Using Project Manager to export a trimmed SD IMX-50 sequence, no reduction in file size is achieved.

Attempting to export a trimmed Project Managed version of a network promo containing NTSC/SD IMX-50 footage. The source file is 9 GB raw, the resulting trimmed 30-second spot should be under a gig, but Project Manager won't reduce/trim the source.

Are you using the "Create New Trimmed Project" option in a version of Premiere Pro that is CC 2014 (8.0) or earlier? If so, the "Create New Trimmed Project" is limited in the formats that it supports/trims. All MPEG formats will be copied in their entirety. i.e.: not trimmed.
Starting with Premiere Pro CC 2014.1 (8.1), Consolidate and Transcode was added, which may suit your needs. More information can be found at:
Adobe Premiere Pro Help | Copy, transcode, or archive projects
Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials

Similar Messages

16x9, 300ppi, 75mb tiff file, LR converts to 1mb jpg. Export in LR 5 is being done at 100%, no file size reduction.

I've got a 16x9, 300ppi, 75mb tiff file that LR converts to 1mb jpg. Export in LR 5 is being done at 100%, no file size reduction. Can't figure out why it is downsizing so small? Even upsized to 420ppi in PS and the export was still only 2mb. Stock agency wants 3mb .jpg minimum. Any help appreciated. Thanks.

Using PS CS6 with NO changes applied to the original TIFF the JPEG file size is 8.686 MB. The slightly larger file size is due to metadata differences between LR and PS.
Both Adobe applications (PS CS6 and LR 5.71) are producing near identical and much larger highest quality JPEG files. PS 12 Quality is the same as LR 100.
SUGGESTION:
1) Close LR and rename your LR Preferences file by adding the extension .OLD to it:
Mac OS X
Preferences
/Users/[user name]/Library/Preferences/com.adobe.Lightroom5.plist.OLD
Windows 7 & 8
Preferences
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 5 Preferences.agprefs.OLD
Reopen LR and it will create a new Preferences file. Try the JPEG Export again using the same settings as I have posted.
2) If still no change I suggest uninstalling LR, delete the new LR Preferences file created in step #1 above, keep the .OLD Preferences file, and reinstall LR 5.71.
3) If all is well now close LR and try restoring you original Preferences file by renaming the new Preferences file something like .OLD.OLD and removing .OLD from the original file.

Project manager - problem exporting a project with AE compositions.

I have a problem exporting my project to another disk, this is what happens:
I needed to move the project from the windows partition of my Mac to the Mac partition, in order to be able to continue my edit under MacOS, my sequences include a series of After Effects compositions of footage that has been stabilized in warp stabilizer using the option "replace with AE composition" from the timeline.
Using the project manager I started my backup operation, with these options:
Source: all sequences selected
Resulting Project: Collect files and copy to new location
Include Audio conform files
Destination: a folder in the Mac partition
The resulting project had a message popping up saying that AE rpject file is missing (it was, I had to manually copy and paste it from ithe win partition to the mac) and once copied obviously AE couldn't find the source video clips of its compositions, so I had to manually re-link them all (quite difficult job to do among almost two years of footage).
What have I done wrong ?
Why AE lose the connection with the fils?
Thanks

Thanks Jim,
I understand that Adobe Anywhere solves this, but there should be this fairly basic functionality (which exists in Avid and FCP) in a non-enterprise edition of the software. I have submitted a couple different feature requests about this, going back to CS5, so hopefully enough people make similar requests for a fix to be implemented. Adobe Anywhere is really not a solution for our small shop as currently configured/priced, especially when we can have editors working remotely with very affordable USB 3 drives. The only hangup is the markers, which just isn't worth a 5 figure fix. As such it's hard to consider the problem solved for either us or any small shop or post crew.
Best,
Jon

Exporting Pdf's for the Web, maintaining quality and keeping file size down

1) I don't have acrobat Pro yet.
I've been trying to export a small document 14 pages for email, and I can't get the file size down below 26 mgs even when I'm compromising images to an extremely poor quality. I have not had this problem with Cs3 previously. Not sure why the file size is so high. I don't want to have to down sample everything in other programs, would kind of defeat the purpose of proofing out the program in the first place. I'm wondering if the extra file size is related to metadata?

