Using quick time videos (for web)

Hi guys,
In my project I am using quick time videos within director,
which work fine when it is published and play back in the
projector. However when I export for web, the videos don't play
back in the web browser. Is there something I am missing when
exporting?
Many thanks,
Rich

Yeah, I did upload them in their relative folder. They are
about 15MB each and 30 seconds long. I don't have a "dswmedia"
foler, what do I need to do with that? The error message I get
is...
"This application requires an Xtra (QuickTime) that either
does not exist or failed to initialize properly. Please make sure
the appropiate Xtras are in the Xtras folder"
Thanks!

Similar Messages

  • I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

    I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

    I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
    Compressor allows you to customize presets and save them and apply them to multiple files.  Although the interface may seem daunting, it's actually pretty simple.
    Even if you can edit the avi in fcp, it's not a good idea.  Liable to cause problems down the road. 

  • Trying to export a small video using Quick Time conversion

    Hi...i apologize if this is a stupid question...i'm still kind of new at FCP. I'm trying to export a small one and a half minute video into a Quicktime file that's less than 1 GB. I exported as a Quick Time movie and it came out to 2.6 GB. I tried compressing using Compressor that and it took over 2 hours so I canceled it. I then tried exporting using Quick Time conversion and it came out to 66 MB, which is more what i'd expect. Except that the picture was only in the upper left hand corner of the Quick time viewer...the rest was black. I tried adjusting the dimensions, etc. but it didn't work. Any idea why this is happening? Are there some standard settings I can use for this? The video is for the internet so I'm not too terribly concerned about the picture quality. Thanks.

    What format is your media, Easy Setup and what are your Sequence Settings?
    They should all match.
    When you export, do so using the following path: File > Export > Export to QuickTime.
    Make sure that "With Current Settings" and " Make Movie Self-Contained are selected.
    This will give you an independent movie that is not compressed and uses the same codec as your source material.
    Depending on how you want to deliver your movie will determine what happens at the next stage.
    Post some details about it.

  • When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    Does it always happen at the same time during the export?
    Can you play through the entire Sequence in FCE without any problems?
    What are your Sequence settings in FCE>
    Have you rendered fully prior to exporting?
    Which export settings did you use?
    -DH

  • Quick Time Pro for Windows

    I’ve got a digital camera which uses Quick Time (for Windows) to play back ‘movies’ I’ve recorded on it.
    If I upgrade to Quick Time Pro for Windows will I be able to convert and export the Quick Time files to a format that my DVD players can recognize and play? If so, what is this format?
      Windows XP  

    will I be able to convert and export the Quick Time files to a format that my DVD players can recognize and play?
    Sorry but no. DVD players require movies to be in MPEG-2, which QuickTime on Windows cannot export. You'll need to find a Windows-based video DVD creation application to be able to create disks a DVD player can handle. I can't make any recommendations, but perhaps someone else here can, or you can search the web for something like "Windows video DVD create".

  • Exporting HD video for web

    What settings should I use to compress a HD video for web?

    It depends a lot on what level of broadband you expect the user to have, and whether the video has to play immediately. There are some natural sizes to use for the video, such as 1280x720, 960x540 or 640x360, and the frame rate ought to be 24, 25, or 30, depending on the source material.
    Making it for medium to good broadband, and with wanting the video to play right away, you could do say 1280x720, 1 megabit per second, H264. It would look reasonably good. If you don't mind people having to download for a little while before the video can play, then take the data rate up to 3 mbps.
    So, one way to look at that would be to use the AppleTV preset from QuickTime Player, then open that mp4 file and save as to mov (just to make your html task easier). It would look very good, but might take a bit of downloading time before it's ready to start playing.

  • How do I export a Final Cut Express 4 movie using quick time conversion without stretching the image?

    I have created a movie in Final Cut Express 4 using videos and still photos of various aspect ratios and resolutions.  Some of the photos are verticals.  When I try to use File>Export>Using Quick Time Conversion, my images end up being stretched horizontally when the video is finally processed.  I have tried preserving the aspect ratio but the video still ends up stretched horizontally.  What should my settings be in Quick time conversion?  I just want to make a video for YouTube.
    Thanks.  -Bob

    If you shoot in one of the following modes you should be able to Log & Transfer directly into FCE:
    HD:  1920x1080/60i (FX or FH mode)
    HD:  1440x1080/60i (HQ or LP mode)
    SD:  720x480/60i
    1080/60p (PS mode) seems to be the default mode in your camcorder.  FCE only supports progressive video in 720p50 or 720p60.   That's probably why you have had to import via iMovie.
    It would be better to upgrade to Final Cut Pro X, the version currently supported.  FCE was discontinued over 18 months ago and is not supported on Lion or Mountain Lion.

