edit mts files in fcp 7 without log n transfer, is their solution for fcp 7?

>No, you are not right.
Going to question the biggest contributor to this forum? (Yes, my ego is talking). OK then...
>Install the QT-Plugin, restart your Mac and you will be able to import and use .mts files in FCP 7.
Sure...yes, that makes it POSSIBLE to read the files natively in FCP...if they come from a Panasonic camera. BUT...just try working with those files. Right away the system won't be nearly as responsive as it would if they were ProRes. First...there are no sequence settings for that format...so you'll have to use ProRes and have a green render bar. BUT, that's no big deal. The big deal is trying to work with the AVCHD format, which is VERY processor intensive...inside an application that doesn't like to work with much outside of the FCP editing codecs.
Is it possible? Sure? Will it work well...will you be as zippy and error free as if you converted to ProRes? Not by a long shot. OH, but don't just take my word for it. Go ahead...try it and see. No skin off my nose...no waste of my time. See how well this works.
I'm just here to relate real world working solutions to issues. And yes, I did try that plugin, and boy, was editing a pain.

Use Time Capsule for video...

Has anyone used Time Capsule for video streaming? How to connect to TV if it's pre-digital?

Time Capsule is not a Media Player.. it has zero ability to stream video. It has zero ability to do anything but hold files. It will sit there and hold your video files very happily .. but the dumb as a board hard disk and TC controls can do nothing with it.
You need a media player. And you need one that is able to be hacked or is not Apple. Apple work on itunes, although it is possible to use an Apple TV in the mix if you send video to it from ipad using airplay.
If by pre-digital TV it doesn't have hdmi input, then buy yourself an older media player that has component out.. there is no point buying expensive hdmi to analogue converters. You will eventually replace the TV and will definitely want to go digital. So get an Apple TV 1 that still works from ebay. And use one of the hacking methods. This has component video and you can also get composite out of it. And it will play files stored in the network. Other non-apple players will do the same. Just find one that is older design with component still but ATV1 can still work well. I use one with a crystal acceleration card running crystalbuntu firmware.

Using a Sony HVR-M25U for video playback

I know this isn't strictly a Final Cut question. I'm just hoping that some smart Final Cut editor is using the same Sony deck as I use and can help me out. Also, sorry for the length. I've included every detail I thought might be germane.
Since I started editing HDV I've always used Digital Cinema Desktop Preview for monitoring my edits. I suppose due to a lack of computing power it's never looked very good in motion, though it looks nice and clean when stilled. Today I bought an HDMI cable, hoping to allow me to monitor my work in FCP, sending the video via iLink (FireWire) through my Sony HVR-M25U to my HD monitor.
Now, I use my HVR-M25U Videocassette recorder deck to log and capture footage in Final Cut Pro. That works fine. I can view video straight off HDV tapes on my High Definition monitor via the HDMI input. That works fine. I can even use the Print to Video function and see the HDV output both in the LCD screen on the front of the deck and on the monitor through the HDMI input. The trouble I'm having is in using the M25U to monitor my editing via iLink.
In the old days, working with DV, I had a DSR 40 and I was able to use that deck to monitor my FCP output via iLink, taking a component out to my standard def monitor. Is there some reason I can't use this HDV deck the same way? I've tried refreshing A/V devices in Final Cut. I don't see any iLink or Firewire choices in my view menu. I do see a whole list of HDV (1440 x 1080) choices but they're all greyed out. These choices also exist in my Audio/Video Settings screen under "Playback Output" but, again, they are greyed out. Oddly, from having used the Cinema Desktop Preview, I have "Different Output for Edit to Tape/Print to Video" checked and under that pulldown the same eight HDV (1440 x 1080) choices do exist and they are not greyed out. Checked or unchecked, that doesn't change the Playback Output menu.
I can't see any logical deck settings to adjust. Under "IN/OUT" settings I have "HDV/DV SEL" on Auto, my "Video Out" as 1080i/480i and "i.LINK SET" (the DV down-convert) is off.
I've also tried shutting down FCP and relaunching and shutting the deck off and firing it back up. I've tried the deck first and then FCP and I've tried the opposite. I also tried restarting. Still nothing.
If I can feed HDV from the deck into my computer via iLink, shouldn't I be able to feed HDV from my computer to the deck? Like I said, I can record HDV via Firewire to the deck. Shouldn't I be able to see that same HDV output on the deck's LCD screen and also through the deck's HDMI output when editing?
In case it matters, I'm running FCP 6.06, OS X 10.6.2 on a 2 x 2.8 GHz Quad Core Xeon with 4GB RAM.
Thanks in advance for anyone who's taken the time to actually read this long question and a special thanks to anyone who might be able to help.
Peter

