Using premiere pro 2014 project in 7.2.2

I need to use sequences from 2014, in 7.2.2, but can't import directly from newer to older versions of premiere pro. Is there a relatively simple way to work around this?
Thanks in advance.

Can only export to Apple Final Cut XML
Well yes that is the only option in the export.
And CC7 does import the XML. Just tried it again and no error message.

Similar Messages

Failure to import fcp7 project's xml into Premiere Pro 2014. Details below. Why is it crashing? Any thoughts?

Here are the details of my problem:
Premiere Pro 2014 (up to date)
Mac book Pro OSX Yosemite 10.10.1 with 2.8 GHz Intel Core i7 processor
Source footage includes a variation of codecs as follows: H.264 in a .mov container, 1920 x 1080 Apple Pro Res 422, Linear PCM
There are no error messages, the import into Premiere Pro 2014 begins normally but the "progress bar" never starts and then after about 10 seconds a blank white box appears followed by the pinwheel.
When the problem occurred I was trying to import a fcp7 project's xml file into Premiere Pro.
I emailed Adobe Support Tech the fcp7 xml file and it crashed his computer, however, I was able to successfully import one clip from fcp7 (an Apple ProRes 422, Linear PCM, duration 1 minute) from the fcp 7 project into Premiere Pro, but not the whole project or the bare essentials (the cut itself).
I am not running other software
Do you have any third-party effects or codecs installed? Not that I know of...
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU). ??????
I am using Mercury Playback Engine GPU Acceleration
The problem only happen when I try to import the FCP7 xml project file into Premiere Pro

Hi Lynn,
Have you inspected the XML file for any anomalies? That might be a way to see if any third party effects were used.
Thanks,
Kevin

What is the best PC laptop to use with Premiere Pro 2014?

I'm excited that I get to buy a NEW LAPTOP!!!
I'm editing a documentary with tons of footage. I'll use external SSD drive for files.
What is the best PC laptop to get for editing movies on Premiere Pro 2014?
I can spend up to $1500
Thanks SO MUCH for your help!!!!

premiere will run fine with the 7200rpm hdd. while editing, if your hdd/ssd isn't fast enough it will stutter and skip as it cant feed the data fast enough to premiere. thats with high bitrate footage, if you are using low bitrate footage the 7200rpm might work ok to hold your footage too. odds are that external samsung ssd will be fast enough to hold the media, project cache and any preview files. you shouldn't need another external hdd for export/render.
the ssd for internal will let windows boot faster and let programs open and close faster. once windows is loaded and programs are opened, they load into ram. there is little to be gained after that for ssd/hdd speeds while using most programs.

"Adobe Premiere Pro 2014.1 has stopped working" Open Project Error

Hey, everyone.
I recently tried to re-open a project file that I created earlier today. As soon as it loads, the familiar "Adobe Premiere Pro 2014.1 has stopped working" window comes up.
I created a new project file and it seemed to work fine. When I first started this project, I was having trouble using a ".m2ts" AVCHD movie file (PPro would crash in a similar manner), so I used Media Encoder to change it to a ".mov" Quicktime file. Seemed to work fine after I did that. This new issue only arose once I tried to re-open the project file after shutting down the computer.
Got any suggestions?
-Ross

Correction - I converted the ".m2ts" file to an ".mp4" file, not an ".mov" file.

How to transfer an unfinished project from premiere pro 2014 to premiere pro cs6

Ok I a not too savvy with my new MAC or computers in general but i used to work with Power Director excellent product on my PC. So how do you transfer an unfinished project from Premiere Pro 2014 to Premiere Pro Cs6

Um ... by basically re-doing the project ... as there's SO much added to CC since the CS6 version, the tools have changed, the available effects have changed, the underlying code has changed ... there's just so much that CC can do that can't be done in the old CS6 version.
You can try exporting an XML and importing that into CS6 ... sometimes that works better than others, it hath been stated. This is sort of like trying to put a modern engine with all the computer controlled gizmos & pollution controls & fuel injection and designed to work with a 5-speed auto transmission into a 1965 Chevelle. With the older 3-speed manual tranny. How do you do it? Rebuild everything ... both the engine & the car. Lot of work.
Neil

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of

After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014. It states "Adobe Premiere Pro 2014.2 has stopped working. A problem has caused it to stop working. Windows will close the program and notify you of a solution." When I used the trial I never received this message. Now after purchasing it I receive this error each time I open PP and am unable to use. it. Any ideas or support to fix this issue?

