Using PSA 2.0 with PSA SE 3.0

So I already own PhotoShop Album 2.0 and PhotoShop Elements 2.0...
We have also bought a new digital camera that works quite well... and we've taken over 700 photos in the last 6 months.
(side note: Never let Windows Photo downloader copy photos from camera to disk, it strips the date!... I just copy the photos from the camera to hard drive since Win XP considers the camera connected to a USB is just another drive)
I also have decided to incorporated scanned photos from an old attempt at Web based Christmas card (back when it was an "@home.com" address). So when the PSA 2.0 pulled them in, there lots of duplicate pictures that looked the same, but I needed to right click the mouse to bring up "properties" to see which was the thumbnail file and which was the larger full sized photo.
BUT... I noticed that PSA SE 3.0 does show the picture (smaller) WITH the file name under it! And all I have to do is float the mouse over the file name to get the full path (Shared Documents/Shared Pictures... etc.jpg).
BUT... I cannot move files (except delete duplicates), nor can I copy to a CD or DVD... which PSA 2.0 fully paid for does (oh, and PSA 2.0 did a great job of burning DVD's when my then "new" laptop's DVD software failed... that has since been fixed by buying decent burning software with added functionality).
But all is not lost... (sorry I don't quite feel like buying PSE 4.0 just yet). The PSA 2.0 can read the PSA SE 3.0 catalog file! Woo Hoo!
So I can pull in all the pictures I've been meaning to organize... and this includes scanning some more very old slides and snapshots. Have PSA SE 3.0 organize, re-date and tag --- then burning picture CD's with PSA 2.0 (which can also edit the pictures by pulling in PSE 2.0, needed to get dust marks and scratches off scanned slides).

I must apologise to everyone who has bothered to read about my problems, especially Colin -thanks. When checking again (properly) I realised that I had indeed renamed the files names in PASE3 and they were not initially shown in PA2. On starting PA2 next day the file names were all correct. I know they disapear if the thumbnails are too small, but I had tried larger sizes. I can only assume (v. dangerous!) that it took the PC to reboot for the file names to show? Anyway, I am now well pleased with Album 2. I'll probably burn a copy of the photos - just in case..............
Happy New Year to everyone
Albert

Similar Messages

  • Can an external editor be used with PSA 3 SE?

    I have reviewed the PDF download for Getting Started with PSA 3 SE and see no mention of an External Editor interface. However, I think this function would be very beneficial for people who have Photoshop Elements 2 and want to try PS Album.
    Therefore, I am explicitly asking if PS Elements 2 can be used as an External Editor with PSA 3 SE?
    Barb O

    Nandan,
    Thanks for your answer and I guess Adobe made a marketing decision not to provide the External Editor interface in the Starter Edition.
    >May I suggest, its better to move to PSE3 which has all of SE and PSE2 and much much more.
    Yes, I agree that a move to PSE 3 makes sense for some people and brings Adobe more revenue.
    However, Adobe also makes revenue from those PSE 2 copies that people have purchased retail or received with their scanners or cameras. Adobe chose to offer an upgrade price to Elements 3 for only a short time.
    Why should people not get a good experience with PSA 3 SE having an interface to PSE 2 from which Adobe has earned revenue?
    Barb O

  • Using PSA 3 SE with Photoshop CS2 or PSE2

    I have PSE2 and the full monty Photoshop CS2. As I want to create slideshows with my own background musice, transitions, etc I downloaded PSA 3SE hoping that this was the software I needed. However, in its Read Me First file it says that in order to use the full functionality for slide shows (music, transitions, etc) I need to upgrade to PSE2. But I already have that, and CS", installed but I cannot seem to integrate them with PSA 3 SE.
    Any tips on what I need to do would be much appreciated. Adobe won't give me any email help/advice and I refuse to pay them $39 for a call that may not even help me!

    It says upgrade to PSE 3, which includes Organizer, which is the highest functionality version of the PSA technology.
    Having said that, none of these programs do a great job of slideshows.
    My suggestion is go buy a "real" slideshow program. There are lots available. I like the product at http://www.wnsoft.com ProShow Gold is well thought of.

  • Transfer method 'TRFC with PSA' is not supported by the source system.

    Hi guys
    We are getting the following error when we try to open the transfer rules:
    Transfer method 'TRFC with PSA' is not supported by the source system.
    And when we run the load we are getting this error message:
    An RFC call-up triggered the exception
    Our source system check is ok. RFC test is ok from both sides.
    Please advice what else can be the solution.
    Edited by: sam on Nov 6, 2008 4:51 PM

    Did you do Right click on Source system and 'Check' option in RSA1-> Source Systems?
    Is this problem after upgrade or something like that?
    -Abhijit

  • Simple question: validate infocube data by comparing it with PSA data

    Hi all,
    I want to validate infocube data by comparing it with PSA data, for that i went through PSA via context menu. After that i generated export datasource. Then i am not able to find PSA Export datasource? where can i find that..
    Thanks
    raju