#25 HDV external Monitor Viewing
Shane's Stock Answer #25 - HDV external Monitor Viewing
To view HDV on an external monitor in high definition you are going to need to purchase a capture card, like the ones Decklink (www.decklink.com) or AJA (www.aja.com) offer. They will both play out HDV in real time. The catch is that you cannot view this on a regular TV or NTSC monitor. Since this is HD, an HD monitor will be needed. HOWEVER, both cards are capable of down converting the signal so that it can be displayed on an SD monitor. This won't be color accurate
The real reason why you can't monitor HDV through a Firewire camera is because Firewire HDV cameras don't decode incoming HDV streams and route them to their outputs like DV cameras do.
Good options for you are the Matrox MXO2...$500...coupled with an HDTV. Or a Matrox MXO (DVI connection) coupled with an Apple 23" display gets you good quality.
And there are the Decklink Intensity and Intensity PRO cards as well, and the AJA I/O Express...
You can, however, view HDV out via firewire as DV...lowering the resolution to that of DV, but still viewable. This is not full quality nor should it be used to judge the quality of your footage or used to color correct to. This is just a way to view the footage on a large monitor.
Here are some examples of some of the possibilities:
- DV or HDV sequence output to an SDI signal on a third-party interface
- An uncompressed NTSC or PAL sequence output to a DV FireWire output
- An HDV sequence output to a DV FireWire output
Sequence and output formats must have compatible frame rates. For example,
sequences with a frame rate of 60, 30, or 24 fps can be output to a 30 fps device,
but not to a 25 or 50 fps device.
Shane

Sony HDV Walkman not seen for video playback

Hello.
Bit of a problem - have just taken delivery of two spanking new Sony GV-HD700E decks to use in our edit suites at work.
Capturing from the decks works like a charm in both HDV (at both 1080i50 and 25p) and DV-PAL (4:3 and Anamorphic). Playback controls are also working fine.
The problem is when I use 'Print To Video' - everything works fine in DV, but unfortunately the settings under 'Video Playback' for all HDV formats are greyed out - I can't get ANY playback in HDV to the deck at all.
I've tried all the HDV Device Control Presets without success (including unplugging the Firewire cables, restarting the deck and the Mac after each change).
The Sony site says the device definitely takes HDV in, so I was just wondering if it's a driver issue?
Any ideas?
Thanks.
Jim
NB - I did plug the Firewire cables back in each time...
OS 10.5.2
FCP 6.0.2
MBP 2.33 and Mac Pro 8-core 3 GHz
Message was edited by: blooblooblum

What that means is you cannot externally monitor HDV without a 3rd party card or box. You can, however, Print to Video with HDV. I've done it successfully with a Sony V1U with FCS 1 (FCP 5.1.4) and now with FCS 2.
If everything is connected and powered up in the proper order, it should work with the same Easy Setup used to originally capture the footage for the project.
It's very important that the camera or deck be connected to the mac via firewire and then powered up before the computer is turned on. After powering up the mac, launching FCP, and opening your project, make sure the timeline window with your finished, rendered/conformed sequence is activated.
Then, go to Print to Video, make your selections, select the 'Start Recording Automatically' box, and hit OK. Your sequence will do some additional conforming, and then your camera/deck should begin to record as the sequence plays out.
In addition, make sure other firewire devices and cables are disconnected during the Print to Video operation. I've done it successfully with other drives and devices connected, but it could cause problems with certain setups.
Message was edited by: Red Jacket Mike

Using Powermac G5 for Video playback on TV, Best options?

Similar Messages

Maybe you are looking for