Using Quicktime Conversion

I can't find "Using Quicktime Conversion" from Final Cut X.   Can anyone tell me where to find it?

Choose File->Share->Export File. This will use Quicktime to export in one of several possible options; like Tom said, the options are somewhat limited.
If you need a different export, then create a Master File, and use MPEG Streamclip to export that with the settings you want.

Similar Messages

  • Audio and video out of sync when using quicktime conversion

    hello,
    i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
    how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
    any help is appreciated. thanks a ton in advance.
    cheers,
    clay

    What format are you converting the HDV to?
    If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
    x

  • Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

    Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

    Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

  • Creating Chapters using quicktime conversion for iDVD?

    I'm gonna make this as simple as possible.
    Please do me a favour and read this first: http://support.apple.com/kb/TS1611
    So I cant export as 'Quicktime Movie', instead follow the instructions and export using 'Quicktime Conversion' Ok thats fine but..........
    WHAT ABOUT THE CHAPTER MARKERS?!!!!!!!!!!!!!!!!!!!!!!!! SOMEONE HELP ME!!!!!!!!!
    .........thanks

    https://discussions.apple.com/message/9408556#9408556
    Al

  • Final Cut Pro 5.1.4 crashes when using QuickTime conversion export

    Our copy of Final Cut Pro 5.1.4 has started to crash when exporting using QuickTime Conversion. It gets about 66% complete, then dumps out. I have updated FCP using Software Update and QT to the latest version. Any ideas why this happening? Pro Kit 4.5 installed. QuickTime Pro 7.4.5
    My previous post had the wrong version of FCP. Dyslexia sets in.

    Erik:
    quite often during render I get the error messages "The specific file is in use by another application"
    Check this Apple doc:
    http://docs.info.apple.com/article.html?artnum=302790
    I think that was solved with 10.4.10.
    About the crash problem, you would post the system configuration of that computer.
    Hope that helps !
      Alberto

  • Unable to "export using quicktime conversion" getting "General Error"

    When trying to export 720p sequences using "export using quicktime conversion," -> to H.264, pro res 422 H, Pro Res 4444, anything... The export bar goes all the way to 100% then I get a "General Error" Message.
    I have a Matrox HD card and here are my specs:
    Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.8 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          12 GB
      Bus Speed:          1.6 GHz
      Boot ROM Version:          MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):          G88111W5XYL
      Hardware UUID:          99E22DCE-A768-5AD0-9134-7316FF147D0D

    What are the properties of your source clips for your project? Click on the source clip in the FCP browser, and once selected type Command + 9 to see the properties of the clip. Either report those properties, or  take a screen shot of the Item Properties and post it here.
    What are your sequence settings?
    Click anywhere on the timeline, and type Command + 0 {zero}, then either report them or take a screen shot of your sequence settings and post it here.
    Have you tried restarting your system?
    Have you tried trashing your Final Cut Pro preferences?
    https://discussions.apple.com/docs/DOC-2491
    MtD

  • Problems in Exporting in FCEx HD using Quicktime Conversion

    I am currently editing video footage for web delivery using Final Cut Express HD and am having problems with the export using Quicktime conversion. When exporting to a Quicktime movie, there are no problems with the export. When exporting to MPEG-4 using Quicktime conversions, the audio is fine but the video image is very choppy and quality is significantly reduced. Is there a filter I need to apply to enhance the video for MPEG-4? Are there specific settings that work best with MPEG-4 in H.264?
    Thanks for the help

    MPEG-4 export only works in specific frame sizes. The greater the image size the higher the data rate you'll have to use to produce a good quality image. The quality of the compression is going to be to a substantial degree dependent on the quality of the original recording and the original compression.
    YouTube uses Flash video for delivery BTW, not MPEG-4.

  • Can't export as a still photo using QuickTime conversion

    In FCP7 ...
    I've always been able to take one frame of a video (as a Sequence) and "Export Using QuickTime Conversion."
    When I try that today, FCP keeps locking up and crashing.
    Help!

    Sometimes my machine starts acting oddly when dealing with QT files. In my case the problem is related to when I start the computer without my firewire mixer also up and running. It is usually solved by shutting the computer down, unplugging it from the mixer and the power for 15 minutes then restarting. Unplugging the thing and letting capaciters drain seems to solve it. Your mileage may vary.
    If nothing else, running Digital Rebellion's Preference Manager to delete your FCP preferences may help. It is free and can be found on DR's website.
    Please note that all your settings will be reset to defaults. Custom setups, scratch disk locations, etc will be discarded and you'll be back as though you just installed the software.
    Good luck.
    x

  • Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

    Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

    When you converted the original files via MPEG Streamclip, what did you convert them to?
    Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
    Download Preference Manager from Digital Rebellion (free) at:
    http://www.digitalrebellion.com/prefman/
    It will allow you to archive your current preferences if you wish to restore them later.
    MtD

  • Saving Settings for use with Export using Quicktime Conversion

    Dear All,
    Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
    All the best, Sean

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • Export using Quicktime Conversion Save Prompt Freeze

    I'm seeing a bug when I export using Quicktime Conversion using Final Cut Pro 7. From the main save prompt window, if I open "options..." and make my export adjustments and return back to the main save window again, it does not initiate a save when I click the save button. Further, it will not let me cancel out either. The save/cancel buttons will click blue for a moment as if they were pushed, but nothing happens - the save prompt window is totally unresponsive. My only course of action is to force quit. (note: the force quit window does NOT report FCP as unresponsive.) This problem does not happen every time, but enough to be a major annoyance. Has anyone had this issue? Thank you.