  • Getting videos for web viewing right

    Using Xserver on Quad Mac G5 and QTSS. I would like to stream videos like the one in Apples live events. Quite impressive. http://www.apple.com/quicktime/qtv/mwsf08/
    Using FCP pro 5.1.4 compressor 2.3 and selecting QT 7 for download. Using this on a web site produces less than desirable results. Usually blurry video or I get the "Q" in the movie template of iWeb and have to wait some time for it to download to start playing.
    What are the tools used to create the high quality videos in these live events?

    I'm tagging this one also.. I'm a new convert to the Mac (one more sleep until Mac Pro deliery!!). I normally do 10 megs for 2 minutes of 640X480 WMV video for web delivery and thought that was good when editing on the PC.. until I started to see some of these tech tutorials also.. and yeah.. crisp! But more importantly, is that thought the 100% viewing size might be on the smaller size, there isn't a lot of visual quality loss when expanding the view to 200% or more.. Now THAT was impressive..
    I want to learn all of this.. =) So much stuff, so little time.. sigh

  • Why is my Mac not using Quick Time when I want to start some Apple tutorials?

    I got a new MacBook Pro this April. When I want to run some applications that use Quick Time, it suggests that I should download Quick Time. When it takes me to the appropriate window, it tells me I already have Quick Time installed with the OS. Why is it doing this?

    Hello fmomade,
    Some older video and software still requires an older version of QuickTime (version 7) that isn't included with Mountain Lion. It can, however, be downloaded and installed here.
    Installing QuickTime Player 7
    http://support.apple.com/kb/HT3678
    A Mac OS X v10.6, OS X Lion, and OS X Mountain Lion-compatible version of QuickTime Player 7 is available for use with older media or with AppleScript-based workflows. QuickTime Player 7 can be used to playback formats such as QTVR, interactive QuickTime Movies, and MIDI files. Also, it supports QuickTime 7 Pro registration codes for access to QuickTime Pro functionality.
    To install QuickTime Player 7 on OS X Lion and OS X Mountain Lion
    Download QuickTime Player 7 from here.
    Double-click "QuickTimePlayer7.6.6_SnowLeopard". Note: This download is compatible with Mac OS X v10.6 or later.
    QuickTime Player 7 will be installed in your Utilities folder.
    Cheers,
    Allen

  • Export using quick time

    Hi there everyone
    I have just exported using quicktime and the appropriate settings in imovie, when I went into idvd to set up and bring in movie it said that it hadn't been prepared for sharing and to share using media browser. Do I have to also do this if I have exported using quick time ?
    Or as normal am I missing something
    Thanks
    Tim

    Mate trust me stick to the computers i'd say...... It was fun and I miss it alot but its not easy. We were farming a particular species called discuss hanni - asian i think and they are so delicate compared to others, they're the hardest to keep from dying and maintain a decent growth rate but they fetch serious money..... Its ok for the farms in japan and places alike as labour is so cheap but we were here in I Ireland and Labour is lets just say a wee bit on the expensive side. To cut along story short we were flying it we were the biggest farm farming that species in Europe and the first in the world to start using recirculatin water systems ( only use 5% fresh sea water per day ) - less pumping costs and manual cleaning labour costs. We were looking to sell 100 ton a year so needed appropriate investment - around 5 mill over 10 years - along came mr recession investors pulled out and bang. I now wake up in the morning look over the sea and see a ghost farm out on the point....... Thats why I have now ventured into the wedding business ( video booths ).......
    Ireland is not in a good place at the mo....
    Thanks for help
    Tim

  • Quick Time Pro for evaluation

    I need to convert video files with the .MOV extension to a .AVI extension in order that videos can be read by a Sony DPF-D1020 Digital Picture Frame. I have spent 2 days trying different types of evaluation copies from different companies but nothing works. The conversion process completes successfully, but the Digital picture frame cannot read the converted files.
    Can somebody help me out? Is there a place where I can get a copy of Quick Time Pro for evaluation purposes - I want to see if it works before paying $35.
    Thank you

