Using QT_WriteOBJECT_XHTML in an iframe
Has anyone had any luck doing this? I'm trying to launch the quicktime player. It works fine, but when I put the page in an iframe, I end up with a blank space where the buttons are. I have no clue what's causing this. If anyone can help that would be great.
>>
is it possible to have subportfolio-2.htm show up in the same
iframe as subportfolio-1.htm?
>>
AFAIK, this is the default "behaviour" anyway
Similar Messages
-
Non-Rectangular JFrames using JNA or IBM IFrame
Hi,
I want to make a non-rectangular frame with round-shaped edges. I searched through this forum. But still unsuccessful. I can even go for a platform dependent solution. But i don't want to use Robot class which is taking screen-captures at interval or at system-events. This approach is very slower and faulty. Is anybody having experience in using JNA or IBM IFrame libraries (or any other approach) for this purpose?
Thanks in advance,
Sunil -
Some features/options needed when using mobileme gallery in iframe
hi@all
i have built this iweb site and embedded my mobilemegallery like this:
<iframe width="1280" height="900
" frameborder="0" src="http://gallery.me.com/friereida#100008&view=mosaic&sel=0" more attributes>
</iframe>
so what i need is:
how can i access more attributes so that the option button on the right upper corner is disabled or if this is not working i want just that the options are disabled but you can enable it with the button, but default=disabled.
as you can see my default view is mosaic!
when i leave the current album and go to another one on my mobileme gallery the default view is Raster how can i handle this that my default view is always mosaic in all of my public gallerys?
thanks a lot for your help
pgepplCyclosaurus is the top javascript person in this forum. He's posted many tips and solutions using advanced javascript in HTML snippets. Most, no nearly all of his stuff is over my head and I just copy, use and recommend. Find one of his posts and ask him to view this thread and if he might have a the solution you're looking for.
A possible alternative is to use an iPhoto MobileMe gallery and embed that in your web site. You can select any of the gallery modes to be the mode you link to, grid, mosaic, carousel or slideshow. My example is linked to the mosaic mode. You also can isolate that gallery from any others that you might have so that visitors can only view that particular gallery. Changing the content of that gallery would be done thru iPhoto.
OT -
Internet Explorer hangs when using CrystalReportViewer in an IFRAME
Post Author: ME-DSZ
CA Forum: .NET
I'm using Crystal Reports 2008 Service Pack 0
Create an aspx page (CRViewer.aspx) with one CrystalReportViewer that shows a report. E. g.:
<body><form id="form1" runat="server"><div style="height: 100%;"><CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="True"GroupTreeImagesFolderUrl="" ReportSourceID="CrystalReportSource1" ToolbarImagesFolderUrl=""ToolPanelWidth="200px" Width="100%" Height="100%" BestFitPage="False" /><CR:CrystalReportSource ID="CrystalReportSource1" runat="server"><Report FileName="Report.rpt"></Report></CR:CrystalReportSource></div></form></body>
If you test this page all the functionality of the cr-viewer works fine.
Then i tried to show this page in a second page in an iframe element: E. g.:
<body><form id="form1" runat="server"><div><p>some other stuff</p></div><div id="divWrapper"> <iframe id="ifReport" runat="server" height="300px" width="100%" src="CRViewer.aspx"></iframe></div></form></body>
If you click any button on the CrystalReportViewer Toolbox Internet Explorer 7 hangs with 100 % CPU. Firefox shows an error:
Unable to process your request
I tested this with buildin Webserver of Visual Studio 2008 and hosted in IIS (7.0).
After some experimenting and javascript debugging i think i found the reason. This behaviour happens only if you set the width of CrystalReportViewer to 100% (only in the iframe scenario).
This is causing in "allInOne.js" an infinite loop (in function -> signal: function(src, sig))...)Post Author: ME-DSZ
CA Forum: .NET
BO where are you??? -
Problem using Portals on an iframe
Hello all,
I got to work out my portal inside an iframe using the nested_window parameter. But now I got the following issue. I´m using a custom theme and every time a look the portal in a normal browser all my styles look fine, but when I take a look in my other portal with the iframe it takes some of my style mixed with the default theme of the portal (SAP tradeshow).
I don´t know if this is a bug or I´m skiping something because I am using the iframe, the theme and SAP portals for anonymous users,
Any tip would be appreciated
Regards,
Orlando CovaultIt was a problem on the order of portal desktops in main_rules
-
Using mouse to position iframes, flash components?
