Using Printer Proxy?

I have an HP deskjet 1050. Until now, it has printed without a problem anything I send it. Now, after an upgrade, it is being controlled by Printer Proxy. It won't print. I can't access the print jobs queue or anything else. At one time it told me my printer had paused, but no menu ever comes up.

What upgrade? How are you connected to the printer? How is it controlled by "Printer Proxy?" Have you the latest HP printer drivers?

Similar Messages

Print Proxy Queue Won't Quit

On my Brother MFC connected by USB, the printer proxy app won't quit after the print job ends, and you have to click the proxy app's icon in the Dock, then quit the app manually. (You have to close it, as the computer won't sleep by itself after x amount of time if the proxy app is left open.)
This is only intermittent. You can tell in advance if this is going to happen by not seeing a little piece of paper icon superimposed over the printer proxy app's icon in the Dock. No piece of paper icon = proxy app won't quit.
Tried reinstalling all drivers, archive/reinstall, using Printer Setup Repair to "reset the printing system," permissions, Cocktail to deep clean caches including printer caches, all to no avail. New printing cables, connected directly without a hub. Happened on my HP LaserJet 3330 which died, and now on my Brother MFC-2070. Happened when I was using a Titanium laptop also, before the current G4 tower. Happens across many apps, although Office seems to provoke it more frequently.
Ideas anyone, short of trying a totally clean install and reinstalling all apps an drivers from scratch to see if that helps? The OS install I'm working on is back from 10.2.0, and has been upgraded and archive/reinstalled multiple times, and has been used on multiple computers over the years. My Word 2004 Normal template dates back to Word 5.1 and has been converted/upgraded several times (6.0, 98, 2001, X, 2004; could this be a culprit as well); should I rebuild it from scratch (hours and hours of work there, many custom menus, etc).
Quicksilver G4 (2001) Mac OS X (10.4.3)

Never got one answer, give up

Printer proxy problem? 300 jobs in my print queue.

I left my MacBook Pro on overnight. When I 'woke it up' about 24 hours later, I found that I had 303 documents in my print queue for my HP LaserJet 1320. Printer proxy has quit upon awakening in several instances before. This is the first time the queue has 'completed' printing of documents. Some of the documents were sensitive. Do you think my security/ID has been compromised?

“Windows Server Print Services 2012 Printer Queue” target is a part of Windows Server Print management
pack which is useful for collecting the print queue information.
The Base windows MP wont be able to do this.

Output type using ABAP proxy

Hi All,
Is it possible to create an output type for delivery or invoice using ABAP proxy? If yes do we need to follow some special steps(apart from the usual setting we do for EDI or print outputs) to be followed for this?
Regards,
Sajith.

Hi Sajith Hari,
I am not aware about the ABAP option but you can certainly use NACE tcode and select V2 or V3 accordingly for deliveries or invoices>go to output types and create your desired output types.
regards,
US

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

How do I get firefox to keep my option of not using a proxy in settings

Every time I change the proxy from auto-detect to use system proxy it does not stay once firefox is closed

If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

To save time, could I get away with just using ProRes Proxy?

