Using Quicktime in Keynote

I have a automated presentation set up in keynote. I want to add a quicktime of a 3 minute slide show (exported from Iphoto). My problem is Keynote wants to limit the quicktime to 60 seconds in the automated mode or I can play the entire 3 minute QT but I have to manually click in order to start the loop over again. Any way around this limit?
Thanks
Brian

No other builds in the drawer grabbing a click you didn't intend? Take a walk round the block. Open a new document and rebuild with considering the last file. If it's still happening... i got know idea why but don't lose your mind, it's a terrible thing to waste.

Similar Messages

How to download WWDC 2006 keynote using QuickTime Pro?

Hi!
How can I download the WWDC keynote using quicktime pro?
Matt

You can't...The video is streamed. One of the biggest draw backs to steaming a video is you can't download it..(draw back for end user)........ You can use a program to capture the video on the monitor.

Exporting using Quicktime - but file never appears??

Ever since I downloaded the latest iMovie '11 software update (9.0.7), every time I try to export using Quicktime, it takes two hours to export, shows no error messages of any kind, but the exported film NEVER shows up where I saved it to (or anywhere else on my computer). Has anyone else had this problem?
I can't export using any of the other options because the film is so large (the Quicktime export compresses it enough to upload to Vimeo, while exporting it straight to Vimeo does not). The Quicktime export (and all the settings still in place) worked perfectly before I installed the 9.0.7 update.
I need to get this film off my computer pronto. Please help???

Hi Mike:
Apologies for the long delay in response; have been working on other things of course.
I don't know how to use OS X's postscripting feature, but I did try and succeeded in creating a .ps file. When I try to open the file, however, it tells me there is a postscript conversion error and the file cannot be converted to pdf.
Manually distilling the file is exactly where the problem arises.
For giggles, I tried to select the OS X's pdf'ing feature instead of postscript or distilling, and it worked instantly! The dimensions are correct when I open it up, and the file size is large enough to indicate to me that the resolution is likely sufficiently high. I would not know for sure of course until finding out the hard way after sending it to the printers, but it seems to be a use-able file.
So, it seems that this is a pseudo-solution, at least so that I have a tool to bypass the problem when I next encounter it; however, I wonder if you have any ideas about how to actually fix the glitch? Does it have to do with the sorts of images that reside in the KeyNote file; if so, which file types does pdf not like and should be avoided?
Thanks,
Heide

No Audio when I export using quicktime conversion

Hi,
This problem has just started. In my time line my movie places with both audio and video. When I try to export it using quicktime conversion I get a file with video but no audio. If I go to the audio settings button and click preview, I hear nothing. I have exported using the exact same settings many times before without problems.
If I export the file using quicktime movie, I get both audio and video.
This is driving me crazy, Can anyone help? Thanks!

I got no audio on the DVD when I exported from FCE using the Quicktime Movie setting. I finally determined it was because my audio was at 44.1k Hz. I upsampled to 48k and there was sound on the final DVD. This is not normally a problem when input comes from a camera, but if you are doing a DVD of a Keynote presentation and adding separate sound to it from a CD, this becomes a problem.
Certainly no more than a little annoying that there's nothing said during the FCE export that this audio won't be exported. It's just not there.

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2, running Mountain Lion. I use trim then export but it doesn't give the movie option as a format. What would you suggest i do?

I'm not sure why you're using a FAT32 drive, but using ExFAT instead of FAT32 would be a better overall choice as it doesn't have the 4 Gig limit.
http://www.tech-recipes.com/rx/2801/exfat_versus_fat32_versus_ntfs/

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

How to play MP3s on IPhone without using QuickTime

I listen to a lot of audio lectures that come in an email with a direct link. My phone will automatically open these and play them using QuickTime, but QT doesn't have an option to bookmark. I don't typically finish the full lecture in one sitting so I need to be able to bookmark my place. iTunes will not work for me for this as I am not always able to take the several extra steps necessary to download to my computer and then wait for them to show up on my phone through icloud which sometimes takes days. Always hours. Is there another app that will do this? Audible is a good example of how I would like it to work.

Yes I have, thank you. And google.

