Using printers in process

Hi
I am trying to use output services to print a pdf by filling in the printerURI with \\server\printer as the URI.
From API on the internet:
printerURI
A string value that represents URI of the destination for the print output. The Output service sends the print stream to the printer that this URI points to. For example, \\PrintServer\Print1.
And i get the following error under failure folder of my watchfolder:
Failure Time----Thu Feb 14 13:37:23 CAT 2008
source location ---- Reason of failure is-----Failure to invoke the job output
Failure to invoke the job output
Invocation error.
Printer \\Wayne\Laserjet1300 not found.
ALC-DSC-600-000: com.adobe.idp.dsc.provider.service.scheduler.impl.SchedulerRuntimeException: Failure to invoke the job output
at com.adobe.idp.dsc.provider.service.file.scan.impl.FileScanJobImpl.invokeJob(FileScanJobIm pl.java:323)
at com.adobe.idp.dsc.provider.service.file.scan.impl.FileScanJobImpl.processInputs(FileScanJ obImpl.java:127)
at com.adobe.idp.dsc.provider.service.scheduler.scan.impl.AbstractScanJob.execute(AbstractSc anJob.java:56)
at sun.reflect.GeneratedMethodAccessor333.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:181)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:134)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:44)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTr ansactionCMTAdapterBean.java:336)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(Ej bTransactionCMTAdapterBean.java:212)
at sun.reflect.GeneratedMethodAccessor329.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:363)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:166)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy210.doSupports(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:104)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterc

Hi
Paul Guerette :
I am using JBoss and I am invoking it using a watchfolder.
WorkflowUser :
I tried using the IP address. Still nothing
the problem might be that where JBoss run, the machine not on the domain so I tried doing from my laptop that's on the domain.(Drop in shared folder of the watched folder from my laptop and not from the same machine where JBoss runs)
Alvin

Similar Messages

Sale order bom can be used in to process order or not

To change the BOM for particular order items the sale order BOM can be created , to copy the sale order BOM into production order CO08 can be used , whether the process order can be created with ref to sale order any option is available is SAP

Hi,
There is no such transaction for process order with respect to Sale order.If planned order is created with respect to sale order after MRP,that can be converted to process order thorugh COR8 transaction.
try to explore COR8 transaction

Server 2012 R2 SMB - The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.

Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using XMLDOM to process document in XML DB

I am new to XML and especially XML DB which I however see as an excellent platform on which to base XML based solutions. I have a specific question and apologise beforehand should any of my assumptions be incorrect.
I wish to create an application which from a number of XML fragments, together with rules governing the behaviour of the fragments (insertion points, overwrite rules etc) are merged together to finally leave me with a complete and valid XML document in XML DB.
I thought at first that I could use DBMS_XMLDOM to perform this low level processing required. I have however not managed to understand how this can be used together with XMLDB. I am reluctant to use XMLDOM without XMLDB as I am afraid that I will surpass the limits in XML document size apparently imposed by XMLDOM.
I see a solution where I create a schema based resource in XML DB containing the initial XML structure and then processing any number of the above mentioned fragments to finaly be left with a complete XML document.
Can I use XMLDOM to do this or am I barking up the wrong tree?
I would be grateful for any input on techniques that I can apply to perform elementary search/replace/insert on an XML document which I am, from PLSQL, compiling.
Thanks
Hans Christiansen

Hi
The size of the documents I want to compose are expected vary from a few Kb to 1 or 2 Gb! In a FAQ found somewhere on OTN there was an entry which mentioned that somebody was having trouble with a 50Mb XML document. The recommendation was to use SAX but I am under the impression that this is more useful when the processing is of a more sequential nature.
The main thread of my question is to gain clarity in the most suitable technique to use when actualy compsing the XML.
What I want to do is:
Create resource (XML document) in XML DB.
Loop through XML fragments together with rules:
For each fragment process according to rules and insert
fragment or update existing XML based on fragment contents.
At the end of the loop the XML document is complete and ready for further processing.
XMLDOM seems to give me the tools to do this but I am unsure of how to do this and have XMLDOM work directly against the contents in the resource controlled by XML DB (making use of possible indexes and the scalable nature of XMLDB). I get the feeling that if I simply read the XML from XMLDB resource into a DOM document I am still using the memory based representation of the XML until I write the XML back to XMLDB - is this a correct assumption.
Alternatively is it the functionality offered by XPath, extract(), updatexml() etc. that I should be looking at?
Does this make my question more understandable?
Hans

Mail is using 100% CPU processes - wondering if I possibly have the answer?