What does the detailed crash report say?
And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

Premiere Pro 2014 is crashing and freezing and I have to use force quit to get it to shut down.

Premiere Pro 2014 is crashing every day. i am running Premiere Pro 2014 on a 2013 imac with 3.4 GHz Intel Core i5 with 16 GB RAM. Playback on premiere continually freezes and the program crashes. Or the playback will start to freeze and then I save and close the project file/program, but the program will not close and I have to force quit. This is extremely frustrating. Premiere Pro CC was super stable and I rarely if ever had a problem. I have changed my permissions to give myself read/write. I have created a new project file in 2014 and then imported all my sequences from my updated project file but none of these strategies have worked. I am considering creating a new project file and going back to working solely in CC because I am on a deadline and troubleshooting this issue is taking up so much time.

I have had to force quit PP CC four times today. The fourth was when it crashed while trying to reopen it. I have had exactly the same problems as described above. I have no solutions to offer. I will go through a week of constant Premiere Pro bugs and poor performance then experience a period that seems too good to be true only to end up having a day like today. I can't believe that they call this a professional editing suite. It just wastes so much of my time pissing around trying to fix things and managing all the extra render and preview files it makes each time I have to save a new copy of a project which usually results in renaming it. It gets confusing after a while. Really not happy with this and have begun to learn Avid so as soon as this project is done, PP will be history.

I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

I'm using premiere pro CC 2014 (trial version) for 4k editing.
but I saw the play sequence problem.
whenever I play the sequence cut off only window (premiere pro cc 2014).
but mac was fine.
I can't using realtime play.
my sequence setting information
sequence > sequence settings
editing mode : custom
timebase : 59.94 frames/second
video
frame size 3840*2160
pixel aspect ration : square pixels(1.0)
fields : no fields (progressive scan)
display format : 60fps
audio
sample rate : 48000 Hz
display format : audio sample
video previews
preview file format : quick time
codec : Gopro Cineform
Maxium bit depth : uncheck
Maxium render quality : uncheck
composite in linear color : check
check it please my workstation spec.
1. HP Workstation (Z840)
    * CPU : Intel Xeon E5-2690v3 2.6Ghz
    * RAM : 128GB
    * Graphic Card : Quadro K5200

Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
Thanks.

Which Premiere Pro (CS6) project settings should I be using?

Hi there
I am currently trying to use Premiere Pro CS6 to edit a Skype video call I recorded using Super Tintin, and I'm not sure what project settings I should l be using.
At the moment I am selecting HDV/HDV1080i25 (50i) when I set up the project, but when I come to add the video file to the project timeline, I am told that the file settings do not match the sequence settings and I am prompted to either change the settings, or keep the existing ones.
When I select 'keep existing settings' the video appears in a very small box in the centre of a large black screen, which obviously isn't what I'm looking for. When I select 'change sequence settings', however, the video fills the screen, which is great, but the video and audio are out of synch (when I play the file outside of CS6, they are in synch). Any idea what I'm doing wrong?
If it helps, here is some info regarding the file I'm currently working with:
MP4, 9MB
Frame width: 320
Frame height: 240
Frame rate: 14 frames/second
Data rate: 529 kbps
Any advice or guidance would be greatly appreciated! Many thanks.

Select a New Sequence
Select any preset in a folder Mobile & Devices
go to the Setting tab
Set the parameters of the video and audio to your video file appropriately.
Save the preset under any convenient name.
create a sequence based on your preset.
Enjoy.

