Using printers Control Panel - Photosmart B109n

I am trying to change a print cartridge using the printers control panel (the printer is not connected to a PC).
But I cannot find the selection on the control panel (aside from Print, Scan, Copy!)
I have previously found an Engineering menu by accident, but if I try to find even that I can't!
Can anyone direct me how to select the right menu?
Thanks
Nigel
This question was solved.
View Solution.

Hi Nigel,
I would recommend utilizing this document:
Checking Ink Levels
Thanks,
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

I am trying to download the newest Itunes to windows 7. I did have a previous version that I used the control panel to delete. When I click on download, I get a small partial window in the upper left corner showing Internet Explorer Cannot Display the Web

I did have a previous version of Itunes and Quicktime that I used the control panel Uninstall to remove. When I do the download, I get a small window in the upper left saying Internet Explorer Cannot Display Webpage. It is trying to get to ....itunes64setup. I did check to see that all old Apple directorories, etc have been delete. Help!

Okay. Let's see if you've acquired some kind of restriction for the download site. These settings checks/changes apply to the IE downloads, so we'll be trying to use IE again.
Head into your Internet Options control panel, and click the Security tab. Click Restricted Sites.
Check to see if the following website is listed as a restricted site:
appldnld.apple.com.edgesuite.net
If it is, remove it from your list of restricted sites and try another download.
If still no joy, head back into the security tab of the Internet Options control panel. Click Trusted Sites this time. Click the "Sites" button.
Add appldnld.apple.com.edgesuite.net as a trusted site. Uncheck the "Require server verification" box. Now click OK and try another download.

How do I delete or remove Hotspotshield completely from Firefox? I already deleted it using the control panel programs & features function.

I tried to delete Hotspot shield using the control panel function. Now it keeps showing up when ever I am using Firefox. I tried deleting the tool bar for it. But, it keeps coming back. it will show up on different accounts when I change pages. Like when I log onto the Telus account to pay bill.
So how do I get this removed from my computer completely?

Hi,
Please see [http://www.anchorfree.com/support.php this] (the uninstall section towards the bottom).
[http://hotspotshield.uservoice.com/forums/46095-hotspot-shield-support Support]
You can also [https://support.mozilla.org/en-US/kb/update-firefox-latest-version update Firefox to the latest] and consider to [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox].
[https://www.mozilla.org/en-US/firefox/new/ Firefox latest]

How to restore previous session using the control panel

I have tried all pathways through firefox with no results. There is a way to restore previous session using the control panel. I tried it before and it worked but I forgot to write down the pathway and lost this method. Does anyone know it?
thank you

I can't think of anything useful in the Windows Control Panel, but perhaps you were using the System Restore feature? As a shortcut for that, you could try the Previous Versions tab of the Properties dialog for sessionstore.js or sessionstore.bak.
First, I recommend backing up your current sessionstore files.
Open your current Firefox settings (AKA Firefox profile) folder using
Help > Troubleshooting Information > "Show Folder" button
Leaving that window open, switch back to Firefox and Exit
Copy sessionstore.js and sessionstore.bak to a safe location (e.g., Documents folder). If you cannot see those file extensions, try this Microsoft support article: [http://support.microsoft.com/kb/865219].
Then right-click sessionstore.js, click the Previous Versions tab, and see what is available.

TS4403 My Photo stream folder is empty on my PC (using iCloud Control Panel)

I am using iCloud Control Panel on a Windows 7 PC and my IPod touch (4th gen. running iOS 6.0.1) has photo stream enabled and is connected to wifi. I have the control panel set to auto-sync my photo streams, and when I open the folder on my PC I can view all shared photo streams--those shared originated by myself and by others. However, the folder for my photo stream (those not shared) is completely empty. Yet the pictures display in my photo stream on my ipod just fine.
I'm trying to sell the ipod (and currently have not other iOS devices). I would like to secure all of my photos before wiping the device.

I had the same problem with iCloud 2.0. There is another thread which posted a link to a previous version iCloud (v.1.1). I downloaded it, uninstalled v2.0 and I have my Photos syncing to my PC again. I am sure the iCloud version I installed will not support some of the new features in IOS 6 for Photostream, but I am not using them at the moment. So I will can wait until Apple issues version 2.1 of iCloud to fix these problems.
As a side from note, I was able to "check" the check box after several attemps. However, when going into the Photostream library in explorer, Explorer would subsequently crash on me. Hope it gets fixed soon.