    Your lunch break long wait rules out any "frustrated after a few seconds" reaction and would certainly be long enough for a drive that has dozed off to react.
    Some particularly processor intensive formats could conceivably have a short delay before something starts to happen.
    Writing to the system drive is not something I would personally do -I have dedicated storage for my entire video workflow. But this would also rule out a sleeping drive. The system is constantly being written and read.
    If you are writing particularly large files to the system drive, bear in mind that a good chunk of the "tons" of free space is allocated to "swap" files -data that can't be written into RAM is off loaded to the hard drive. Depending just how large the swap files are and how large your video files are, there could be a delay in reallocation of swap file space to allow the video files to be written. Having less space for swap files can cause the OS to slowdown. Drives will generally become less responsive, the fuller they are.
    Note that I am by no means an expert on this, so the percieved slowdown may be less significant than what the paragraph above implies.
    Run Disk Utility and make it a regular part of your maintenance routine. Writing and reading the huge amounts of data that are used in video production can cause problems with the directory structure. Better to catch it early and fix it, directory damage is culmulative. You might not notice it until your files are no longer accessible.
    How is the system response when you export a project as a self contained movie using current settings (same as your Timeline)? Exporting with QuickTime Compression always recompresses your video -even when writing using the same codec as the Timeline already uses, so it will take longer to process.
    Self contained with current settings is the workflow that I always use. The resulting "master" file is brought into Compressor to make the deliverables. This also frees up FCP and lets me continue editing while compression runs in the background.

  • Final Cut Pro 4:  Problems exporting video using QuickTime conversion

    just recently updated my Mac to version 10.4.11 -
    Ever since, Final Cut Pro won't let me Export my video using QuickTime Conversion.
    Its starts exporting, then freezes at 79%. A general error message pops up.
    I know its not a space issue, because I have 20GB left and the video i'm exporting is only 2 GB.
    I installed all the software updates.
    Can anyone help? Do I need a new version of Final Cut?

    1) this is the final cut express forum not the pro.
    2) 10.4.6 is not the latest, try updating to 10.4.11
    3) after any system update you must run disk utility to repair permissions or errors that may not have been addressed during the upgrade process.
    4) have you tried exporting as a reference movie then playing it in qtpro, if ok then export.
    5) what are you trying to export too?

  • Missing with chapter markers after Export Using QuickTime Conversion

    I have my FCE workflow setup as follows:
    I create the sequences using relatively large video source files, in Apple Intermediate Codec (AIC).
    Then, I use Export -> Using QuickTime Conversion to H.264 Codec, but my chapter markers are lost.
    If I use Export -> QuickTime Movie, the chapter markers are preserved, but the codec is still AIC.
    I need a compressed file with chapter markers. What am I missing?

    One more time: "Where are you looking at the exported file? After making a DVD or somewhere else?"
    Can you answer this for me? How are you looking at this material? Off the DVD you've burned? Is that what you're saying? Comparing the QuickTime Movie export to a DVD burned from a PhotoJPEG export? Or are you playing it from the computer to HDMI? If so are you using the QuickTime player? Is the QT player set to high quality playback? Yes, PhotoJPEG (not JPEG Photo) is a very large file especially at full quality. You probably don't need any more than 75% quality. I'd be very surprised if you say you can see the difference between 75% and 100%.
    The length of the video is important not the size of the disc. iDVD's compression is fixed by the length of movie and the amount of content that has to be encoded.

  • Export Using QuickTime Conversion To Windows Media (.wmv)

    I have Final Cut Pro HD version 4.5 that runs on my G5. I have a problem when I try to export video to Windows Media file (.wmv). After I select Export / Using QuickTime Conversion and than choose Windows Media in Format box, Final Cut does compile a .wmv file. The only problem is that it's only 30 sec. long when the original video that sits on Timeline is 2 mintues long. When I export the same video to Quick Time file, everything works perfectly and the duration of .mov file is the same.
    I tried to set in and out points, but it made no difference.
    So now I can't make a file that can get played on Windows computer that has only Windows Media player. And .avi file is not an option since I can't get one compressed enought, so it turns out too big. I understand that I can buy some third party software to make .wmv file, but I want to make sure that out of box Final Cut Pro HD 4.5 can't make Windows Media files before spending extra money.