I am new to website designing and I used to use Frontpage...
In front page I used to be able to create a blank Iframe and drag a
flash component into that Iframe and then drag and drop it
(position it) wherever I'd like.
In dreamweaver I can't drag and drop. It seems as if it is
locked in position for some reason. Is there a way where I can just
absolutely position the flash component wherever I'd like by
dragging and dropping it with the mouse? Any help would be
appreciated it.If you are coming into DW from FP you need to know this:
without learning
some HTML and CSS, DW will be a very tough experience for
you. And
definitely know that DW is not designed to be freindly to the
drag and drop
crowd. Are you sure it's the right application for you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"alee12321" <[email protected]> wrote in
message
news:gddt0m$4fj$[email protected]..
>I am new to website designing and I used to use
Frontpage... In front page
>I
> used to be able to create a blank Iframe and drag a
flash component into
> that
> Iframe and then drag and drop it (position it) wherever
I'd like.
>
> In dreamweaver I can't drag and drop. It seems as if it
is locked in
> position
> for some reason. Is there a way where I can just
absolutely position the
> flash
> component wherever I'd like by dragging and dropping it
with the mouse?
> Any
> help would be appreciated it.
> -
Should I use an iframe here?
I'm pretty new at this and have made a website using
Photoshop and Image Ready and also have a few flash files on an
HTML page in Dreamweaver MX. I have added a music player at the
bottom of the page, which is made in Swish Jukebox and I want the
music to play throughout the website. What I didn't think of when I
created the site was that the music will start from the beginning
again when you click onto other pages in the menu. As it's only the
middle of the page that changes I was wondering how to do this and
if creating an iframe in the middle of the page would be the
solution as everything else stays the same on the page....if so,
how do I create an iframe and how would I link the button images on
the page to the iframe and it's different content? You can see what
I mean here:
www.soundwave-studio.com
It's just the flash file in the middle of the page that
changes on the pages so if I could have everything on one HTML page
and just alter the middle information and link each menu button to
the different middle information that'd be the solution to my
problem, but I don't know how to go about it.
Thanks beforehand!
JenYou certainly could use a frame or iframe, but then you're
stuck with the problems of a frame site. I prefer sites that have a
seperate popup for a music player, if music need to play for the
entire experience. I also prefer sites that give me the option to
start the music, rather than forcing me to find the off button.
Another suggestion, lose the pulsating speakers, moving text,
and the moving banner (exept possibly a single pass on the home
page). These effects don't do anything exept draw the users
attention away from the content. They are very distracting and I
found the content difficult to read with all of the
distractions. -
Crystal Report in an iFrame redirect problem
Hi!
I have built a page with a only Crystal Report on it, which I display in an iFrame on another page.
I have a hyperlink on the page that is used to redirect the iFrame by assigning the iFrame a name and setting the target of the hyperlink to the iFrame. When the user clicks the hyperlink, it will redirect the iFrame.
This all works fine up until the point at which you generate the actual Crystal report. After the report has generated, attempting to redirect the iFrame via the hyperlink causes a new browser tab/window to open. A few tests that I have run using Javascript or codebehind circumvent this issue, but as it stands I cannot use this method.
This issue has only just arisen with the VS2010 version of Crystal Reports. The older versions do not have this problem.
Research I have done into the issue have been fruitless and have tinkered with the Report Viewer itself a bit to no avail.
Is there an explanation for this issue and/or a means of getting past this?
Any help or nudge in a new direction is very much appreciated!
Regards,
Frank.Hello Frank:
This issue has been reported to R&D for a fix (ADAPT01554950). At this time, the fix is targeted (not guaranteed) for Service Pack 3. ETA; mid 2012.
For a possible work-around, see the following thread:
Crystal Reports Viewer VS2010 FRAME target issue
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Nov 28, 2011 7:48 AM -
Adding a Lightroom Gallery on an iweb site- that does NOT use .mac
I've been checking all past posts but only find references to adding a Lightroom Gallery in iweb if the user has mobile me/uses a .mac account. Someone else has asked this same question on July 20 and received no answers so far. Both of us using iweb '08. I've also gone the other direction but all Lightroom answers also refer to .mac accounts.