HT201290 how to use QuickTime with OS 10.9.5

I would like to watch downloaded files of a TV series which are on my hard drive. However, 4 of the downloaded files will not play using QuickTime. Episodes 5 through 11 are fine. I borrowed an external drive from a friend who downloaded the same and have attached the external drive to my laptop--same problem. I downloaded the previous QuickTime Player but that doesn't help either. Please--any suggestions?

I would like to watch downloaded files of a TV series which are on my hard drive. However, 4 of the downloaded files will not play using QuickTime. Episodes 5 through 11 are fine. I borrowed an external drive from a friend who downloaded the same and have attached the external drive to my laptop--same problem. I downloaded the previous QuickTime Player but that doesn't help either. Please--any suggestions?
Since it is unlikely that two different people downloading the same files would end up with the same files being corrupted... Were episodes 1-4 encoded using the same compression formats as 5-11? Do episodes 1-4 open in an alternative media player like VLC? What error message, if any, is given for not opening?

I have lots of .MOV files on my iPhone5 that I need to transfer to my PC. Using QuickTime Player 7.7.4 I am unable to view them once they have been copied to a hard drive or directly from the iPhone via USB. 1% of the time a vid is viewable

I can tranfer them to a hard drive on my PC, but am unable to view most of them using QuickTime Player 7.7.4. Doesn't matter if I'm viewing them via a USB connection to my iPhone5 or from a hard drive after the file has been copied via USB. 1% of the vids are viewable, 20% open with a black screen and audio only. The rest open with a blue, purple and green stryrated mess and no audio. Yes its a Quick Time problem I know but where do I post this question in the community? Also searching my drives for other .MOV files downloaded from the net I find the same problem with them.

Heres what I don't like about VLC, but at least the files are viewable...somewhat.
1. You can't flip the image 90degrees, needs to have a rotate feature for sure. This needs to have keyboard shortcut so vids can be rotated easily as one may have shot video horizontally and vertically in the same take.
2. Opens file to a very large window, most of it off the screen, it should REMEMBER what you resized it to, so the next time a video is played you don't have to drag the window back on the screen so you can get to the resizing handle in the lower corner.
3. Doesn't buffer while playing, so the movies are extremely erractic, starting and stopping every 3 seconds, highly annoying.
OK so maybe my PC is too slow, its a dual processor 486 Hyperrthread 2.8G but I only have 2Gigs of memory, however, bettery than 50% of the memory is still available while playing a vid (memory is checked every 4 seconds with a program), but I have 90-100% CPU useage going on while playing.
Maybe I should think about a new computer.

Can't open any version of iTunes or use quicktime

yesterday i downloaded and installed iTunes 7 (before i knew that there was problems with it). when i opened it massive chunks of my library were missing so i decided to revert back to an earlier version of itunes. removed iTunes 7 and installed iTunes 6.0.5 (think that's the correct number) but it wouldn't open. it comes up with a message saying that iTunes had encountered an unexpected error and needs to close. i've tried uninstalling and reinstalling different versions of iTunes and rolling back to various system restore points on my computer but i constantly get the same message. I can't use quicktime either - it just comes up with the same message.
HELP!!!

I can't use quicktime either - it just comes up
with the same message.
just doublechecking your precise error message. is it
an "itunes has encountered a problem" message? or is
it something a bit different? if it's different, what
is the precise text? (include error message numbers
if you're getting any.)
i don't know if this will mean anything to you...
Faulting application pictureviewer.exe, version 7.1.3.100, faulting module unknown, version 0.0.0.0, fault address 0x63656666.
for some reason the error message i was getting on screen when i tried to open QT isn't coming up now but QT isn't opening either. i got that text from going to control panel>admin tools>event viewer. the text i was getting previously when i tried to open QT was "quicktime has encountered an unexpected error and needs to close" (or something v similar).
Windows XP

Problem Exporting for Web files created in FCE using Quicktime

I have been using FCE 4.01 on Mac OSX 10.7.5 with Quicktime 10.1 (501.29).
I convert my footage in Mpeg Streamclip (GREAT free program) and set the files to the Apple Intermediate Codec. This makes them work really well in my timeline and I don't have rendering issues or problems.
So, my problem comes when I File/Export/Quictime Movie.
The original file plays fine, but they're 2-3 gbs each, so I put them into Quicktime to convert them to a webfriendly size, but every single time they come out as an audio only file. GRRRR!
Any help would be greatly appreciated. Maybe I'm missing something stupid.
Thanks so much for your help.
Sincerely,
Steve

