Using proxy communication, is there any queues?

Hi,
I am going to use  proxy communication and i would like to know if there is any chance to have
queues in  R/3 and in XI? I think that it will not happen as there is no adapter is that true?
Thanks
Antonis

hi
There are queues in xi side which we need to register in xi by using sxmb_adm
check the below thread
Queue Stucked - Exactly Once Async Abap Proxy
Queue Stucked - Exactly Once Async Abap Proxy
regards
kummari

Similar Messages

  • Decision making on using proxy communication

    Hi gurus,
    We need to decide, if we should use proxy communication(sap>PI>Legacy) in realtime scenarios over file based communication(sap>file adapter>PI>file adapterLegacy) & also in comparison with RFC/IDOC adapters.
    Infact, most of the times it is situational, but, we need responses from all of you in general terms.
    Please respond with your suggestions/links supporting your views.
    More replies helps us to decide on this matter.
    Note:- we are on ECC 6.0/PI 7.1. Thank you.
    Cheers.
    santosh.

    > We need to decide, if we should use proxy communication(sap>PI>Legacy) in realtime scenarios over file based communication(sap>file adapter>PI>file adapterLegacy) & also in comparison with RFC/IDOC adapters.
    You should use the proxy over file based communication because proxy communication is faster and easy for error handling.
    RFC & IDOC have their own importance. For exaple if you have standard RFC & IDOCs then there is no meaning to got for custom developement.. and again if your requirement says to do some custom developement then you have to do that.. so everyting depends on your requirement.

  • Hi, I have lost my iphone but i have its backup in itunes, how can i restore my contact/sms using itunes or is there any other way, please help

    Hi, I have lost my iphone but i have its backup in itunes, how can i restore using itunes or is there any other way for this
    please suggest

    You can restore that backup to a replacement iPhone, if that's what you're asking. If you want to extract data from the iPhone backup, you'll need third-party software to do so:
    http://www.iphonebackupextractor.com/

  • I have a iphone 4 plan and when i got the phone i asked telstra to disable 3g so i couldnt use it. Is there any way of getting it back.

    i have a iphone 4 plan and when i got the phone i asked Telstra to disable 3g so i couldn't use it. Is there any way of getting it back.

    You need to arrange that with the carrier since they are the ones that disabled it.

  • TS1538 iTunes and wants me to connect. Problem us I don't have a computer ...just an iPad. My phone is frozen and I can't use it. Is there any way I can bypass this?

    I finally dud the update to my iPhone and now it's asking me to plug in to my computer and it shows the iTunes symbol. problem is I don't have a computer only an iPad. Is there any way of getting around that? My phone is not working. I have powered off and when it comes on it's still on the screen. Help??!

    No way around this. Your phone has to be restored using a computer running iTunes. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • How can I make a image slider using Dreamweaver? Is there any image slider widget I could use?

    I was browsing through the web when I saw a website which had a really cool image slider. I don't have any idea of how to develop anything similar, but I was wondering if maybe dreamweaver had any widget that has already been developed by someone else that is open source for everyone else to use. Is there anything any?

    Ken is referring to a "roll your own" slider that works great. There are lots of those.
    None of those are built in to Dreamweaver. None of those will give you a panel within Dreamweaver with which you can build them.
    Project Seven does sell widgets that are Dreamweaver extensions.
    Adobe is offering another one for free (and you get additional function if you buy it).
    Extend Studio offers Power Slider (with a free trial).
    And there is Nivo Slider.
    These are extensions that plug in and extend what Dreamweaver can do.

  • HT4848 I think I have erased to trash and also from trash My File system,. can anyone help me? I use Lion. Is there any way to recover files and automatically reinstall them to their proper place?

    I try to install my new La cie tripple rugged. So I thought: maybe for Mac and windows.(just if in future need to share something) The 1 TB was partitioned in 860 Gb hfs+ Guid, journaled + windows Fat 32 the other part. but what happens next is terrible.
    After that, i though this is weird, nothing is happenning and by nothing I meant I couldnt see the 2 partitions. ...
    WELL.
    tO MAKE IT SIMPLER... i erase it send evrything first to check the disk if it was properly funtioning, veryfied the disk. everything was ok.
    until I noticed that in my finder, In my Home has sevral folder, one of them is Applications that before I think it used to have a lot of things ...
    NOW EVERYTHING´S GONE. GONE LIKE THE WIND.
    I WAS TIRED, HEADACHE, HAD TO READ FOR HOURS AND ERASE FINALLY MY TRASH.
    NOW IM HOPELESS..
    Where and how can I reinstall and find those files? since there were from the applications.
    I have all my applications under my hard drive root. but not in Home I cant find my templates, or parts of the programs like ADOBE.
    Another thing: All my mail has stopped. I use Mail in my machine, now i cant receive any mail since it keeps telling me that the server smtp. has rejected my password. I preetty sure of what i write. i have them written  in a secure place.
    I NEED TO RECOVER THOSE FILES. IS THERE A WAY?
    PLEASE, I REALLY NEED HELP HERE..
    THANKS.

    Restore your backup.

  • I have just installed Firefox 6 but have noticed that I can not use Roboform. Is there any upgrade or add on that can solve this problem. Thank you John Edmunds)

    I would like to use Roboform with Firefox V6.
    Do you have any future plans to enable this to work on this verson or do I have to load a previous verson to work
    Thank you
    John Edmunds

    I think what we're looking for is JUST the adapter/extension for Firefox.
    If you run the RoboForm v7.4.1 installer, it wants to put the logins, identities, and safenotes on the local computer. It will also install the binaries locally.
    There used to be a Roboform Toolbar for Firefox 7.3.0 extension available for download. This extension hasn't been compatible with the last two Firefox releases.
    That's what we want back.