What preset are you using? How many images, and how large are they? how much vector art?
The first thing to do is to remove all unused swatches and styles from the document, then do a "save as" to remove the excess undo information, then try again.
And next time you should ask this type of question in the InDesign forum for your platform. This area is for discussing new features users would like to see. :)
Peter

Exporting a book to pdf - any way to reduce the file size?

Hi,
So I have made a book using iPhoto and would like to send a pdf copy of it to another person who will fill in the texts. I am able to save the book as pdf via the print menu but the resulting file is over 300 mb in size (the book has only 20 pages)! On the one hand i like the fact that iPhoto is not downsampling my photos but it's a bit difficult trying to send a 300+ mb file over email Is there any way to create a pdf with the images compressed so i could send it as an attachment?

http://beyondteck.blogspot.com/2008/11/how-to-reduce-pdf-file-sizes-on-mac.html
Google is your friend.
Regards
TD

Runtime Error! R6025-pure virtual function call when using Project Manager

Hi
I am trying to consolidate a project. I have plenty of destination HD space, 16gb RAM and am wearing the correct color socks today.
However, when I go to run media manager, I get a run time error R6025 - pure virtual function call.
I've tried the same project on two different machines and get the same result.
Has anyone come across this, and is there a fix?
Many Thanks
ADAM READ
Intermedia

Thanks for the reply John, but it's a codey, windows error thing. It's happening on 2 different machines, each with the same install of Premiere Pro, so I'm liable to think it's a PP issue. The MS website info on the error is very vague and certainly out of my skill set.
Perhaps I'll try the famous import into another project option.
Any other advice appreciated.
ADAM

Can I use an Indesign CC export html form in Muse, if so what steps do I take to achieve this?

I need to make a complex form for a website that requires a drop down list, calendar, radio buttons as well as the standard functions in the Muse contact form. This form will give feedback for specific items required to enable a quote for a job.

I have created more complex forms outside of muse... but never with InDesign... You should be able to paste the code with the insert HTML from the object menu. If you have separate script files for the backend of the form you will have to upload them separately to your web site. I wish muse a had a way to upload files that are not links as I do a lot of custom forms etc...

Share/export to wmv-9 format stops at 2-3 meg file size???

I cant seem to export/share a movie created in IMovie using the quicktime option and sharing it as a wmv-9 format. It stops after a minute or so and does only a short amount of the whole movie,2-3 megs, I don't have QTPro and wonder is the basic version has a limit on the output size of the wmv file? OR if I upgrade to PRO will it do the whole movie, 10 minutes in size??? I hate to have to convert to avi then go to a pc and convert to wmv..as I need a wmv as final output!

You must be using the flip4mac software to even be able to export to Windows Media Player format.
It requires QT Pro and only exports up to 30 seconds when used in "trial" mode.

Project Manager not trimming projects

when using project manager and creating a trimmed project the difference between the original nad new trimmed project is minimal
The large files within the project are H.264. Does Premiere have difficulty with this format as it seemed to work with Pro Res 422 (LT) files?

The previous versions of Premiere Pro did not support trimming of MPEG material via Create New Trimmed Project. It would copy the entire file(s). With the new Premiere Pro CC 2014 8.1 version, you have a new option for Consolidate and Transcode, which does support trimming of MPEG files to a chosen preset/format. Hope this helps.
Adobe Premiere Pro Help | Copy, transcode, or archive projects

Project Manager: Trimmed wavs Don't Play

I created a truimmed project using Project Manager. The project opens up but all of the wav files are blank! If I open one of them in Windows Media Player I get an error message about not having enough memory. And they are tiny files. Normal wav files open fine in WMP.

I just did a test. I created a project and only put one wav file on the timeline and nothing else. I then used Project Manager to create a trimmed project. I opened the trimmed project and sure enough, the new wav file contained no audio. Any ideas?

More Project Manager Woes...

So, I've created nested sequences in my edit for all the clips/sequences that I intend to send to my VFX artist. When I use project manager to create a trimmed project for these nested sequences, a load of the clips are randomly just not included. I open the generated project and about half of the sequences (in no discernible order) have clips missing from them, despite the Project Manager telling me that it had successfully managed the project.
Is there some mystical reason as to why I'm not supposed to be able to just have all of the clips in the nests be included in the trimmed project?