My Program and Source Monitor Stopped Working: Premiere Pro 2014

Heres how it all started.
I got an error which said I didn't have the correct video modules, then came the ugly face of BSOD. I restarted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all of my plugins and Adobe CC programs, and when I opened my project was completely scrambled. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This got the audio in my videos to work but now there's only a white screen on my my Source and Program monitor when I try to play my timeline. I did another system restore on Windows, went to my laptop manufacturers website and updated my bios, graphics driver, and processor. Also reinstalled windows updates, and my Adobe software, I've tried CC Cleaner before each install, tried going back to the previous version of Premiere and still nothing in my source or Program monitors.
MSI GE70
Intel Core i7 4700MQ Processor
NVidia GeForce GTX 765M / 2GB GDDE5
12 GB Memory
using .MTS footage from a Canon C100
Premiere Pro 2014.2
Things I've tried from other threads:
-I read that there might be a problem with the .MTS files so I've also tried starting a new project with .MOV files and h.264 and still nothing.
-I tried going into the project settings and choose "render with software", still nothing.
-I tried emptying media cache files under C://users/my user/app data/roaming/Adobe/common.....you guessed it, NOTHING.
-I tried using my daughters "Frozen" magic wand we bought her for Christmas to fix the problem with icy magic like Elsa did in the movie.......surprisingly, still nothing.
Any other ideas out there?

Hi,
Do you have Dual Graphics Adapters? You can check that under Device Manager > Display Adapters.
If yes, Disable Intel Graphics and see if it helps.
Have you tried to Trash the Preferences?
Rename the 8.0 folder to trash the preferences: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
Thanks,
Rameez

Premiere pro 2014 cross fades don't get saved or load as saved audio drops???

For no apparent reason premiere pro 2014 will not save cross fades... it saves them but wont load them
Audio is dropping out ....
I was given a project to make some changes to and every time I open it I need to recreate the cross fades and then export it and then check it and then recreate the cross fades that didn't export and then hope for the best!!
this is so unstable and there seems to be no apparent reason
any help would be magnificent

Hi Vince,
vince_email wrote:
...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
Thanks,
Kevin

Imported dvd into premiere pro 2014 as a linked file with audio and video but audio from previous editing file is playing with video

I am editing in premiere pro 2014 on a windows 8.1 system with 12 mega byes of ram. I imported a dvd into premiere from a .f4v that was
burned using freemakevideo converter.
I imported the DVD into premiere and the audio that is playing is from an previous project I edited with the program, as oppose
to, the audio that is linked with the video imported.
Do you know why this is? I cleaned my media cache and I rebooted my machine.
Please help

Without knowing the specs of your videos it is hard to say. I'm also running a Mac and am having no such issues.
My first thought is that you have something from a 3rd party installed that is causing conflicts. If all else fails try transcoding your mp4 files to a frame based codec using the Adobe Media Encoder. Pick one of the Apple production codecs or Jpeg compressed QuickTime.
Are you running a ram preview? Did you render your Premiere timeline? Are you new to AE?

Premiere Pro CC, Project / sequence settings help with GoPro 1080p / 60fps

Hi all,
I have just started using Premiere Pro CC with the GoPro Hero3+ black edition, but my video's, once exported do not look very smooth and clean like HD video should?
The video settings on the GoPro are 1080p / 60fps, narrow view (protune off), I then import these .MP4 video files into PP CC and use these sequence settings:
29.97fps
1920 x 1080 / 16:9
Square pixels (1.0)
No fields (progressive scan)
30 fps drop-frame timecode
Preview file format: I-Frame only MPEG
Maximum bit depth
So, my question is, should my sequence settings be at 60fps to match the 60fps I used to capture the video with? How should I edit 1080p / 60fps video in order to get nice clean, smooth HD video playback on youtube?
My export settings are:
H.264
1920 x 1080
29.94
Progressive
Square pixels (1.0)
NTSC
Profile: Main
Level: 5.1
Render at maximum depth
VBR, 2 pass
Target Mbps: 40
Max Mbps: 50
Keyframe distance box checked and says: 90
Use maximum render quality
Here is the video I uploaded to youtube: Deal Tri Summer Duathlon May 2014 - YouTube
What do you think?
Any help would be very much appreciated!
Kind regards,
Paul