    I need to convert video files with the .MOV extension to a .AVI extension in order that videos can be read by a Sony DPF-D1020 Digital Picture Frame.
    You need to determine which codecs the DPF-D1020 can read and then convert using one of those codecs. AVI is a container, not a codec.
    Is there a place where I can get a copy of Quick Time Pro for evaluation purposes - I want to see if it works before paying $35.
    If you're just trying to convert files, use the free MPEG Streamclip instead.
    (54794)

  • How exactly do I transfer my dvds to my ipod using quick time pro 7?

    I keep seeing how to transfer them using the videora software, but can I transfer them using quick time pro 7? if so, where can I geta step by step tutorial on it?

    ok. In the link you gave me, it says if I have not
    already recorded my movies then to click on a link it
    has there, but it's only for mac users, I have pc. do
    I need to record my movie if im using a pc before I
    can transfer the movie? if so, how do I, since that
    link if for mac users only
    That link is talking about getting the video off a digital video camera. You want to get it from a DVD and we've already established that you can't do that with Quicktime Pro.
    Getting video off a camera using Windows would be specific to your camera and the software you use to do it.

  • Unable to play Quick Time movies in web pages

    We have Quick Time 7.0.4 player installed on Mac OS X v10.4, But we are unable to open Quick time movies in web browser from external web sites.
    It gives us error ‘To view this movie, you will need QuickTime 5 (or later)’
    If we open Quick time movies from local disk in web browser then it works perfectly alright.
    Could you please let us know the reason behind this?
    Note: I have encounter this problem on safari and IE 5.2 browser.

    For instance if you go to this page again in Safari,
    http://www.apple.com/quicktime/qtv/mwsf06/
    and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
    You will find this, which shows the url of the movie itself.
    <param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
    If you copy just this part:
    http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
    And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
    If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

  • Can I use quick time player to play movies  TV shows

    Can I view movies TV shows & other videos using quick time player instead of itunes player?
    If so how do I do the switch?

    Find the movie in Finder, right click, open with QuickTime.

  • FCE crashes when export using Quick Time

    Hi All,
    When I select "Export - Using Quick Time Conversion", FCE crashes. I tried to repair permissions and rebooted but it did not help.
    Export using QT was working fine last week. I did some maintenance checks with Onyx over the weekend. Could it be the problem.
    Any suggestions for fix?
    Thanks.

    2007 MacBookPro
    Mac OSX V10.6.3
    2.2 GHZ Intel Core 2 Duo
    4GB RAM
    FCE Scratch Disk is an external 500GB drive (it has always been and it's been working fine the last 1.5 years) External drive is connected via FW800.
    In Final Cut, I use HDV1440X1080 1080i. Please let me know if you need any other settings.
    I use Quick Time V10.0 (113)

Maybe you are looking for

  • Having one field display the text of a different field in a statis form

    Hi All-- My goal is to pull back a single value and display it in two fields, using a static form and formhandler. When a co-worker had both fields with the binding used to retrieve the value, he found that the population for the field was getting ga

  • IPhone - Upgrade to Software Version 5.0 - Apple ID Must be an email address

    I was prompted to upgrade my iPhone to version 5.0 this morning and did. After some time, a message said that my phone had been restored to factory settings. The next message said that it would restore from a recent back up. It did. The message now s

  • Lumia 1020 missing pro cam app

    I've had this phone for for about 4 weeks now and have used the Nokia pro cam app every day. A few days ago I tried using it by pushing the camera button but the tutorial for the smart cam came up instead (I've already gone through the tutorial). I l

  • Convert Photoshop Elements 7 for Windows to a Mac version?

    I have Photoshop Elements 7 for Windows and just got a Mac.  I was wondering if Adobe would convert Elements to a Mac version for a fee.  Anyone had experience with that?  Thanks. tialldplucy

  • [b]Printing reports, getting a final blank page[/b]

    Hi, I'm printing out various reports, however i always get a final blank page. Any ideas how to suppress this? Also I would like to get rid of the page number at the top of the page and url address at the bottom if possible. Thanks Khalid