2 iPhones, 2 iCloud Accounts but 1 Windows 7 PC. How do I use iCloud Control Panel so that changes made change both accounts?

Help!
We have two iPhones, each with an iCloud account as my wife and I have different contacts (some are the same though), text and e-mail requirements. However, my Win 7 PC will only allow one instance of iCloud Contol Panel to run at any one time, and so when a change is made to Outlook 2010, only one iCloud account is updated. I have got around this with the Calendars by sharing the information, so when I change my calendar it is reflected on her iPhone and iPad. But when I make a change to contacts, they are updated in Outlook, but not on her iPhone or iPad until I exit the iCloud Control Panel with my details and enter hers. It is way too easy then to end up with duplicates and alsort of chaos.
So what is the work around? Does anyone else have this problem?
Thanks in advance.

Hi Lars,
In the examples folder there are some examples for simple operator interfaces. In the programmer help file they is a section on creating a teststand engine and the steps involved. Uses these notes and say the LV simple operator interface you can match up the steps and how to achieve them. In the Resource Library under TestStand there are plenty of useful notes, code, presentations to help you on your
What you are trying to achieve is to start the teststand enine running from Labview. Open a sequence file. Once you have that sequence file loaded you can then start to manipulate the properties on that sequence, such as your local boolean.
Hope this gives some pointers
Regards
Ray Farmer
Regards
Ray Farmer

Problem increasing heap size using Java Control Panel

I am running a web-based bioinformatics package which uses a Java applet as the client application. It mostly works fine, but some large clustering processes don't complete, they just cycle endlessly. The user manual advises increasing heap space "by entering the following command in the Java Control Panel or Java Plug-in dialog: -Xms128M -Xmx256M." I can open the Java Control Panel OK and enter the necessary command in the Java Runtime Parameters box, but after clicking OK then Apply, the Runtime Parameters box is empty again and there is no increase in the heap size allocation. In other words, the change doesn't take effect.
I have already tried: adjusting one parameter at a time (max heap size first, then min); changing uppercase to lowercase M (-Xmx256m); restarting the browser after the change; rebooting my PC - none of these has helped.
Technical details: it's Java 6 standard edition, build 1.6.0_10-rc-b28; browser is Internet Explorer 7; operating system is Vista (Service Pack 1); PC is a 2.4 GHz processor with 2 GB RAM (so I have plenty available to allocate to Java). I have local admin privilege on my PC.
Help would be much appreciated, as I really need to complete these cluster analyses. I'm a biologist not a developer, so ideally I need a solution that doesn't involve major programming, though I'm OK with registry edits and use of the command line. Thanks in advance.

The failure to retain the parameters is a bug, per hdong in this [Java,net thread|http://forums.java.net/jive/thread.jspa?threadID=44540&tstart=0] dated August 14
"I did a little more research and found out that the problem is only with "-rc" or "-beta" versions of plugin. When 1.6.0_10 is finally released, the version string will be "1.6.0_10". Plugin works fine to set/get jvm parameters when version string is "1.6.0_10".
I am surprised that this issue was not discovered earlier. It was probably because the internal test binary use "1.6.0_10" as version string.
Yeah, it is a bug that will affect many manny developers. It will be fixed as soon as possible."

How to pass argument to the Java Plugin JVM w/o using the Control Panel?

I want to deploy an applet to be loaded by the Java Plug In
and fix some settings of its Java Virtual Machine.
The JPI Control Panel offers two ways to pass arguments to the JVM,
none satisfactory.
1. while interactive via the Control Panel Window.
This cannot be a solution for a deployed applet.
or
2. by editing the system generated file that stores
the settings of the Plugin Control Panel, using a property
named javaplugin.jre.params.
The problem with this method is that if forces to access
and edit this property file which is stored at various locations
depending the client platform. Then, it may collide with other
settings for other applets.
Is there a way to pass the arguments to the JVM
from within the html file?
Has anyone found a solution to this question?
JPS

I am interested in this issue as well.
Did anyone find a reliable way to specify the runtime parameters that should be used by the Java Plug-in in order to execute a given Java applet?
I believe a good place to specify these runtime parameters would be the applet's JAR manifest: only digitally signed applets should be able to set the desired runtime parameters...
Any comments / suggestion would be greatly appreciated.
Regards,
Marco.