Might be a dumb question. But please play along with me...
I've been battling with FCP-X since it first came out. Beach balls, crashes, failed auto saves, you name it. Sluggishness is my middle name. But I think it might be because I'm trying to force too much quality through my older, less powerful machines and my little firewire 400 hard drive. All three of my Mac are 3-4 years old, all are from the old "Core 2 Duo" era (not quad core processors), and are all maxed out at 4GB of RAM. While I've read that many people are having performance problems with FCP-X even on brand spankin' new suped-up Mac Pros with lots more horsepower than I'm running, I've long thought that my machines and their lack of power by today's standards may be at the heart of my sluggishness problem, especially given that most of the material I work with is shot in 1080 HD. (I've never actually tested it in FCP-X, but I'm assuming that things would speed along more like I've been used to in the past if I would just do everything in Standard Definition 480, but that ain't gonna happen.)
Like many, I shoot most everything in 1080 HD (usually 24p, sometimes 30), unless I'm occasionally shooting 720 HD at 60i for later slowing down to slo-mo.
Here's my question: Most everything I edit is for web delivery, and 99 percent of it is for my own use (not clients). Mostly podcast-like stuff, although occasionally I'll create something for my business website. Most of what I do is talking head type stuff, not a lot of motion (except for the 720/60i slo-mo stuff, which usually has some motion, which is why I shoot it at 60i for slowing down). Most of what I shoot is green screen talking heads, intended to be keyed in front of some innocuous background like some of the generators in FCP-X. I want it to look good. Even great. But given the limitations of power on my machines, I also don't want to invest an eternity in rendering and processing time. The work I'm doing with video just isn't that important. It's mostly for grins.
Until last night, I had been working exclusively in ProRes422 (aka "Optimized"). But last night I shot some footage and imported it into FCP-X, encoding it ONLY in ProRes Proxy. And frankly, I couldn't discern any difference. It looked every bit as good as the 422 stuff I'd shot before. There was absolutely no difference to my naked eye. That said, the footage I shot last night to test this out was not shot in front of the green screen (I'll test that out today or tonight), so maybe the Proxy footage won't key as well. (I've been stunned at how good the keyer is in FCP-X, but up to this point I've only been keying ProRes422 footage, not Proxy.) But really, based on just eyeballing the footage, I couldn't tell the difference between the Proxy footage and all the other footage I'd shot previously that had been imported and converted to "Optimized" ProRes422.
I'm not looking to deliver anything for broadcast television (if I were, I'd for sure use 422). I'm not doing any feature film type stuff. My video work consists mainly of stuff just for me, for my own personal amusement (and for the amusement of anyone who might watch it on the web). It's intended for YouTube, Vimeo, or occasionally (in smaller dimensions than 1920x1080) for deployment on my company website. Mostly, it's just me doing podcast-type stuff. Occasionally I'll shoot and edit something for church, or for friends. I like to think the production values of my stuff tend to be higher than, say, the footage Aunt Delores shot at Uncle Ralph's birthday party (okay, A LOT higher than that!). But my stuff isn't going to air on "Good Morning Flatbush" either (unless, on the off chance it should happen to go viral).
So let me make my question as clear as possible: Could I not get away with just using ProRes Proxy throughout my entire work flow, end to end, never switching over to ProRes 422 even when exporting? Honestly, it has taken hours just to render the keyed green screen footage on a 15 minute video, and just the other night, it took the better part of 4 hours (after it was already rendered) to export a 15 minute ProRes422 sequence to YouTube (and then the darn thing timed out, essentially wasting all my time). I'd rather just stay in Proxy the whole way through if doing so would streamline my workflow without compromising too much quality in the "look" of the video. Based on my very limited use of Proxy (just testing it out last night for the first time), I couldn't tell the difference. Maybe for web deployment, Proxy is all I really need.
Have any of you just stayed in Proxy the whole way through, never switching to 422 even when exporting? Might this be an acceptable work flow for some of us, especially those of us on older, less powerful machines? Is this a viable solution? Do any of you work this way? What's your level of satisfaction?
Thoughts?

A lot of what I'm shooting is being shot on a Canon XA-10. Some (and certainly all of the 720 footage, but some of the 1080) is shot on a 7D. And still more is shot on either an iPhone 4S, or even on a Flip Ultra (720p, 30fps).
Most is shot on the XA-10.
What I'm trying to avoid is the excessive render times (doesn't the ProRes 422 footage have to render as well?), and the ridiculously long times it takes to export. Would all that not be reduced significantly by sticking to Proxy the whole way? And what would the trade-off be? I mean, I honestly can't see any discernible difference. Maybe I will when I try to pull a decent key. (Haven't gotten that far yet in my Proxy experimentation.)
Of course, editing in Proxy and outputting using 422 requires that FCP-X encode to BOTH when importing, right? Doesn't that add yet another bit of time to the overall process?
I'm trying to streamline, and to reduce the overall amount of time I'm spending doing this stuff.

A new version of Firefox, which downloaded automatically, says Firefox is configured to use a proxy server that's refusing connections, even though I had access before the download.