Why not bring the exported AIC file back into MPEG Streamclip instead of QTX? You'll have a lot more control.
Compress the file to H.264 and restrict the data rate according to the resolution you're working with and to something consistent with the guidelines of the Web Service (say, You Tube) you're uploading to, (For example, something like 6 Mb per second would be about right for a 720P file.)
Or use Quicktime Conversion from FCE.
Good luck.
Russ

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

HI GalaxieMusique,
I'm french too, but I'm going to write this post in english so that everyone may understand it
I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
In regards with quicktime, you can download QuickTime 7 here:
http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
Sorry for the english, we french people can make mistakes sometimes
If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Using Quicktime's "Export for Web" feature in iWeb?

Greetings,
Does anyone know if this is possible within iWeb, that is, to use movies created using Quicktime's "Export to Web" feature, which really seems to deliver superior movie quality?
Much appreciated,
DaveB

Thanks, good stuff, though I'm still having a small problem with this. I'm getting a gray line around the top and left of my movie and the right side of the player is getting cut off. When I try to make the width larger, it just moves the gray line further to the left.
Any ideas?
http://www.brianderr.com/brianderr/copythis3.html
*This is the script that I added to the html snippet in iWeb.* I changed the height to 505px because it was cutting off the bottom of the player at 496.
<iframe src="http://idisk.me.com/brianderr/Public/KANYE%20PT%201/kanye1.html"
style="width:720px; height:505px";
scrolling="no">
</iframe>
*This is the script from my read me file that I kept:*
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>QuickTime Pro - Export for Web - KANYE PT 1</title>
<script src="http://www.apple.com/library/quicktime/scripts/ac_quicktime.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/scripts/qtp_library.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/stylesheets/qtp_library.css" rel="StyleSheet" type="text/css" />
</head>
<body><script type="text/javascript">
</script>
<noscript></body>
</html>

Exporting to Flash using Quicktime pro

I'm trying to export a 43 min vid from FCP6 using quicktime conversion. I want to export to Flash. Its for web content, and its in widescreen.
Any help with size and converting to flash would help. I've never done web content before.
Thanks!!
tec24

First, some questions: 1) what's the purpose? 2) who's your intended audience? 3) has it got to be done quickly, as in a short deadline? 4) Why Flash? 5) Why 43 minutes (have you ever in your life watched a 43 minute streaming video on the internet on anything but the most powerful 'puter with the highest-speed, dedicated internet connection)? 6) Do you care that what people see you throw up on the internet ultimately reflects on how you yourself are perceived by those same people?
For what could be a quick disaster, or if this project is mainly for sh*ts and giggles, follow the advice given in the first reply, post it pronto and don't bother with the rest of THIS reply.
Or, if you're on a deadline, pay someone who TRULY knows what they're doing to do it for you -- and they might still balk (if they have any scruples) at a 43 minute web video unless you've got a really good reason to make folks wait for way longer than 43 minutes of stop-and-start Flash stuff.
Otherwise, if you're not in a hurry:
FIRST, procure a book on the subject, like Apple's "QuickTime for the Web" (available on line and at Borders, for sure).
THEN, with some reading under your belt, be prepared to start experimenting with combinations of smaller movie dimensions and FPS rates (generally, half of what the original is); then on to varying types of video compression (Sorenson or Sorenson3 have historically given some of the best results, with H.264, the newest and more difficult to configure giving the truest quality, but not discounting the various MPEG settings; and last, but certainly not least, playing with your audio compressions to see what you're willing to lose in order to (hopefully) gain an internet audience. Like it or not, it depends on YOUR vid's content and audio as to how to make it small enough to be seen in its best internet presence.
OR, You might try some of Compressor's export settings -- and be totally satisfied. It's all relative to the work you've created and how long you're willing to work at what you're willing to sacrifice to still pull off a good illusion of your original video at a fraction of its original size.
I wish it weren't so, but there's no quick and easy answer to your question if you're serious at all about the end result. You have to consider all the angles I've posed (and then some) to get good results that'll show YOU in your best light.
Mac OS X (10.4.10)
Dual 2 PowerMac G5--latest model Mac OS X (10.4.2)

Using Quicktime in Keynote

Similar Messages

Maybe you are looking for