Hi...
I have a big problem with Mail using all the CPU processes but may just have found a possible solution. I'm posting to see if anyone else shares this problem or can shed some light on whether or not this is a possible solution.
_*The Problem*_
Over the past couple of weeks, I've noticed that Mail is using on average 100% of the processes and sometimes up to 168% (I have screenshots to prove it). My 17" MacBookPro gets very, very hot and the fans spin up to cool it down so it's obviously not right as it's never done this before. I can only use Mail intermittently now as the machine overheats quickly soon after Mail starts up. As a result, the CPU is being hammered so I can't now use Mail or other CPU intensive applications properly, which is a big problem.
I've used the iStatPro widget to verify that Mail is constantly using 100% of the CPU processes. I've also verified this using Utilities / Activity Monitor. When the Activity Monitor application loads, I've selected Mail from the list of Process Names and then clicked Inspect. I've managed to identify the parent process as being launchd (110) which is using all the CPU power. Here are some other stats for this parent process:
%CPU 95.56 (at that specific instance)
Threads 15
Ports 275
CPU Time 3:30.55
Context Switches 310968
Faults 65795
Page Ins 1
Mach Messages In 272627
Mach Messages Out 65025
Mach System Calls 1459878
Unix System Calls 103120
I guess the important bit is the first bit that says 95.56%.
I have screenshots to back this up but no way of posting them here. I have also managed to use Activity Monitor to generate sample data that the process is creating and again there is no way of posting an attachment here but there is lots of sample data from the process to look at. I've compared the sample data from my MacBookPro to a colleagues machine and the difference between the sample data is enormous. There is obviously something very wrong happening.
Here's some basic info about my machine, with the serial number removed:
Hardware Overview:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version: 1.14f5
Sudden Motion Sensor:
State: Enabled
System Software Overview:
System Version: Mac OS X 10.5.6 (9G55)
Kernel Version: Darwin 9.6.0
Boot Mode: Normal
Time since boot: 1:44
_*The Possible Solution??*_
I recently installed a Beta version of Daylite 3 as I was interested in the application and remembered that it integrates closely with Mail. I wondered if Daylite was constantly trying to communicate with Mail and having problems. Having uninstalled Daylite 3, the problem of Mail using all the processes has so far not reappeared. Mail is now using very little of the CPU processes as is usual. However, I'm currently at home instead of on my network at the office so I'll wait to see if the problem still fails to appear when at work.
I know other people have had problems with Mail using 100% of the processes. Have you also installed Daylite 3? There has been some talk of Flip4Mac being a possible culprit but I use Flip4Mac and haven't previously had the problem. The only recent change and connection I can think of is an install of Daylite 3.
I don't want to talk down Daylite 3 but it's the only thing I can think of and having uninstalled it, the problem hasn't occurred. I hope I have stumbled across the solution but any thoughts, shared experiences or feedback would be greatly appreciated...
Many Thanks,
Nigel

Hi...
Thanks for the post. Not sure what you mean when you say "What does Mail say it's doing?" Can you be more specific and supply specific instructions to follow so that I can give you the information you need?
I've sampled the process but can't post any attachments on the forum. I've listed what the Activity Monitor stats are saying at the top level in the post above.
This is a serious problem that's hammering my machine and making it overheat and almost making it unusable. Any feedback or instructions anyone can give me for what info to supply to help you determine what the issue is would be greatly appreciated. I'm hoping to find a solution here rather than have the machine overheat permanently and eventually fail, leaving me to sort it out with AppleCare.
Help!
Clown Guy

While deleting the virtual machine .vhd folder -- error msg : the process cannot access the file beacuse it is being used by another process

When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
Thanks

Also, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

I cant figure out what is wrong i keep getting this an OIEception that says "{"The process cannot access the file because it is being used by another process."}