Using Java control panel proxies in Java application

Currently I'm using the ProxySelector class in Java 5 to pick up the system proxy settings for my standalone Java application by setting java.net.useSystemProxies=true. I'm interested in leveraging the network settings in the Java Control Panel (on Windows) to determine the proxy settings, which are used for applets and WebStart. Is there any way to install the Applet/WebStart ProxySelector implementation as the default in my standalone Java application so that I can detect the same proxies in the same manner, rather than relying on the underlying OS settings?
Thanks in advance,
Jason

yea, this was really annoying me until i found thise post. You DO NOT have to re-install your ATI Catalyst drivers for it to work, you simply have to open the ATI Catalyst Control Center, click on the "3D" tab that is on the left, and make sure that your setting is at "Balanced". You can find this under the racecar animation. If you have the slider adjusted all the way to the right "Optimal Quality", then the java applications wont show up. I dont want to guess on why this is cause i dont know, but if you have it set to balanced then all the Java Apps should work as intended.
I hope this helped people cause i've spent an hour trying to fix mine

Cannot uninstall Mozilla Firefox 4.0.1, downloaded two days back using the control panel or the Revo Uninstaller.

I had downloaded Mozilla Firefox 2 days back, overriding the existing version 3.6.13.
But I find the new version rather unusable. I am very familiar with the FF 3.6 version, which I have been using over 2 years. Hence I would like to revert back to the earlier version 3.6.13.
Mozilla Help informed that I should first uninstall version 4.x and then reinstall the earlier version.''But I am unable to find the version 4.x, either through the Control Panel or through the program Revo Unistaller'''. '''How can I proceed to restore back the earlier version 3.6?'''

'''@jef001 :'''
Thanks for your helpful answer. However, now after a few trials and errors in using FF 4.0.1, I have got the hang of using the same fairly well and I shall continue with the same .
'''@Editor:'''
Thanks for your comments . I think that my wording in the question has caused some ambiguity. Actually, I updated using the Mozilla FF Help menu only. I was trying to '''uninstall''' the new version using the Revo Uninstaller, as I did not find the FF 4.0.1 in the Windows Uninstall List, and not '''installing''' it through Revo Uninstaller. However, my above reply to jef001, should clear up the issue of my continuing with FF 4.0.1 .
- - arasan77

Can't log in using windows control panel

Hello,
I have a Mac with a virtual machine where I run Windows Vista. In Lion, iCloud is working fine but in Windows (where I use Outlook) the iCloud login screen is frozen (seems like trying to validate the username) without any progress.
I know it's not an issue of wrong iCloud username because it works ok in my iPhone and in Lion.
I have tried uninstalling an reinstalling the iCloud Windows control panel and iTunes and still doesn't work.
Do you have any suggestions?
Thank you.

I found out the solution.
I previously had uninstalled MobileMe Control panel, what solved it was installing again MobileMe Control panel, a new one available for download, which includes the funcionallity to migrate to iCloud.
Once done that it works ok.

TS1424 I tried to update itunes on vista computer. It went crazy. I removed ituns using the control panel. When I tried to reinstall itunes i get a runtime error or a R6034 error. Help. This is on two computers. The windows 7 64 bit computer uploaded the

I need help downloading itunes on two vista 32 bit computers

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Download photos from iCloud to PC using iCloud control panel.

I downloaded iCloud control panel on my PC (Windows 7), checked photos check-box and pressed APPLY, but did not get my photos back as I have waited long time and checked photos folder!!!
I have more than 2500 photos uploaded to iCloud, so is it going to take long time to be installed in my PC? Or am I doing it in the wrong way?

I know that on a mac, photos go to iphoto, I believe there is a windows alternate that is the same for when you plug in your iDevice it opens up this photo app?

Using printers Control Panel - Photosmart B109n

Similar Messages

Maybe you are looking for