    Hi all,
    I´ve tryied to VALIDATE INFOCUBE DATA BY COMPARING IT WITH PSA DATA making the step by step contained in the HOW TO ...
    The problem is that I have the following error when i activate the transfer rules after aggregating the infoobjet 0TCTREQUID and don´t know how to resolve it:
    " IDoc segment /BIC/CICA7ZBW_RECEP_DI could not be assigned to IDoc ZSCA002
    Message no. RSAR240
    Diagnosis
    The transfer structure is assigned to IDoc ZSCA002 as an IDoc segment for the data transfer between source system and Business Information Warehouse.
    This assignment failed.
    System response
    IDoc segment /BIC/CICA7ZBW_RECEP_DI not known to IDoc V2&. Therefore, no data import can take place from the source system for this InfoSource."
    Any idea of what could have happend?
    Thanks in advance,
    Diego

  • Problem with PSA deletion

    Hi All,
    My requirement is to delete all PSA requests everyday before daily loads. For this i have created a PC with PSA deletion variant with the followng settings - data-source = 0CO_PC_02, source system = *, older than = 0 days, all requests (red and green). When the variant is run no requests are deleted, even if there are requests meeting the above conditions. Logs of the variant do not show any requests.  When i delete the requests manually from the Data-Source overview screen the requests are deleted but i can still see the request in the PSA table (se16). What could be the reason. The scenario works fine for other data-sources and variants with identical settings. Thanks.
    Regards,
    Saurabh Diwakar

    Hi,
    Please specify only these three things nothing else . This should do the job for you .
    Data Source name
    exact Name of the Source System with client Name
    In older than put 0.
    -Vikram

  • ,difference between PSA 3.5 and PSA BI-7

    Hi,
    Please some one  tell me the difference between PSA 3.5 and PSA BI-7 , Actually i searched in the forum also but i didn't get difference but i could find the other Datasorce .... etc differences.
    Thanks,
    GAL
    Edited by: GAL BI on Feb 5, 2009 8:45 PM

    Hi,
    There is no difference technically as it still remains the flat table structure as it was in 3.5
    The kind of partitions and way it was organised in the system is still the same.
    Its just that the way it is used now has been changed from 3.5 and again I will give you the same answer of data source.
    Now it has been made mandatory to load the data from R/3 first to PSA and then further to the targets.
    This PSA has no difference from the PSA in the 3.5 as the deifintion persistence staging area can be given to any table which stores the data in as it is form....and in 7.0 they are doing the same role which they were doing in 3.5 that is storing data as it is.
    Now the PSA has become data source specific and not target specific as it was in 3.5.
    now the data source in 7.0 are having the PSA  and will come into play only when the object will be used as data source for futher updates whereas in 3.5 it was more like a  target which use to have a kind of  PSA attached to it since the PSA used to have a structure same as transfer structure which was possible to change.
    Hope I am clear.
    Thanks
    Ajeet

  • How do I use Edge Web Fonts with Muse?

    How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

    Hello,
    Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
    Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
    Select a text component within Muse, and click the Text drop-down.
    Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
    Browse and apply fonts per your design needs.
    Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
    Also take a look at these help files to see if they help you:
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
    http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
    Hope this helps!
    Regards,
    Suhas Yogin

  • How do I use an external mic with the iPad4?

    How do I connect an external mic to the new iPad4? Older models seem to have worked, but the lightning connector causes a lot of problems. I would like to use my Zoom H1 with my iPad4 and GarageBand. Any ideas? Thanks so much!

    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • How do i use my mac book with my HP 6510 e all in one series printer

    how do i use my mac book with HP photosmart 6510 e all in one series

    Hello Marilynatsea,
    Thanks for using Apple Support Communities.
    To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
    Mac Basics: Printing in OS X - Apple Support
    Cheers,
    Alex H.

  • How do I use my gigaware webcam with my mac?

    How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

    Your amazon link states, in part, that this webcam is:
    Compatible with Microsoft Windows 7,Vista, XP, 2000
    Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
    For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

  • How do I use a foot pedal with my mac?

    how do I use a foot pedal with my mac to use on YouTube?

    Can you be more specific? What kind of foot pedal? What is the foot pedal used for?

  • How do i use a new computer with my ipod?

    how do i use a new computer with my ipod?

    See this apple support communities user tip…
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • How do I use cell number associated with iPad 2 3G

    How do I use cell number associated with iPad 2 3G

    For Messages you can can use your email address, the iPad doesn't have a phone number that you can use.

Maybe you are looking for

  • HP5850 printer driver for microsoft 8.1

    This printer is the best I have  had and I want to use on my new Laptop with Microsoft 8.1. No driver available. Is there a way of downloading a driver to allow me to use my 5850....or do I have yo buy another printer (which will NOT be an HP model)

  • Multiprovider for different set of data

    Hi Experts, I need to built multiprovider on top of two InfoCubes. But tricky part here is one Infocube contains data at line item level and second Infocube contains data at summary level. I will get most of the keyfigures from one Infocube and one k

  • Workflow Worked only for a While

    Hi Experts, I have created a workflow and attached it to a phase . The workflow worked fine ,triggered mail to approver etc,but after a while , when I tested again ,the workflow engine was not triggering mail for approver's I have added .But system i

  • Caller ID not displaying correctly on some call recipients' phones

    This isn't necessarily an iPhone issue - a similar issue appears on other boards.  But I haven't seen an answer that will help me, so here goes: My wife and I share a VZW account.  She has the iPhone, and today she found out that when she makes a cal

  • C7289 All in one- wireless printing not working

    It looks like all connected for wireless printing, however, nohing will print! Please help