I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor Orb

Hi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb

Files cannot access because they are used by another process

I am trying to delete some files in:C:\inetpub\wwwroot\my_site\Under my_site, there are many files and folders, including bin folders which has some .dll files. As soon as I run the script, I get an error message that some of the .dll files cannot be accessed because they are being used by another process, and on some dlls, I get a permission denied error.I don't know what the problem is. I am using the following script, which works perfect for any other folders, but not for the one I am trying to delete. $content = get-childitem 'C:\Backups\my_site'
$sortedContent = $content | Sort-Object LastWriteTime -Descending
write-host "This is the list of all the backups for my_site :"
$count = 1
foreach ($item in $sortedContent)
Write-Host ("{0}: {1}" -f $count, $item.Name)
$count++
# 2.Take input from user
$itemNumber = Read-Host "Please select which backup you want to restore"
$confirmation = Read-Host "Are you Sure You Want To Proceed:"
# 2.Take input from user
if ($confirmation -eq 'y') {
# 3. BACKUP script
./bacup_mysite.ps1
# 3. BACKUP
# 4. DELETE CONTENTS OF my_site
get-childitem "C:\inetpub\wwwroot\my_site\" -recurse | % {
remove-item $_.FullName -recurse -force
# 4. DELETE CONTENTS OF APP
# 5. COPY CONTENTS OF ZIP INTO APP DIRECTORY
$itemNumber = $itemNumber -1
if($sortedContent[$itemNumber].PSIsContainer -eq $true)
$src = $sortedContent[$itemNumber].FullName + "\"
$WebzipPath = $src + "my_site.zip"
$Date = Get-Date
$folder_date = $Date.ToString("yyyy-MM-dd_HHmm")
$tempPath = 'C:\_Temp\Restore\my_site_restore_' + $folder_date
if (!(Test-Path -path $tempPath))
New-Item $tempPath -type directory
./Library/unzip.ps1 $WebzipPath $tempPath
$tempPathWeb = $tempPath + "/my_site/*"
Copy-Item -Path $tempPat -Destination 'C:\inetpub\wwwroot\my_site\' -Recurse -
force

am using a script which backups the folders and than in the next block tries to delete those folder from there original location.This is the script
if ($confirmation -eq 'y') {
# 3. BACKUP script
./bakup_mysite.ps1
#If i put a Read-Host here it does stop and than ask user to press any key and than it
deletes the next block, but i want to put a wait so user does not have to press any key
and everything happens automatically, # 3. BACKUP
# 4. DELETE CONTENTS OF my_site
get-childitem "C:\inetpub\wwwroot\my_site\" -recurse | % {
remove-item $_.FullName -recurse -force
}I would like the backup to finish first and than delete the original files, because if i use the above script while backup up some files gets locked and at the same time the next block gets executed and it tries to delete the files thats why i would like to put a wait for backup to finish
Check your assumptions. How do you know that backup is the only process that might have a lock on those files?
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Backup stopped before completing. The process cannot access the file because it is being used by another process

I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..Michael

I am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '‎2011‎-‎03‎-‎25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure

Move-item: The process cannot access the file because it is being used by another process.

Hey,
I have a powershell script where I first use Get-childitem to receive a number of files.
Then I do some stuff with it and try to move the file afterwards.
Unfortunately if I am using a lot of files I receive very often the error:
The process cannot access the file because it is being used by another process.
Even -Force parameter does not help further.
Based on my look around it is not used by another process.
I think it is still 'in use' by powershell from script commands previously.
Is there any way to 'see' if the file is still in use currently and wait for this to end?
Or can I 'close' the current usage of the file?
Thank you :)

Hey,
Thank you.
I build the following function.
But either the $return = $true I receive "The process cannot access the file because it is being used by another process." when I try to move-item... :(
Function Wait-FileUnlock($FilePath){
Write-Host " "
$FileInfo = New-Object System.IO.FileInfo $($FilePath)
DO{
try{
$fileStream = $fileInfo.Open([System.IO.FileMode]::Open, [System.IO.FileAccess]::Read, [System.IO.FileShare]::Read)
$return = $true
catch{
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
$return = $false
While($return -ne $true)
$Error
return $return
Another functions is:
Function Wait-FileUnlock($FilePath){
Write-Host " "
DO{
$Error.Clear()
Rename-Item $FilePath $FilePath -ErrorAction SilentlyContinue | Out-Null
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
While($Error.Count -ne 0)
This one waits .. but it seems not to end waiting at any time :(

[HTML]SignTool Error: The file is being used by another process.

