Using Prime Infrastucture 2.1 to get the DOT1X status of ports
Using Prime Infrastructure 2.1 is it possible to generate a report across multiple switches for the ports that are configured to use dot1x and those that are not? The goal of the report is to identify the percentage of ports currently using dot1x vs those that are "open" ports. I'd prefer the ports that "use" dot1x but are authentication open to be included in the group that is not using dot1x, since they really aren't. It would also be nice if trunk ports and those that are administratively down (shutdown) were not counted in either total.
The sample scenario would see 2 switches, find that that 80 of 94 ports have dot1x, and the 10 ports that are trunks or shutdown are not counted.
Not really.
You could sort of do that using Prime LMS's "netshow" functions - it allows you to run a show command (or set of show commands) across your network and provides the output in one set of results.
You could also create a compliance job in Prime LMS and use that to tell you which user ports are "compliant" with your desired state of having the "dot1x pae authenticator" command, for example.
Unfortunately Prime Infrastructure is lagging in its ability to do this sort of thing.
Similar Messages
-
After a recovery reinstall of 10.8.5 and using Safari 6.0.3, I get the message "Safari won't open because of a problem"
I'm not sure if this Safari is compatible. I also have Safari 7.0.4 in my applications folder, which i downloaded as an attempt to
solve the problem, but it isn't compatible with my system.Having two copies of Safari on the hard drive is what's keeping Safari from opening.
Move the 7.0.4 version to the Trash.
Then restart your Mac and try Safari.
Safari 7.0.4 won't run on Mountain Lion. Only v10.9 Mavericks. -
(IOS 7 update trouble) My music app icon is missing from my home screen and I have to go through the search to find and use it. How do I get the icon back on my home screen
Find which screen, folder it was moved to, and hold down the icon until the icons start shaking. Then drag it to the left or right edge of the screen, and it will allow you to move it to which ever screen you want it. When you have it there, tap the Home button to stop the icons form shaking.
Or do what hannahsage said above. -
Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
there has been an error occurred while connecting to Apple's online store try againBest I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
there has been an error occurred while connecting to Apple's online store try again -
I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?
Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
When using Firefox I can no long get the two finger enlargement to work on my Apple. The same site will enlarge using Safari, so I assume it has to do with Firefox
Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu. -
I am using windows 7 and can't get the print drives to load for F2210 printer
I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.
Hello @Imvertical
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try.
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I cant use my iphone because I'm getting the error message that I must connect to Itunes and when I do it says the only option I have is to restore my phone.
Try using RecBoot or TinyUmbrella to kick it out of Recovery mode.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
To get the User status of the Production Order
Dear all,
I have a requiement to get the user status of the production order, This is just below the Status of the Production Order,
I was able to get the Status of the Production order using the Function Module ( REL MSPT PRC ) etc
Can any body please help me in fetching this data.
with rgds
Ranjith SinghDear,
Please try with,
FM 'STATUS_TEXT_EDIT'
Or See function module PM_ORDER_DATA_READ
The status maintenace is done by SAPLBSVA
Use the Tables are :
JEST - Pass OBJNR of the Production ORDER (AUFK, AFKO tables)
or from
TJ02
TJ02T
Please take help from technical consultant.
Hope it will help you.
Regards,
R.Brahmankar -
FM for getting the SYSTEM STATUS in pp order.
hi,
i wnat to know what is the FM used to get the SYSTEM STATUS in pp order.
and the parametes needed t be passed.HI,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status TECO.
3. Double click the field "TECO".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box).
5. select the radio button from "Allowed" to Disallowed".
6. save your changes.
Here are the function moduels:
SYSTEM_STATUS
UPGI22_GET_SYSTEM_STATUS
UPG_GET_SYSTEM_STATUS
TMS_CFG_GET_SYSTEM_STATE
Regards
Sudheer -
Get the current status of IDOC
Hi,
I want the current status of IDOC.
Is there any function module through which i can get the current status of IDOC?Hi,
Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
Regards
Vinod -
Getting the Latest status with respect to DATE entered
Hi guyz, kindly help me in this scenario:
I have a DSO and a CUBE....