  • When I'm streaming photos to ipad from my PC, those will be in a streamed area. They do not show up in "pictures", and I'm not able to put them into an album. I'm using icloud. Are there any solutions of my problem?

    I would like to make an album at my Ipad. The first pictures I transfered, did get into "pictures", and I could make a photo album. Later I did get them into streamed areas, but they did not get any ways to make an album. They did not apply to "pictures", and when I make an album and tries to import the pictures, the streamed pictures do not show up. What can be done?

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I have an existing Apple Account but my brother and my parents are using it. Is there any way that i can transfer all the music purchases to a new apple account (once created, of course)

    My parents and my brother are using my apple id. They are using my cloud and my money. I want to create a new Apple ID. But if i do, is there anyway to transfer purchases such as music to my apple device which will have a different Apple ID than the one i purchased them with. Please help
    Thank you :)

    No, all content that you download from the store is tied to the account that downloaded it, it can't be transferred to another account

  • I want to measure direction of the car while sitting in that, without using GPS. Is there any solution?

    Please pose a solution so that I can make my required Electronic Component

    - Before GPS we had the instrument called compass.
    It began with a cork-floating needle and evolved to digital compasses, both pointing towards the earth's magnetic north. A short time I worked at a company that designed them for yachts. Due to all the metal inside a car I believe you should do some trimming.
    If you take this, combined with an inertial sensor (for the relative fast turns), you should be able to succeed.
    - Mobile-phone signal-strengths of base-stations should give rough position info, but that's beyond my knowledge.
    - If you need additional info on speed, I read an article that proposed to use the bumps in the road to measure speed (first bump on front wheels, then on rear wheels) by using an acceleration-sensor.
    - Early Carin sy
    stems used a sensor at the brake-disk for speed-info.
    So there are as ever, numeral sensor-options.
    Patrick de Boevere

  • My mail will not open or close when aim done using it? Is there any update i need to do to make this work properly??

    If some can help me?? My mac mail will not close when iam finished with it, or will it open when i awake my computer is there an update i need to do??

    As the message comes from AVG yo will need to read about AVG to stop those alerts.
    If you think there is a genuine problem with firefox
    * see [[high memory usage]] <-- clickable link -- <br/> that contains some tips and information about memory usage
    * go to ''about:memory'' by keying that into the location bar <br/> the report that is generated may be of help - it gives tooltip info on mouseover of items, and has a button that tries to reduce memory usage

  • Accidently deleted photos from my iphone 5c, not using the cloud, is there any way to get my pics back?

    Just got a new iphone 5c and have not activated the cloud. Took pictures Saturday night and copied them to a separate file. Went to the camera roll and deleted them,not knowing that also deletes the file i created.  I have no backup or anything. Is there anyway that I can recover these pics?

    No.

  • Is there any procedure to get the memory warning levels using objective C

    I want know the different levels of memory warnings programmatically using objective C.Is there any procedure to get that.

    AmirTs wrote:
    my device connects to my server and need to authenticate with a unique number
    and i need access to the number to add it in the server.

  • Is there any way to forse user to put at least 5 characters when using LOV?

    Hi gurus,
    I have a question.
    Is there any way to force user to put at least 5 characters when using LOV?
    I want user to put at least 4 characters before/when using LOV.
    Is there any way to do that?
    Thank you for your answers.
    Nerijus

    Hello,
    i've tested it both on 6i and 10g and also set the lov name at runtime.
    All i can say is, it does what it is supposed to do.
    So you should give it one more try:
    - leave the item properties NULL ( LOV name ) and NO ( Validate_From_List )
    - add following code in the WVI - Trigger
    IF :AUFTRAG_NEU.PN IS NOT NULL AND LENGTH ( :AUFTRAG_NEU.PN ) < 5 THEN
      Show_Message ( 'Bitte 5 Zeichen eingeben' );
      RAISE FORM_TRIGGER_FAILURE;
    ELSIF :AUFTRAG_NEU.PN IS NULL THEN
      NULL;
    ELSE
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, 'LOV_PN_PROJEKT' );
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_TRUE );
      IF SHOW_LOV THEN
        NULL;
      END IF;
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', VALIDATE_FROM_LIST, PROPERTY_FALSE );
      SET_ITEM_PROPERTY ( 'AUFTRAG_NEU.PN', LOV_NAME, '' );By the way, what exactly doesn't work?
    Bernd

Maybe you are looking for

  • APEX_APPLICATION.g_f01  not grabbing values

    Hi, Have the following problem with APEX_APPLICATION.g_f01 I created a region with the following code: SELECT apex_item.text(1, CART_DETAIL#) as CART_DETAIL#ForCart, apex_item.text(2, SEQ, 1) as "#" FROM The item is displayed on the screen and change

  • Using clobs and ORA-01704: string literal too long

    Hi, I am attempting to add oracle support to an existing J2ee application. The issue I am facing is the use of CLOB datatypes and the 4k string literal limitation that Oracle has. I have dowloaded the 10.2.0.3 thin driver and am connected to a 9i rel

  • Issues with using webcam in Flash Windows 8.1

    Hi there Anyone else experiencing this and can help? I have recently upgraded to Windows 8.1 and ever since then I cannot get Flash Player to display my webcam on various chat sites and realtime messaging tools. All i end up with is a white pane wher

  • How can we do unit test plan

    hi experts can u help me plz

  • One instance of a component in two TabNavigator children

    Hello, I currently use a TabNavigator composed of two tabs in which I have two instances of the same component and I was wondering if it were possible to have a unique instance in those two tabs. Let's suppose that I have a TextInput in the tab `A' o