No problem. When you click sequence > sequence settings, what does your editing mode say? I use AVCHD 1080p square pixel. You can change this to 'custom' which will give you more control over the settings if you need to, but if you use the method I described earlier then you shouldn't need to change anything. Maybe if some of your videos are 2.7k or 4k resolution mixed with 1080p videos then you could play with the settings.
Just remember that if you start a new project and have for example, four videos shot at 1080p and one at 4k, if you drag and drop the 4k video to the 'new item' bin then your sequence will match the 4k resolution settings and when you drag the other 1080p videos on the sequence time line, they will not fill the screen and would need to be 'scaled' in to fit the screen, thus making them look terrible. The best way would be to drag n drop the 1080p video(s) and then include the 4k video on the timeline and just 'scale' / 'crop' it to fit the screen.
All the best!
Paul

Premiere Pro CC Project bloating

Hi,
We are cutting a feature documentary using premiere pro cc v 8.1, Caravan. (it says 8.2.0(65) Build) at the bottom.
We have multiple projects housing logged footage from multiple periods of time. A total of 14.75 TBs
The biggest project is our rough cut project, currently at about 45mb
What we are dealing with is this - Once the project size crosses around 40mb or so, performance slows down, playback has issues, premiere crashes more often. It becomes generally difficult to navigate and work on.
We are working off of a 10gb ethernet server currently, However we had the same issue working off of a fiber server a couple of months ago. We are using multiple computers of course.
Is there a limit to project file sizes?
Any Suggestions?
Typically our computers typically have the following config:
4Ghz Intel Core i7
32GB 1600MHz DDR3
AMD Radeon R9 M295X 4096 MB
OS X 10.10.1
3.5Ghz 6-Core intel Xeon E5
64GB 1867 Mhz DDR3 ECC
AMD Fire Pro D500 3072 MB
OS X 10.9.5
Thanks!
Pranay

Hi Pranay,
We are cutting a feature documentary using premiere pro cc v 8.1, Caravan. (it says 8.2.0(65) Build) at the bottom.
I know it's confusing, but you are actually using Premiere Pro CC 2014.2 (8.2). I understand that the splash screen is confusing and I'm working on a better way of discerning your current version.
The biggest project is our rough cut project, currently at about 45mb
Actually, that doesn't sound too outrageous as far as file size. I have seen project files functioning fine when they are hundreds of MB in size.
What we are dealing with is this - Once the project size crosses around 40mb or so, performance slows down, playback has issues, premiere crashes more often. It becomes generally difficult to navigate and work on.
That should not happen with a project file of this size. This sounds like something different issue. Does this occur with a brand new Premiere Pro CC 2014.2 (8.2) project, or just projects that you have migrated from Premiere Pro CC 2014.1 (8.1) or Premiere Pro CC 2014.0 (8.0)?
We are working off of a 10gb ethernet server currently, However we had the same issue working off of a fiber server a couple of months ago. We are using multiple computers of course.
This could also be the source of your performance issues as Premiere Pro is not optimized for multiple users operating on a single project over a network. Can you test on machines that are not networked to see if you can isolate the issue to either Premiere projects or your network?
You can make a networked workflow operate acceptably if you have the entire system set up properly by a VAR with specialized knowledge and hardware components as there can be various pitfalls that can drive down performance. Are you working with a VAR or other video specialist that you can lean on for support?
Is there a limit to project file sizes?
A project file can grow based on the amount of instructions that are contained in it, which can include data for the Warp Stabilizer, etc. It can grow quite large and still function just fine. I would look elsewhere in troubleshooting your particular issue.
If you cannot find any solutions on the forum here, I would suggest contacting support: Contact Customer Care
Click the large blue button at the bottom of the screen.
Thanks,
Kevin

Premiere Pro 2014 Cross Fades don't save and or load and saved audio drops???

For no apparent reason premiere pro 2014 will not save cross fades... it saves them but wont load them
Audio is dropping out ....
I was given a project to make some changes to and every time I open it I need to recreate the cross fades and then export it and then check it and then recreate the cross fades that didn't export and then hope for the best!!
this is so unstable and there seems to be no apparent reason
any help would be magnificent

Hi Vince,
vince_email wrote:
...The only things that changed were an update to Yosemite, I started using Time Machine to make regular backups...
Please check this blog post. Updating from Time Machine can cause this issue: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later).
Thanks,
Kevin

Using premiere pro 2014 project in 7.2.2

Similar Messages

Maybe you are looking for