DSO:
cust
status code
status date
RAW DATA
cust status code status date
payer1 1 12/31/2013
payer1 3 1/3/2014
payer2 4 12/15/2013
payer2 2 1/10/2014
CUBE:
cust
0calday
qty (KF)
RAW DATA
cust 0calday qty
payer1 1/1/2014 10
payer1 1/2/2014 20
payer1 1/3/2014 30
payer1 1/4/2014 40
payer1 1/5/2014 50
payer2 1/1/2014 60
payer2 1/2/2014 70
payer2 1/3/2014 80
payer2 1/4/2014 90
payer2 1/5/2014 100
I need to have this report: (for example I entered 1/1/2014 - 1/5/2014)
cust status code 0calday qty
payer1 1 1/1/2014 10
payer1 1 1/2/2014 20
payer1 3 1/3/2014 30
payer1 3 1/4/2014 40
payer1 3 1/5/2014 50
payer2 4 1/1/2014 60
payer2 4 1/2/2014 70
payer2 4 1/3/2014 80
payer2 4 1/4/2014 90
payer2 4 1/5/2014 100
Is this possible in query? Or do I need to do this in start routine?
By the way, I can already show the QTY figures, I used CONSTANT SELECTION..My problem now is how to the STATUS CODE..How will I do this?
Thank you!
LoedLoed,If you are flexible with modeling level changes then i would suggest to stamp the values of status and status date against payer in cube.
Add the two objects ion cube.Do a lookup on the DSO from cube in End routine and based on payer fetch the value of status and status date against each payer.
Now once you have the complete data in the cube then at reporting level to get the correct status based on the validity dates you can refer my blog.
Status of Tickets based on their Dates
PS:If you need assistance in the coding part then let me know.
Regards,
AL -
Get the inherited status of attributes
Hi All,,
I have a requirement as below:
o Every time the program reaches a line where the attribute ID and/or position ID is different from the previous line or for the first line, all attribute values for the dedicated position and attribute ID that are not marked as Inherited need to be deleted.
For this i want to get the inherited status of the attributes(Whihc is present in my input file)
can anyone help me in this?
Moderator Message: Specs-dumping is not allowed.
Edited by: kishan P on Apr 12, 2011 2:12 PMHi,
Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
Regards
Vinod -
How can I get the report status?
I am using web service to connect to BI Publisher and run the report by java code. And I have questions still unclear, anyone who knows about it please help me.
1. Is there any method to get the report status, such as whether the report runs successfully or not.
2. If I have a huge table that binds with the template (maybe RTF template), how about the performance of the BI publisher?
3. I use the sample codes in the web service tutorial to run the report, but the out pdf report doesn't change when i add or remove the table data, how can I resolve it?
Thanks very much.Use the web services and use this function
getScheduledReportStatus
you will get the status of the report ran.
Possible values are: "Completed", "Error" "Running", "Scheduled","Suspended", "Unknown"
It is in the table XMLP_SCHED_OUTPUT status column :) -
How to get the Shipping status of a Invoice items in SAP?
Hi All,
Is there any way to get the Shipping status of a Invoiced Item ?
While i extracting Sales Invoice lines,i can get the shipping method and the shipping date,how can i confirm whether the item is shipped or not?.
Is there any table which contains the shipping status or any column in Invoice lines(INV1) which contains the shipping status?
Please help me to come out from that problem
Thanks
JanakiRamanHello Gilbert,
The column what you specified INV1.TRNSCODE is to know how the shipping was done. My question, Is there any field to specify the material was shipped or not?
Thanks
Janakiraman
Maybe you are looking for
-
Can i install windows server 2008 r2 under Windows Small Business Server - Premium
I have purchased Windows Small Business Server 2008 - Premium and i want to know if i can install Windows Server 2008 R2 and activate the same under the same license. Also if there is a link to download the ISO file of the server.
-
hello I wrote a technical french book on " iBooks Author" and I would like to Know witch catégorie I should choose?
-
Setting the language of the work item
Hi gurus, Does anybody know if it is possible to set the language of the workitem in the workflow to a different language than the log on language? By adding an extra step maybe?
-
BI Beans application deploy to Weblogic Server Error
Who can help me to resolve this error? I follow the "Deploying Applications to BEA WebLogic ServerVersion 9.0.3" document from OTN web site, but i use the BEA weblogic server 6.1,not weblogic server 7.0. When i deploy the BI Beans application to BEA
-
Webparts and user in source variation site's page not propagating target site's page
Hi , I have issue with variation. 1) User in people picker field in source page not propagating in target page 2) Webparts in source page are not propagating in target page No error in ULS log. Thanks, Dinesh