I've tried following the methods in past posts using html snippets and iframes but they don't seem to be a perfect fit without the .mac account. Anyone have any advice here? Many thanks.I tested and it worked fine for me....
I went through Yahoo steps and had code generated...
Went to iWeb and on page I wanted to add chart, I clicked on the "Web Widgets" icon at bottom of iWeb page and picked "HTML Snippet" and then pasted code in area provided (where it says paste code), finally I hit "Apply" saved my pages and published. Worked fine.
Hope this helps you. -
Iframe shows only code - Help, please!
I'm on OS X 10.4.5 and have designed a website that uses iframes (this is a must as there is a lot of content and I do not want the page bigger than the set size, so I need a way to scroll the content within the page size (955x600). I use Firefox for myself (and it looks great) but the person I'm doing the site for uses Safari. When he sees it, needless to say, it isn't going to look right. All it's displaying is the code for the iframe page as if I'm viewing the source for the page (within the iframe on the main page). Have they fixed the problem with iframes in Safari? And if so, what do I need to make it work in both browsers? Or is there another design tactic I can use instead of iframes?
Any help or suggestions are very appreciated.
Thanks!
Mac mini Mac OS X (10.4.5)I actually found my error. It wasn't code within the file but I had saved it as a .php file (based on a file I found at another website that used it for their iframe) and when I changed it to .html it worked! But thanks, again, for your advice because it caused me to research iframes and I found they were all using .html/.htm files to call on.
-
Attach_file_to_response kills iframe content
Hello,
I have a WDA application using an iframe. I fill the iframe by using an object of if_http_response and add this object to the server cache: cl_http_server=>server_cache_upload. This works perfectly fine.
I added a button in order to save the content of the iframe localy to the hard drive.
The problem is when I try to use cl_wd_runtime_services=>attach_file_to_response the iframe shows (right after the save dialog shows up):
>Action canceled
>Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
The url which I use for the iframe source is still working and the content is still in the server cache avaiable.
I would re-build the iframe but I don't get any trigger like the wd_modify or so after I called cl_wd_runtime_services=>attach_file_to_response.
Any help is appreciated and there is no way to replace the iframe. This is not an option.
Regards,
ChristophHi,
How did you convert the table of Hexadecimel values to Xstring??
I am also facing the same problem as my requirement is same as you.
The i_content in attach_file_to_response method is a structure and i am getting the values in a table (Hexadecimal Values). I tried with looping the Hexadecimal table into a structure. After executing it gives the error as "The file is corrupted and it cant be opened".
Can you help me with this.
Thanks in advance.
Regards,
Sankar -
Hi everyone,
I've developed a WD ABAP application which renders 2 iFrames. If I take a look at the source code that is generated by the framework I can see the following snippet:
<iframe src=myhost:50000/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.WebDynpro?DefinitionType=ABAP&System=Probuyer_101&WebDynproApplication=ZWD_APP&ClientType=auto&WebDynproNamespace=SAP&ApplicationParameter=sap-wd-configId%3DZWD_AC&DynamicParameter=action%3Dgo%26sap-config-mode%3Dtrue%26FPM_HIDE_CLOSE%3DX%26EBELN%3D4500023643%26PO_ACTION%3DDISPLAY> </iframe>
<iframe src=myhost:50000/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.WebDynpro?DefinitionType=ABAP&System=Probuyer_101&WebDynproApplication=ZWD_APP&ClientType=auto&WebDynproNamespace=SAP&ApplicationParameter=sap-wd-configId%3DZWD_AC&DynamicParameter=action%3Dgo%26sap-config-mode%3Dtrue%26FPM_HIDE_CLOSE%3DX%26EBELN%3D4500023606%26PO_ACTION%3DMODIFY> </iframe>
Now this renders 2 iframes with same identical content.
How is it?
The first iframe points to the PO: EBELN=4500023643 in display mode
The second iframe points to the PO: EBELN=4500023606 in change mode but renders exactly the same content as the first item.
It seems to be a problem with Internet Explorer.
In firefox or chrome I cannot reproduce because my portal runs 7.30 which doesn't support those browsers.
Any help?A couple of comments. iFrames arenu2019t deprecated any longer as of NetWeaver 7.02. However you should never really running WDA or the Portal within an iFrame. The session management and rendering wonu2019t work correctly nor is this supported by SAP. You shouldnu2019t need to do this anyway. If you are in the Portal you should use two separate iViews within one Portal Page. If you need to inner WDA applications within a single WDA without the Portal, then you should use component usages, not iFrames. iFrames should only ever be used for integration of non-Web Dynpro content.
