Using PXI Star line for Sample CLK with 6551.

Using PXI Star line for Sample CLK with 6551.
Im trying to clock 5 6551s in a PXI-1006 chassis and a5404 in slot 2. I have configured the 6551s to use the start line as the sample clock but I still get the error
Possible reason(s):
Driver Status: (Hex 0xBFFA49B5) DAQmx Error -200586 occurred:
Hardware clocking error occurred.
If you are using an external sample clock, make sure it is connected and within specifications. If you are generating your sample clock internally, please contact National Instruments Technical Support.
Device: PXI2Slot17
Status Code: -200586
Any ideas why?
Thanks,
Brian

Nevermind...problem solved. I was exporting the wrong signal to the star line.
Brian
Message Edited by BrianPack on 11-28-2005 12:07 PM

Similar Messages

How to use PXI Star Trigger for PXIe-5663 in PXIe-1075 chassis

HI all,
I have this sytem configuration:
PXIe-8135 controller. Windows 7 64-bit, RFSA 2.7.5. NI-SYNC 3.4.1
PXIe-1075 chassis
PXIe-5663 (2x)
PXIe-6672 Timing & Sync Card (slot #10)
I want to trigger the recording of my Digitizer with an external trigger.
The External Trigger is connected to PFI0 of the PXIe-6672 Timing card.
Then, the PXIE-6672 card routes the trigger to the backplane of the PXIe-1072 (Destination "NISYNC_VAL_PXITRIG0")
The PXIe-5663 are triggered with “NIRFSA_VAL_PXI_TRIG0_STR” as the source.
The trigger fires my PXIe-5663 correctly, but the timing is not tight (> 5ns).
I would like to use the PXI Star trigger instead, I think that I should be able to acheive much better synchronization with this.
But NI-RFSA won't let me do this:
When I try to call
"niRFSA_ConfigureDigitalEdgeStartTrigger(rfsa_session, NIRFSA_VAL_PXI_STAR_STR , NIRFSA_VAL_RISING_EDGE)", I get the error:
"Specified Route Cannot Be Satisfied, Because the Hardware Does Not Support It"
I don't understand why the PXIe-5663E would not be able to use that Route.
Any idea?
Regards,
Serge
Serge Malo, ing.
Concepteur logiciel
Software Developer
T (514) 842-7577 x648 | [email protected]

That explanation isn't quite right. Usually, even PXIe modules have a connection to PXI_Star. The PXIe standard added the PXIe_DStar trigger buses, and it also preserved the PXI_Star bus from the PXI standard.
However, there is an additional twist in this situation. I'm assuming that your PXIe-5663 includes a PXIe-5622 as the digitizer. It turns out that a synchronization technique called NI-TClk has eliminated the need for our more recent digitizers to rely on triggering from PXI_Star. I was able to find some documentation that includes this information, here and here. Given that, I think you have two options that should result in better synchronization.
The first option is to use TClk; I found an example program that demonstrates using TClk to acheive phase coherent signal acquisition across two 5663s. The second option is to use cables of matched length to connect two PFI front panel terminals of the timing board (6672) to the PFI1 front panel terminals of the digitizers (5622). The timing board would accept the external trigger on PFI0 and then issue triggers on PFI1 and PFI2 with around 500 ps of skew (manual, page A-4) . The digitizers would use NIRFSA_VAL_PFI1_STR as the trigger. I hope one of these solutions will meet the demands of your particular application.
I will also follow up with the owners of the RFSA product documentation to see if we can include a note about why PXI_Star is not supported in some cases.
James Blair
NI R&D

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I use srvctl command line for change "Failover type" and "F method"

Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.

user10674190 wrote:
Hi all,
I am using Oracle One Node (11.2.0.3), and I have a service:
/u01/11.2.0/grid/bin/srvctl config service -d orcl
Service name: orcldb
Service is enabled
Server pool: orcl
Cardinality: 1
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: false
Failover type: NONE
Failover method: NONE
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: orcl_1
Available instances:
I would like to change "Failover type" and "Failover method" to:
Failover type: SELECT
Failover method: BASIC
How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
Thanks in advance.
Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
Also see
11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

Looking for sample template with the check on the bottom of the page

Customer is looking for sample template with the check on the bottom of the page, anyone know of one? Their Bank doesn't like the check on the top of the page because when you rip the check from the stub is sometimes rips the microline. -Thanks

Hi Dale,
Check this one(template attached) : http://blogs.oracle.com/xmlpublisher/2006/04/13/#a12
You just need to flip the invoice and check position,..
regards..