Hello,
I receive this error from building a JavaScript app on a build server:
SignTool Error: The file is being used by another process.
This reproduced when building on local machine, and goes away after building again. However, our company uses gated builds so the first failure will stop an entire 2.1 hour build and I can't ship the product.
The instruction to launch SignTool is located in external files so I can't disable it, run it twice, or run it in a while loop until succeeds, ignoring failures. I have to get it to work right the first time. I looked on MSDN, and there are other people
who had this problem and never solved it.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5871d64c-e178-4f5c-85cd-a603fe56d6c7/signtask-signtool-error-the-file-is-being-used-by-another-process?forum=msbuild
http://www.codeproject.com/Questions/275454/Can-anyone-help-me-with-Signtool-Setup-Deployment
http://qualapps.blogspot.in/2006/12/code-signing.html
The only clue I have is our solution having build configurations that aren't called "Debug" and "Release", which have been cloned from Debug/Release and have WinRT apps building. If the build script for WinRT depends on anything being
called "Debug" and "Release" it wouldn't work correctly.
In any case, there is no documentation for SignTool that mentions this error - how do I fix it?

Hi TripleRectified,
>> If the build script for WinRT depends on anything being called "Debug" and "Release" it wouldn't work correctly
What's you version of Visual Studio, on my side, in the Visual Studio 2013 Update 4, I created a new configuration(Copy Settings from "Debug") to build a WINJS project, but I can't see the exception you mentioned.
>>This reproduced when building on local machine, and goes away after building again
Does it happen on all local machines? We need to exclude environment facts first, for example: Tool, OS etc.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352). ?

I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
Thanks

MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue.

The process cannot access the file because it is being used by another process with Execute package task

Hi,
I've a master package that calls other packages with an Execute Package Task. Sometimes we have an error: "The process cannot access the file because it is being used by another process" and sometimes not. It seems random.
We are working on a Terminal Server and the SQL Server database engine and the files are placed on another server. It seems that the errors doesn't occu when we run the packages on the server with a job. We can't log onto the windows server on this machine..
Hennie

I've seen this myself. On most occasions an immediate rerun would fix the issue. As stated this happens only when we try to run this from BIDs. From SQL agent job it always runs fine.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error occurs during reseed - the EDB file is being used by another process

Greetings,
We were notified today that one of our databases in an Exchange 2013 cluster is currently in a failed state. We have three servers - two at the primary site and one in the DR site. The database has a mounted and healthy copy on its preferred server, but
the secondary copy is now failed with a pretty high CopyQueueLength.
I've done plenty of reseeds with Exchange 2010, and I understand that Exchange 2013 will do an automatic reseed in the event of a failure. However the auto-reseed is generating the following message:
Automatic Reseed Manager failed to execute repair workflow 'FailedSuspendedCopyAutoReseed' for database 'DB05'. Error: The Automatic Reseed Manager encountered an error: The automatic repair operation for database copy 'DB05\mb02' will not be run because
one of the prerequisite checks failed. Error: There are no Exchange volumes mounted under root path 'C:\ExchangeVolumes', which are required for the Automatic Reseed component.
WorkflowLaunchReason: The seeding operation failed. Error: An error occurred while performing the seed operation. Error: The process cannot access the file 'M:\DB05\DB05.EDB' because it is being used by another process.
During the course of my investigation, I tried to rename the .edb file to .old and was told that the file is in use by Microsoft.exchange.store.worker.exe. There doesn't seem to be a way to kill this process, as every time I've tried I've been told that
access is denied. I'm not even sure it's wise to kill the process anyway (I'm only trying to kill the one with the PID that matches the database).
Attempting to manually reseed the database generates a similar error to the one above. I've failed all the databases over to the other server and restarted the Information Store service as well as the Host Controller service, but so far I can't seem to get
this file unlocked. One article I found did mention making sure that Exchange Servers is listed and given Read access to the folder. I did manually set this but I still see no change. I also verified that Symantec Endpoint Protection is set to exclude .edb
files, and the automatic Exchange exclusions are preventing it from scanning the Exchange install locations.
I'm curious if anyone has any suggestions that I might have missed so far. This is confusing the daylights out of me and I'd like to be able to get this reseeded. I suspect that even a full server restart won't clear this up, so any help would be great.
We're just starting to transition users over from Exchange 2007 to 2013, and I'd prefer to have a method of avoiding this in the future before we're in full production.