I was using Firefox earlier in the day with no problem. About half an hour ago I tried to get on the Internet using Firefox (as always). When I did, I was greeted with a little dialog box showing that something was downloading. That's happened before.
This time, though, I was greeted by an error page that said Firefox was configured to use a proxy server that's refusing connections.
I'm not on a network. I have a desktop computer that connedts to a wireless modem that I share only with my wife. I didn't change my settings on either. Neither did my wife.
My "Connection Settings" box still says "use system proxy settings." There are no entries in the manual settings boxes.
I want to emphasize that I changed *nothing.*
I need to know, please, how I can set my computer to get back onto the Internet or, failing that, how I can go back to the previous version of Firefox.
Thank you very much.
Bob Murdich

You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

When I try to open Firefox I get a screen that says Firefox is configured to use a proxy server. I don't know what that is and I have no access to Firefox.

The above says it all, I think. I try to open Firefox and I get that screen I mentioned above. I have uninstalled and program twice and re-installed it three times with the same result.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can

While Printing using Print Button on Crysal Report Loses focus.

Hi all,
I am using CR XI along with VS2003 for developing my application.
My application uses a Treeview to list all the available reports, once user select one of the report. I am using another dll, which contain all the rpt files as Embedded Resource, for showing the report in Crystal report viewer.
Once report get loaded, I am using Print Button from Crystal report viewer to print the report.
report get printed properly..
However a strange behavior occurring, Form with Crystal report viewer control placed loses focus and immediate below window coming into focus (some other opened window get activated and bring to front and hiding my application).
Any suggestion would be appreciated.
Thank you
Riju K K

Hi Brian,
Thanks for you are reply.
I think I am not creating a separate process,
From my application, I am creating an instance of form (which is in another DLL) which is hosting Crystal report viewer.
If click "Print" button on the Crystal report viewer, I am getting a Printer selection form.
If I cancel from there ,my Crystal report viewer form get focus back.
If select a printer and click "OK". my Crystal report viewer form lost focus and some of the other window opened (word, ie, etc) before get focus.
My assumption is Crystal Report viewer's "Print" button may be using a separate thread for Printing.
that may creating this focus issue.
what you think?

How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

Hello,
Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
But it didn't help me.
Regards,
Erik van Lisdonk

U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
SFTP vs. FTPS in SAP PI
Regards,
Prateek

Javax.xml.ws.soap.SOAPFaultException: InvalidSecurity : error in processing the WS-Security security header error while invoking FinancialUtilService using HTTP proxy client

I am trying to invoke FinancialUtilService using HTTP proxy client. I am getting below error while i am trying to invoke this service. Using FusionServiceTester i am able to invoke service and upload file to UCM. Using oracle.ucm.fa_client_11.1.1.jar also i am able to upload file to UCM without any issue. But using HTTP proxy client i am facing below error. Can anyone please help me. PFA code i am using to invoke this service.
javax.xml.ws.soap.SOAPFaultException: InvalidSecurity : error in processing the WS-Security security header
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:135)
at $Proxy43.uploadFileToUcm(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstance$ClientInstanceInvocationHandler.invoke(ClientInstance.java:363)
at $Proxy44.uploadFileToUcm(Unknown Source)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.invokeUpload(FinancialUtilServiceSoapHttpPortClient.java:299)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.main(FinancialUtilServiceSoapHttpPortClient.java:273)
Process exited with exit code 0.
Message was edited by: Oliver Steinmeier
Removed attachment