Using a 2nd Computer for Sample Playback

After a few recent projects started to choke on all the Kontakt3 instruments I was using, I'm thinking about getting a 2nd computer just to run more sampled sounds.
Anybody have any experiences/tips to report? Should I get a 2nd mac (iMac? Mini?) or a cheap PC?
Should I just route the audio normally, or use Ethernet (or something else) for machine-to-machine communication?
Or is there a way to get better performance on one computer by using Kontakt in 'standalone' mode and somehow routing it back into Logic?
Interested in other users' solutions to this situation. I've already got plenty of RAM and drive space, and I know my way around Kontakts DFD settings. But I used to use an old PC for Gigastudio, and now I'm thinking it's time to try a similar setup. What's the preferred method these days?

I know many people use the free app "Soundflower" to use Software instruments like Kontakt as a stand alone, and pump it back into Logic.
The main benefit here is it will use RAM Logic does not. So if you have a lot of RAM in your computer, you can access more of it this way (for software instruments, I mean).
There is a very detailed post over at Sonikmatter on how to do this
http://community.sonikmatter.com/forums/index.php?showtopic=37541&st=0
Jay Asher also covers this in his new book "Going Pro with Logic Pro 8"
http://www.amazon.com/Going-Pro-Logic-8/dp/1598635611/ref=sr13?ie=UTF8&qid=1228615232&sr=1-3

How do I set up a ringmaster on my fax 2140 so that I can use the same line for phone

I have the HP 2140 Fax Machine and have always had a separate line for the fax. Now, I have only one line which is
to be used for both the telepone and my fax machine. This will save me approx. $200 per year.

cannot get my fax machine to except the drpd distintive ring. went to change the print cartg. and screwed something up? Can you help?

Can I setup my Browser to use my DSL line for downloads and T1 line for uploading

Hi,
i would like to setup my browser to use my DSL internet connection to open my emails from google and when i am sending it to use my T1 line. Please let me know if its even possible in a browser.
Thanks

The Operating System is what controls the incoming and outgoing connections, so that is really a Windows support issue.
The only thing that I can think of is to ask in one of the Satellite forums over here, for some ideas on how you might accomplish that:
http://www.dslreports.com/forum/
Satellite internet works similar to that, the download comes by Satellite, and the upload goes out by dial-up or other land connection.

Using several xib files for my app with IB

Hello!
I have big problems using and understanding xibs/nibs in combination with IB. I have my MainWindow.xib and set the color of my window to red - what works. If I start my app, the window is red. good.
[window setBackgroundColor:[UIColor redColor]];
No, it gets complicated..
I have added a second xib and named it ReadGroupsTableViewController.xib. I want this xib to "use" my class:
ReadGroupsTableViewController.m
ReadGroupsTableViewController.h
which should return a cell with the name "hello". Therefore, i am setting
cell.textLabel.text = @"hello";
in the method
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
and returning 1 for the value of numbers in row.
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView {
return 1;
In my appDelegate Class, i am doing this:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
readGroupsTableViewController = [[UITableViewController alloc] initWithNibName:@"ReadGroupsTableViewController" bundle:[NSBundle mainBundle]];
[window setBackgroundColor:[UIColor redColor]];
[window addSubview:readGroupsTableViewController.view];
[window makeKeyAndVisible];
Now, in the ReadGroupsTableViewController.xib i am adding a UITableViewController Item. In the identy tab, I am setting the class of the controller to my ReadGroupsTableViewController. The delegates and the datasource are set to the view (automatically)
2009-10-20 11:48:54.949 MapPrototype[80812:207] * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '-[UIViewController _loadViewFromNibNamed:bundle:] loaded the "ReadGroupsTableViewController" nib but the view outlet was not set.'
any help is appreciated..

It is hard to say where a memory issue occurred. Normally usage of a memory profiler such as JRockit JRA, or JProfiler is useful in debugging such issues.
There were a couple related memory issues in previous releases, so ensure you have the latest release or patch release.
Using an isolated (shared=false) or weak cache may also help.
In general you should be able to scale to 5000 users without any issues.
James : http://www.eclipselink.org

I work in an area where we use T one lines for internet. I do have an iphone and am able to get on the internet on it. Will I be able to get on the internet with an IPAD 3 that I have recently purchased.

I work in a company that has only t one connection for internet. There is no interet srvice provided in this area. I do however have and Iphone three and have no trouble getting on the internet with it. Will it be the same for the IPAD 3 that I just purchased?? Want to be able to use the IPAD 3 at work and get on the interent and if I can on the Iphone 3 I'm hoping the IPAD 3 will also. Any thoughts?