Peter,
According to several other users, the project manager actually ignores nested sequences, unless those sequences are selected by the tick box. Which, kind of makes sense. My problem was that I WAS selecting all of the nested sequences with the tick box, but after more investigation it seems as though the problem was this: if 'Nested Sequence 01' and 'Nested Sequence 02' both contain a clip from media file 'A001C001' then that media file would be trimmed to appear in 'Nested Sequence 01' but would then be ignored for 'Nested Sequence 02' and removed from the trimmed project, with no notification or indication at all unless I manually go through and check every sequence against it's counterpart in the original. This problem even occurs if, I go to each of the clips appearances in the different sequences, create subclips for each of them, place those subclips on the timeline in place of the original, and then convert those subclips to individual master clips. This is extremely frustrating and leaves with me with absolutely no confidence in Premiere's ability to do what is advertised. Furthermore, it's really screwing up my schedule for delivering my work to our VFX artist.
It's honestly really great that Adobe are constantly striving to have the most 'cutting edge' tools, like a project manager that finally contains features that have been included in Avid and FCP for ten years. But I believe I speak for a huge portion of customers when I say that, for the past few years, the updates to Premiere have felt like hopping from one damaged Beta version to the next. Please stop rushing out untested versions of the software with fancy new buttons and just focus on making the existing version, that people are already paying for, work properly and stably.
Best Regards,
Martin
PS. Kudos on successfully taking a complaint about a technical fault in your software and using it as an opportunity to sell me something instead of actually offering any real assistance.

Project Manager wavs Won't Play

I'm trimming projects using Project Manager but the resulting wavs don't play. Something about a specific module missing. All the avis play. All the mp3s play. What's going on?

I just did a test. I created a project and only put one wav file on the timeline and nothing else. I then used Project Manager to create a trimmed project. I opened the trimmed project and sure enough, the new wav file contained no audio. Any ideas?

Hi, when trimming a project through project manager I get blue lines and the video is missing. I'm using PP CC 2014. Why is this?

I have tried through Project manager to save a "Trimmed Project" but when I open up the trimmed project some video is missing or is the wrong video and on the timeline these missing videos have a diagonal blue line. Any idea on why this is happening would be greatly appreciated.

Is this a Mac? If so what version of OSX?

Feature Request: Project Manager Trim Compatibility with all formats please!

It's 2013, Premiere Pro CC is out, and is more "Final Cut Pro" than ever (thanks Adobe), but there are still some basic things that need to be fixed. This is a DOOZY!...
With DSLR media being used pretty much everywhere, the inability to created trimmed projects using Project Manager for H.264 clips (and GoPro clips, and more!) is simply insane. Seriously?
Help me Adobe.... please...
thanks
jesse

Actually, Kevin works right across the San Francisco Bay from where I live. So yes, he is here in the USA.
You will occasionally get some answers around here from people with Indian names, but we are happy to have them on the forums.
The conversation about how to deal with the various codecs has been going on for some time, and the more people who request the feature, the more likely they will get it done. I don't like to say that the squeeky wheel gets the grease, but pretty much? It does!
I know they are thinking about it because of some of the comments I have seen and emails I have received. It appears to be fairly complicated, but personally, I think it is well worth the effort.
I would like to be able to ingest subclips from Prelude without transcoding (I don't use Prelude because it is useless to me without this feature). Once ingested, if I only use part of a clip, I want it trimmed in the Project Manager to just the footage I might need in the future if I have to make minor adjustments. And yes, that includes handles. So if handles solve part of the problem, that's fine.

Project Manager does not slip clips in timeline (references pre-trimmed timecode)

Using project manager to trim down 100GB worth of ProRes 444 footage, the footage gets trimmed and imported back into the project fine using no handles but the clips on the timeline still reference the timecode of the old pre-trimmed media. All the clips on the timeline are crosshatched.
As I set it to trim with no handles I can slip each clip to the start but if there were any handles on the trimmed media this would be a nighmare.
Premiere CC
Windows 7
Chris

Hi benita,
It should be working as expected, sorry you are having trouble. It looks like the common denominators are ProRes footage and Premiere Pro CC (7.1). This is happening on both Mac and PC.
Related case here: http://forums.adobe.com/message/5853661#5853661
Please file a bug report and we will get to the bottom of this as soon as possible: http://www.adobe.com/go/wish
Thanks,
Kevin

Using Project Manager to export a trimmed SD IMX-50 sequence, no reduction in file size is achieved.

Similar Messages

Maybe you are looking for