Thanks for your response, Ed! I really appreciate you taking the time to do so.
The ultimate fix for this was a reboot of the server and I was finally able to kick off a reseed. For the sake of thoroughness, here's the last two things we tried before rebooting.
I did try stopping the Symantec Endpoint Protection service on the server, but the job still failed in the same way. I'd also been given the recommendation to try stopping the Information Store service and try a reseed like that. Still no love. I've been
using ProcessExplorer, too, to try and isolate the lock, but didn't have much luck there, beyond what I already knew regarding the store.worker.exe locking the file.
I don't much care for the notion that I needed to reboot the server to remove that lock, I was really hoping for something less intrusive. But at least we've got it working and can move on with our day!
Again, thanks for your response, Ed!

One or more ports used by the Compute Emulator are currently used by other processes

Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MYCOMPUTER
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
   Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
   Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
   Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
   Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
   Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
                                       192.168.0.254
   DHCP Server . . . . . . . . . . . : 192.168.0.254
   DHCPv6 IAID . . . . . . . . . . . : 253808432
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
   DNS Servers . . . . . . . . . . . : 192.168.0.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
   Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
    <configSections>
        <section name="DevFCSettings"        type="System.Configuration.NameValueSectionHandler" />
    </configSections>
    
    <DevFCSettings>
        <add key="StartMACAddress" value="00155D201928" />
        <add key="EndMACAddress" value="155D20193C" />
        <add key="StartIPAddress" value="192.168.0.20" />
        <add key="EndIPAddress" value="192.168.0.40" />
        <add key="DipPoolStartIPAddress" value="127.255.0.0" />
        <add key="DipPoolEndIPAddress" value="127.255.255.255" />
        <add key="VipPoolStartIPAddress" value="127.0.0.1" />
        <add key="VipPoolEndIPAddress" value="127.0.0.255" />
        <add key="DefaultGateway" value="192.168.0.1" />
        <add key="SubnetMask" value="255.255.255.0" />
        <add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
        <add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
        <add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
        <add key="InternalEthernetPortMACAddress" value="00155D201927" />
        <add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
        <add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
        <add key="StorageRoot" value="DFTemp" />
        <add key="LogsDirName" value="DevFCLogs" />
        <add key="DynamicPortAllocStart" value="20000" />
        <add key="ManagementServicePort" value="15095" />
        <add key="RepositoryServicePort" value="15096" />
        <add key="AgentCallbackPort" value="15097" />
        <add key="AgentPort" value="15098" />
        <add key="PxeResponderPort" value="15100" />
    </DevFCSettings>
    <startup>
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
    </startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
    <add key="AgentMAC" value="00155D201927"/>
    <add key="AgentIP" value="192.168.0.2"/>
    <add key="EnableActiveNotification" value="false"/>
    <add key="StorageRoot" value="C:\DFTemp"/>
    <add key="CopyFilesInStartRole" value="false"/>
    <add key="LogsDirName" value="DFAgentLogs" />
    <add key="EnableFileLog" value="true" />
    <add key="AgentPort" value="15098" />
    <add key="RuntimePort" value="15099" />
    <add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
    <section
      name="dfservice"
      allowExeDefinition="MachineToLocalUser"
      type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
    />
</configSections>
<dfservice
    ManagementServicePort="15095"
    RepositoryServicePort="15096"
   />
<startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe   3736   TCP      MYCOMPUTER   7240   localhost   15095   SYN_SENT
devenv.exe   3736   TCP      MYCOMPUTER   7245   localhost   15095   SYN_SENT
svchost.exe   4332   TCP      MYCOMPUTER   7438   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10000   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10001   MYCOMPUTER   0   LISTENING
System        4        TCP      MYCOMPUTER   10002   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15095   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15096   MYCOMPUTER   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15097   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCP      MYCOMPUTER   15098   MYCOMPUTER   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   0   LISTENING
DFAgent.exe   14472   TCPV6   mycomputer   15098   mycomputer   6399   ESTABLISHED
System        4        TCP      MYCOMPUTER   15099   MYCOMPUTER   0   LISTENING
System        4        TCPV6   mycomputer   15099   mycomputer   0   LISTENING
DevFC.exe      4380   TCP      MYCOMPUTER   15100   MYCOMPUTER   0   LISTENING
Thanks in advance for help!
▼
▲
▼
▲

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

Using printers in process

Similar Messages

Maybe you are looking for