Hi Jani,
Thanks for your reply.
I am new to webservices and we are trying to do a POC on invoking FinancialUtilService using HTTP proxy client. I am following steps mentioned in attached pdf section "Invoking FinancialUtil Service using Web Service Proxy Client". I have imported certificate using below command.
     keytool -import -trustcacerts -file D:\Retek\Certificate.cer -alias client -keystore D:\Retek\default-keystore.jks -storepass welcome1
Invoking
    SecurityPolicyFeature[] securityFeature =
    new SecurityPolicyFeature[] { new
    SecurityPolicyFeature("oracle/wss11_saml_token_with_message_protection_client_policy")};
    financialUtilService_Service = new FinancialUtilService_Service();
    FinancialUtilService financialUtilService= financialUtilService_Service.getFinancialUtilServiceSoapHttpPort(securityFeature);
    // Get the request context to set the outgoing addressing properties
    WSBindingProvider wsbp = (WSBindingProvider)financialUtilService;
    WSEndpointReference replyTo =
      new WSEndpointReference("https://efops-rel91-patchtest-external-fin.us.oracle.com/finFunShared/FinancialUtilService", WS_ADDR_VER);
    String uuid = "uuid:" + UUID.randomUUID();
    wsbp.setOutboundHeaders( new StringHeader(WS_ADDR_VER.messageIDTag, uuid), replyTo.createHeader(WS_ADDR_VER.replyToTag));
    wsbp.getRequestContext().put(WSBindingProvider.USERNAME_PROPERTY, "fin_user1");
    wsbp.getRequestContext().put(WSBindingProvider.PASSWORD_PROPERTY, "Welcome1");
    wsbp.getRequestContext().put(ClientConstants.WSSEC_RECIPIENT_KEY_ALIAS,"service");
    wsbp.getRequestContext().put(ClientConstants.WSSEC_KEYSTORE_LOCATION, "D:/Retek/default-keystore.jks");
    wsbp.getRequestContext().put(ClientConstants.WSSEC_KEYSTORE_PASSWORD, "welcome1" );
    wsbp.getRequestContext().put(ClientConstants.WSSEC_KEYSTORE_TYPE, "JKS" );
    wsbp.getRequestContext().put(ClientConstants.WSSEC_SIG_KEY_ALIAS, "client" );
    wsbp.getRequestContext().put(ClientConstants.WSSEC_SIG_KEY_PASSWORD, "password" );
    wsbp.getRequestContext().put(ClientConstants.WSSEC_ENC_KEY_ALIAS, "client" );
    wsbp.getRequestContext().put(ClientConstants.WSSEC_ENC_KEY_PASSWORD, "password" );
SEVERE: WSM-00057 The certificate, client, is not retrieved.
SEVERE: WSM-00137 The encryption certificate, client, is not retrieved due to exception oracle.wsm.security.SecurityException: WSM-00057 : The certificate, client, is not retrieved..
SEVERE: WSM-00161 Client encryption public certificate is not configured for Async web service client
SEVERE: WSM-00005 Error in sending the request.
SEVERE: WSM-07607 Failure in execution of assertion {http://schemas.oracle.com/ws/2006/01/securitypolicy}wss11-saml-with-certificates executor class oracle.wsm.security.policy.scenario.executor.Wss11SamlWithCertsScenarioExecutor.
SEVERE: WSM-07602 Failure in WS-Policy Execution due to exception.
SEVERE: WSM-07501 Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=null, composite=null, modelObj=FinancialUtilService, policy=oracle/wss11_saml_token_with_message_protection_client_policy, policyVersion=null, assertionName={http://schemas.oracle.com/ws/2006/01/securitypolicy}wss11-saml-with-certificates.
oracle.wsm.common.sdk.WSMException: WSM-00161 : Client encryption public certificate is not configured for Async web service client
at oracle.wsm.security.policy.scenario.executor.Wss11SamlWithCertsScenarioExecutor.sendRequest(Wss11SamlWithCertsScenarioExecutor.java:173)
at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.execute(SecurityScenarioExecutor.java:545)
at oracle.wsm.policyengine.impl.runtime.AssertionExecutor.execute(AssertionExecutor.java:41)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.executeSimpleAssertion(WSPolicyRuntimeExecutor.java:608)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.executeAndAssertion(WSPolicyRuntimeExecutor.java:335)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.execute(WSPolicyRuntimeExecutor.java:282)
at oracle.wsm.policyengine.impl.PolicyExecutionEngine.execute(PolicyExecutionEngine.java:102)
at oracle.wsm.agent.WSMAgent.processCommon(WSMAgent.java:915)
at oracle.wsm.agent.WSMAgent.processRequest(WSMAgent.java:436)
at oracle.wsm.agent.handler.WSMEngineInvoker.handleRequest(WSMEngineInvoker.java:393)
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleRequest(WSMAgentHook.java:239)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:220)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:98)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.client.Stub.process(Stub.java:259)