-
I want to use an external browser.
iframe does not appear because it knew that the new browser.
index.html
# IFrame {
height: 100%;
width: 100%;
border-top-width: 0;
border-bottom-width: 0;
border-left-width: 0;
border-right-width: 0;
border-top-style: none;
border-bottom-style: none;
border-left-style: none;
border-right-style: none;
margin-left: auto;
margin-right: auto;
<div data-role="content">
<iframe id="iFrame" src="http://www.domain.kr/index_sub.html" seamless> </ iframe>
</ Div>
</ Div>
index_iframe.html (in index.html iframe)
<a class="ui-link-inherit" target="_blank" rel="external" href="http://www.domain.com"> new browser </ a>
<a class="ui-link-inherit" target="_system" rel="external" href="http://www.domain.com"> new browser </ a>
<a class="ui-link-inherit" target="new" rel="external" href="http://www.domain.com"> new browser </ a>
<a class="ui-link-inherit" target="self" rel="external" href="http://www.domain.com"> new browser </ a>
I've been several tests, will open within app.
Finally, have set in config.xml.
<preference name="stay-in-webview" value="false" />
true, false've tried both.
iframe in the browser (index_iframe.html) in a new browser window (native browser) to open what should I do?Not really sure what the issue is. The code you've posted is broken up and fragmented.
You have a DIV ID'd as IFrame. That's not necessary because <iframe> is already a tag.
If you place:
<iframe src="[domain.com] or [localpage.html]"></iframe>
in your HTML where you want the frame, all you need in your CSS is
iframe {
width: value;
height: value;
border: value;
and so on to make it work with the content in your iframe'd page.
If there are other things you need it to do like display a certain portion of the page only, there are scripts and code to do that. -
ADF Tabe's Pagination link does not work when embedded in iframe
Hi experts,
When I embedded ADF table(with JSF) in iframe like below code, the pagination link does not work. Is it a known bug?
<iframe width=100% height=500 src="http://rst-act3ct2.us.oracle.com:8888/test/faces/modify.jspx" frameborder="0" scrolling="no"></iframe>
When I use <object> instead of <iframe>, the pagination works again. However, <object> could not be used in my project.
Any idea on it?
Thank you in advance.
Regards,
TonyHi,
if you are on JDeveloper 10.1.3 then chances are that the problem can be pointed back to the mismatch of HTML and JavaServer Faces. At least you should make sure you work with a recent JDeveloper 10.1.3 release
Frank -
Hi all,
I have been using iframes in my application and they are working fine. Now, my application's swf file is loaded into another flex application using swfloader and now iframes are giving error? can any body let me know what went wrong?
thanksIm sorry how do you mean in a "compltete" event handler,
could you show me an example ?
THanks
Maybe you are looking for
-
Unlike my other computers where I can change the printer setup ( color, black and white, paper type etc) I don't see that option on the iMac. Is it called somethng else? I want to retire my old computer but can't until I can print in color.
-
How do i get past black screen on startup (windows xp 32bit)
Hello, i am using an HP Pavillion a6119h OS windows xp 32bit. When i turn on my computer it will reach the blue startup screen, but after that screen is gone it goes blank and stays blank. I've tried F11 to do system recovery but it won't go to syste
-
Error on initialize_services.sh file in linux
Hi Everyone, Here I am facing some issue which is non understandable. I am using MDEX 6.4.0, Platform services 6.1.3, CAS 3.1.1 and Tools and Framework 3.1.1which all are released latestly. I created an application through deplyoment templated for ca
-
Mitgliederbereiche in Adobe Muse erstellen
Nabend zusammen, gibt es in Adobe Muse irgendwie die Möglichkeit (wie in CMS) einen Mitgliederbereich zu erstellen, der Passwortgeschützt ist? Meine Googlesuche blieb bisher erfolglos. Vielleicht hat ja jemand einen Tipp... Grüße und gute Nacht!
-
Creating outbound IDOC for EDI
HI All, I have to create an IDOC for EDI. Can anyone tell be the function module to create an IDOC for EDI. I know MASTER_IDOC_DESTRIBUTE, but it is only used for ALE. Can anyone help me in this. Thanks. Shweta