Using reference pages for document revision tracking

I'm hearing a goofy idea at work about using Frame 7 reference pages for revision tracking on a document. I think the idea is to create a reference page and put a revision tracking table on that page.
My impression is that reference pages aren't for users to muck with very much. Template updates could affect them, future Frame upgrades could affect them, etc.
Is anyone else out there doing something similar and does it work?

I can see a problem with your approach if you import formats from one file to many files. You can easily overwrite the revision information.
Say you make a reference page called "REVS" for all your book chapters and begin populating the revisions. At some point in time, somebody imports the formats (including reference pages) from chapter 3 to all the other files in the book. All the reference pages named "REVS" will be overwritten with the chapter 3 revision information.
A way ensure against overwriting would be to give a unique name to each file's revision page (REVSch1, REVSch2, etc.); however, you may end up with multiple, unused, outdated reference pages in each file. They won't cause any harm (except maybe causing confusion when updating the rev info), but may bloat your file size.

Similar Messages

  • How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

    how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

    I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
    The way I do it, is I assign all my drum tracks to a buss, say buss 1.
    Then, on buss 2, I assign it's INPUT to buss 1.
    So buss 1 (all the drums) are feeding into buss 2 simultaneously.
    Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
    You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
    I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

  • Reference Field for Document Type AB has made Mandatory

    Dear Experts,
        In OBA7, for Document Type AB (Accounting Document) I had clicked the Reference Number Field Check Box (Made it mandatory)
        So it became mandatory every time to enter the Reference Number when using the Document Type AB
        Now I am facing the problem, when using the T Code F-44 (Clear Vendor - Header Data) the system is popping an Error Msg, " For Document Type AB, an entry is required in field Reference "
         Since their is no Reference Field available on the screen, where should I enter the data for the same
        I am unable to understand How this issue can be resolved, I tried a lot but failed to get a solution
         Their is Reference radio button available on Additional Selections tab, but not field
    So please help ..!!
    Regards, Nimish

    Dear Manmay,
          You are correct but the system is not allowing what you have suggested
          When I enter the vendor no. and click on Goto-Document Overview, the system pops the error message and doesnt allow me to enter anything on that screen
         Please try at your end and revert boss
        I think I may require to raise an OSS note for this
    Regards, Nimish

  • Using Customized page for logging in

    Hi all,
    I am trying to use an html page for logging into Sun Identity manager.
    Actually we have an html page, on which we have a section in which the user can enter the credentials.
    Now when he clicks the submit button, then the user should be able to login SIM.
    I thought that in backend we can pass the values entered in html page to user/login.jsp.
    But i am not getting in which attributes, we should get these values on user/login.jsp because i think,in backend it also calls some form and i am unable to get which form it is calling.
    Any pointers can be helpful.
    Thanks

    i dont thik its possible use a separate html page for login.you can customise the login page(bit difficult but you can do it there are some css and .properties files are associated with that)

  • Use Muse pages for an e-mail campaign?

    Hi All,
    My client asked if I can provide Muse content for an email campaign.
    If I export my Muse project to a folder then view the .html files using a browser the image looks close but not exactly right.
    Does anyone have experience with using Muse designed pages for an e-mail campaign (as to how this can be done)?
    Thanks!
    Gary

    I asked David Blatner, who runs the InDesign Secrets website, the same question about creating HTML Newsletters with Muse in a future edition, and he replied:
    "The problem with "html email" is that it is dependent on very old email clients. For example, we are having a problem right now that some (but not all) people using Outlook 2003 are having trouble reading the free InDesign Tip of the Week email that we send using mailchimp. Yes, Outlook 2003.
    Basically, html email has to be super lowest common denominator HTML. The best html email wouldn't even use CSS, but most email clients can read very simple css now. But remember that later versions of Outlook use MS Word as their HTML viewer, so… it's painful. That means, you really want to use tables and shim.gifs and stuff like that. It's not pretty.
    Muse and in5 and most other tools are interested in creating 21st century HTML, not html from 1998. That's why it's extremely unlikely we'll see anything like this from Adobe (or probably even anyone else)."

  • Using iWork pages for note taking - Outline Mode

    I am trying to find a good way to take notes in an organized fashion.  The other week a friend of mine was using an outline mode in microsoft office and looked to be a great way to organize his notes.  I wanted to do something similair on my mac, and it appears that iWork Pages will support the Harvard outline function which is great, and also it'll sync in the cloud, so if I'm on my ipad, it'll save to the cloud, if I'm on my iMac it'll save to the cloud.  I only have one hiccup, when I use my iPad, it doesn't seem to recognize my outline that I'm using in iWork on my iMac.  I'll start typing on my iPad and it's like the outline doesn't even exist. 
    So my question is, is there an outline feature for pages for iOS?  I want my notes to be seamless wheather I'm working in my iMac or iPad.
    Please help!

    i dont think pages for iOS does exactly what your looking for. If i were you i would just google outline apps for iPad. There are some highly rated ones that use icould sync, as well as other methods and services. Those are made exclusively for what your looking to do and most arent very expensive.
    Jason

  • Pages for ipad:  keeping track of changes in your document

    Does anyone know how you can keep or highlight changes you make in a document. I know that in pages in iwork you can turn on keeping changes, but for the ipad version i don't see how i can do that. Anyone a suggestion?