at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:152)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:135)
at $Proxy43.uploadFileToUcm(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstance$ClientInstanceInvocationHandler.invoke(ClientInstance.java:363)
at $Proxy44.uploadFileToUcm(Unknown Source)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.invokeUpload(FinancialUtilServiceSoapHttpPortClient.java:111)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.main(FinancialUtilServiceSoapHttpPortClient.java:86)
Caused by: oracle.wsm.security.SecurityException: WSM-00161 : Client encryption public certificate is not configured for Async web service client
at oracle.wsm.security.policy.scenario.processor.Wss11X509TokenProcessor.insertClientEncCertToWSAddressingHeader(Wss11X509TokenProcessor.java:979)
at oracle.wsm.security.policy.scenario.processor.Wss11X509TokenProcessor.build(Wss11X509TokenProcessor.java:206)
at oracle.wsm.security.policy.scenario.executor.Wss11SamlWithCertsScenarioExecutor.sendRequest(Wss11SamlWithCertsScenarioExecutor.java:164)
... 30 more
Caused by: oracle.wsm.security.SecurityException: WSM-00057 : The certificate, client, is not retrieved.
at oracle.wsm.security.jps.WsmKeyStore.getJavaCertificate(WsmKeyStore.java:534)
at oracle.wsm.security.jps.WsmKeyStore.getCryptCert(WsmKeyStore.java:570)
at oracle.wsm.security.policy.scenario.processor.Wss11X509TokenProcessor.insertClientEncCertToWSAddressingHeader(Wss11X509TokenProcessor.java:977)
... 32 more
SEVERE: WSMAgentHook: An Exception is thrown: WSM-00161 : Client encryption public certificate is not configured for Async web service client
File upload failed
javax.xml.ws.WebServiceException: javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-00161 : Client encryption public certificate is not configured for Async web service client
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:231)
at weblogic.wsee.jaxws.tubeline.FlowControlTube.processRequest(FlowControlTube.java:98)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:604)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:563)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:548)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:445)
at com.sun.xml.ws.client.Stub.process(Stub.java:259)
at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:152)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:115)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:135)
at $Proxy43.uploadFileToUcm(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstance$ClientInstanceInvocationHandler.invoke(ClientInstance.java:363)
at $Proxy44.uploadFileToUcm(Unknown Source)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.invokeUpload(FinancialUtilServiceSoapHttpPortClient.java:111)
at com.oracle.xmlns.apps.financials.commonmodules.shared.financialutilservice.FinancialUtilServiceSoapHttpPortClient.main(FinancialUtilServiceSoapHttpPortClient.java:86)
Caused by: javax.xml.rpc.JAXRPCException: oracle.wsm.common.sdk.WSMException: WSM-00161 : Client encryption public certificate is not configured for Async web service client
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleException(WSMAgentHook.java:395)
at oracle.wsm.agent.handler.wls.WSMAgentHook.handleRequest(WSMAgentHook.java:248)
at weblogic.wsee.jaxws.framework.jaxrpc.TubeFactory$JAXRPCTube.processRequest(TubeFactory.java:220)
... 19 more

Help with buying used printer, please!

I have 5 - 15AHP Laserjet Print Cartridges (my sister closed her office) ..... I have a LaserJet 4000 and the 15A doesn't fit of course.
I am thinking of buying a used printer so I could use these cartridges. 15A fits HP Laserjet 1000; 1005; 1200; 1220; 3300; and 3380. Can I get some suggestions on which one to buy and where? I really just need straight printing and don't want to spend a lot.
thanks
LK - Denver

While it is true that Canon does take some time to release official driver for the new OS, the reality with ML is that the current 10.7 drivers do install and function on 10.8.
For the iR2016, here is a link to the UFR2 v2.41 driver from Canon Australia.
Also, with the iR2016 supporting the PCL printer language, you could use the Generic PCL Laser driver included with ML. Although I am not sure about this Generic driver supporting A3 printing, so I would have to confirm this.

Using Printer Proxy?

Similar Messages

Maybe you are looking for