    You need to buy the full version of flip-4-mac to encode/save to a wmv. Sounds like you only have the trail/free playback version...
    You need either the pro version or studio version:
    http://www.flip4mac.com/wmv.htm

  • Export using QuickTime Conversion + SMB automount problems

    I have noticed an interesting (read bad) behavior in FCP (5.0.4) - If I try to do an export using quicktime conversion with the destination being an automounted (via netinfo) smb share as opposed to a apple-k mounted share in m4v, 3g, mp4, image sequence, still image or quicktime movie - I get a File Error: Unknown Folder. However if I do the same export but in avi, wmv, dv stream, or flc formats, it works fine.
    Trying to do the same export operation in quicktime pro produces an error -120, which is equivalent to directory not found.
    Seems like a quicktime problem dealing with the automounted shares, anyone else run into this issue? Have a fix?
    Thanks!
    C M I

    I know I can save locally + that it is tied to the quicktime components - I'm looking for fix/workaround that addresses the issue and streamlines my workflow, thats the reason I set up the automounter in the first place.
    So it's clear though, quicktime has no problem with smb in a general sense, it only has problems w/ the automounted smb shares - manual or command+k mounting of smb shares offer no problems.
    I use the automounting for two reasons: first is to emulate unc paths for rush render queue and second is to have consistent working paths to static content on a file server so final cut docs can be passed from editor to editor and link consistently.

  • File export using quicktime conversion quit!!!

    I am trying to export a 3 minute film and I have just downloaded flip4mac studio as my client needs it in wmv format. I exported the film yesterday to a quicktime format, so they could watch it online. But today, after i downloaded flip4mac studio when I click on file > export > using quicktime conversion the whole of fcp just quits! when i click on file > export > quicktime movie it is fine, it just seems to be when i click on quicktime conversion. What is going on, it was fine yesterday!!!
    I am using final cut pro version 5.1.4. Please help me because I don't know what the **** is going on!?!

    I have a mac pro, 2x 2.66 GHZ Dual core Intel Xeon, 2 GB RAM, 1ST hard drive, free space 136GB - second hard drive 204GB. Operating system: Mac OS X 10.4.10 - Quicktime version 7.2.0 - player version 7.2. - Flip4Mac version 2.1.2.72, flip4mac wmv studio, downloaded and purchased from their site.
    My project details - filmed on Sony Z1 in HDV, captured via firewire (preset HDV), device preset Sony HDV 1080i 50, sequence preset, HDV - 1080i 50.
    These the normal settings i usually use for all the projects that I have ever done. Have I always set it up wrong or am I just going crazy? Also do I need a separate plugin to connect flip4mac and final cut? I have never used flip4mac before, so I don't really know how it works!
    I googled 'flip4mac final cut plugin' and it said:
    Final Cut Pro: Flip4Mac MXF components may cause unexpected quit
    Issue or symptom
    With more than one Flip4Mac component installed, Final Cut Pro may unexpectedly quit when you open it in Mac OS X 10.4.10.
    Products affected
    Final Cut Pro
    Mac OS X 10.4.10
    Flip4Mac MXF components
    Solution
    Delete or temporarily remove the following items:
    Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac Editcam Plugin.bundle
    Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac XDCAM Plugin.bundle
    Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac Profile Plugin.bundle
    Library/Preference Panes/Flip4Mac Editcam.prefPane
    Library/Preference Panes/Flip4Mac XDCAM.prefPane
    Library/Preference Panes/Flip4Mac Profile.prefPane
    Library/Frameworks/Flip4MacPro.framework
    Library/QuickTime/Flip4Mac Editcam.component
    Library/QuickTime/Flip4Mac XDCAM.component
    Library/QuickTime/Flip4Mac Flip4Mac Profile.component
    Is this relevant to my problem?
    Thanks for your help.

Maybe you are looking for

  • Get Error message with Roport Generation toolkit

    Hi:    I am new to labview and want to make a report that content of  the FFT spectrum data and FFT figure. a error message as *The report generation toolkit does not support the data you are using*.I used a for loop for calculate the FFT,does this c

  • Itunes won't detect my devices

    Itunes just updated and now it won't detect any devices plugged into the computer, such as our iPhones 5, and 4

  • Why did itunes crash corrupt my whole computer?

    i hate itunes so much! i tried to download some tunes and the files were corrupted on apples end, it wouldnt let me download them, it kept giving me errors. then you know what happened, itunes lost my whole library, then you know what happened, all m

  • Java.util.zip.ZipException: invalid block type: thrown by adapter-OIM 11g

    Hello Everyone, I have deployed an adapter for provisioning to my custom resource and I am calling the code from a process task in the adapter factory. The jar for my adapter is place in OIM_HOME/server/JavaTasks . Inside the code there is a need to

  • Itunes will not close down,

    My i tunes will not close down even using force quit,anybody got any ideas please.