Either your phone is getting on wifi or you're using the cellular network to access the internet. If it's wifi, then you just need to connect the iPad to the same wifi. If you're using the phone's cellular connection to access the net, then you'll either need to get a tethering plan to use your phone as a mobile hotspot for your iPad, or get a device like the Mifi, which is a portable cellular wifi hotspot

Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
I need to have a relative path to my download directory with respect to the profile folder.
Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

That is not a practically empty xinitrc - that file only needs one line: exec WM. Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
Is slim involved? Probably. That is the source of many problems. But to start narrowing this down, I have 3 suggestions:
1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
2) at a tty in runlevel 3 use "xinit" instead of "startx". Startx is fine most of the time, but it is essentially just a complex wrapper for xinit. That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult. So for now just use a vanilla 'xinit'.
3) remove dbus-launch from your exec line in xinitrc. This is done by console-kit so it is redundant and potentially problematic. Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them. Just make that line "exec openbox-session"
Edit: adding one more:
4) temporarily switch out openbox-session for openbox. I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
Last edited by Trilby (2012-10-03 17:30:36)

Using Flex Performance Profiler for Profiling Flex with Java Applications

Hi , I am planning to use Flex Profiler to profile my Application .
I have developed a sample Application using Flex MXML ,some ActionScript classes for Events and Cairngorm , Java , Oracle as database and Blazeds .
Can i use Flex Performance Profiler to Profile my Application . ?? I am asking this question as i ad read the below line from Adobe site and My Application includes java Methods
"You can use the profiler to profile ActionScript 3.0 applications " Can anybody please tell me What does this mean ?? and can i use the Flex Performnace Profiler . Please suggets me .

Thanks Karl for the prompt response .
I am making a call to a Java Method from my Action Script function , or getting data from Java Method into the ActionScript function .
So my question is , will the Flex Profiler will be applicable in this case as it internally calls Java Methods .

Please tell me you can use pan/zoom tool for photo slideshow with photos not cropped to screen?

I'm new to Mac and Premiere Elements (former PC/Sony Vegas Movie user), and am trying to do a Ken Burns type photo slideshow wherein my photos are left in their normal cropped state. Right now it seems all photos get cropped to fill the screen size (i.e. 16:9). I saw where you could uncheck the scale photo size to media (or something to that effect) under the general setting in preferences, but using the pan/zool tool still shows photos cropped to fill screen. I realize conflicting aspect ratio will result in black bars top/bottom or left/right of frame, and that's ok/what I want. I'm hoping this is doable? Thanks, Jim

jimdrought
The primary question that I have is what is the end product...DVD-VIDEO Standard on DVD disc, DVD-VIDEO Widescreen on DVD disc or other?
Let us assume for now DVD-VIDEO Widescreen on DVD disc. The next question that falls into line is the one relating to what you describe as an assortment of photos going into this project...what are the pixel dimensions (what range of...) and aspect ratio. For aspect ratio, are we talking 4:3 or 16:9. How many of these photos are landscape oriented or how many portrait oriented.
In generalities at this point, I would ask you to look at:
a. bringing your photos appropriately sized into a Premiere Elements project with an appropriate project preset.
b. leaving Edit Menu/Preferences/General with its Default Scale to Frame Size with a check mark.
c. in the workspace, scaling the photos to just fill the space in the Edit Mode Monitor
d. then one by one pan and zoom a photo with the Pan and Zoom Tool.
If you use this Tool, you should get good results. One consideration is that the process results in the Timeline photo having a much larger duration AFTER than BEFORE. If you see any pros in using this tool for your purposes, then you might want to explore the technique that I described for applying a pan and zoom effect from this Tool to more than one photo at a time.
http://www.atr935.blogspot.com/2013/05/pe11-pan-zoom-tool-more-than-one-photo.html
You also might want to explore fxEffects/Presets for horizontal and vertical pans or zoom. The catch in the presets is that you can apply a pan OR zoom, not a pan AND zoom to each photo.
Keyframing of Scale (for Zoom) and Position (for Pan) should be explored under Applied Effects/Applied Effects Palette/Motion Panel expanded/Scale and Position properties.
With more details from you, we could go step by step in any of the above.
We will be watching for your progress.
Thanks.
ATR

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Using PXI Star line for Sample CLK with 6551.

Similar Messages

Maybe you are looking for