    Dont think it can be highlighted, just auto saved as you go.

  • UCM JSP - customize error page for document checkout?

    I have written some JSP pages to integrate UCM (aka Stellent Content Server) into a custom application.
    The bulk of UCM functionality is handled with idcserver.ServerBean.
    If someone tries to check out a document that is already checked out, or tries to check in a document that hasn't been checked out, they are redirected from our custom application to a UCM error page.
    I DO NOT want this to happen.
    I would like to handle any check in or check out errors with my own custom error handling page.
    I tried using the following in our JSP check out form:
    <%@ page errorPage="myError.jsp" session="true" %>
    However, UCM cheerfully ignores this and keeps redirecting right to its own page.
    Any thoughts on how I can avoid UCM's error page and substitute my own?
    Thanks in advance,
    Dave

    Hi user4884609, since we can't send PMs in this forum to other users and leaving email address like this is not good practice either would it be possible for you to upload it somewhere and provide the link for at least for like a couple of days? I'd be interested in looking into that component, been looking for something like that.
    thanks,

  • SOA 11g -- xsd -- How to access the index page for documents

    Hello Experts,
    Env:
    SOA 11.1.1.6.0
    Web Logic 3.6
    AIA 11g
    OSB 11g
    I have to upgrade existing 10g SOA to 11g and below are my questions..
    1) How and where to copy the 10g XSD files to 11g?
    2) What is he url for xsd docs in 11g. for example: in 1og i can use this url to scan the xsd documents..
    http://<<HOSTNAME>>:<PORT#>/<<XSDDIRECTORY>>/
    3) What is the equivalent in 11g? I see this directory structure in 10g.. $SOA_HOME/Apache/Apache/htdocs..
    4) I am trying this directory structure and got 404 page not found error.. http://<<Host Name>>:<port #>/soa/composer
    Any help is appreciated..
    I consider myself as beginer in SOA stack and apologies for any basic questions..
    Thanks
    Rgds
    Natrajan

    Only thing is you wont be able to browse through URL, not sure though and you can browse through the XSDs and WSDLs through JDeveloper by connecting to MDS.
    http://udayarocks.wordpress.com/2011/03/26/how-to-setup-metadata-store-mds-for-weblogic-11g-in-jdeveloper/
    Thanks,
    Vijay

  • Use reference trigger for cyclic recording data

    Hi,
    Before I start, let me briefly introduce what hardware I have and what I want to achieve.
      I  got SCXI-1000 (Chassis), SCXI-1102C (module), SCXI-1303 (terminal block,
      mainly for temperature sensor input); a couple month ago  I bought feedthrough SCXI-1180 and terminal SCXI-1302 to input my digital signal (see attached PNG file). In fact, I have two digital signals to input. The first one is Injection digital signal (input as PFI0) which will trigger the start of recording my
    temperature profile; The second is packing signal (input as PFI1), which I want to use as a reference trigger to stop the recording and save as the cycle file.
    And then the injection cycle keeps going. Please see the attached VI for details.
        I get my digital trigger working to start recording my temperature sensor profile. However, I can't get the second part trigger to stop the recording.
    The error message from running my VI is that a reference trigger is only applicable for finite sampling. It seems that I need continuous sampling to recording my temperature profile! So, by looking through my VI, please give some suggestions to do the task and solutions to solve the conflictions for sampling.
      Your assistance is higly appreciated.
    HW
    Solved!
    Go to Solution.
    Attachments:
    Arburg digital signals.png ‏17 KB
    Trigger_Test2_TransientComparison.vi ‏109 KB

    Hi, Jim:
    I've tried with the way you suggested to poll out the digital line. In your VI, it will stop the running of the whole program when the second signal jumps up. If you see my VI attached, I'd like to start recording with the first trigger and then stop the cycle file by the second trigger signal falls down, and then keep recording the second cycle until clicking stop (reference to my signal illustration).
    So what I am trying is to use both trigger signal to output a boolean value (when both trigger signals are 0), reverse it to true (1), and use it to stop the cycle file. But I am still little far away from doing the task. Is there any way to do the cyclic file as I want with or without 'Write to Measurement File' VI?
    Please edit my VI and save in V8.5. Thanks for your help! 
    Best Regards
    HW
    Attachments:
    Trigger_signal_illustration.png ‏12 KB
    Read_AI_Test2-Dig_Chan_triggers.vi ‏111 KB

  • DME - Reference field for document more than 1

    Dear all,
    I'd created DME structure for generate TXT file and it works good except for 1 field : payment detail.
    I map this attribute to structure FPAYP field XBLNR,  it should appear 2 line item in TXT file because I have 2 document for 1 vendor / payment document .
    Sample
    Document date   Reference   Amount
    21.12.2008

    Hi Raissa, we have the same problem and we have not find any solutions nowadays.
    Is your issue resolved?
    If yes, could you please tell me how?
    Thanks a lot!!
    Regards

  • Using access groups for documents

    Hi, there!
    I have groups of users with different access rights. Also I would like to setup documents groups which should be different for show to different groups of users as matrix.
    For example:
    1) General Policy is a group A, which means shown to anybody who has an access to corp portal.
    2) SOP ID123 is a group C, which means shown to selected tiny groups of users
    3) Confidential attachment to specification belongs to a group D, which granted access to 3 users only, including to CFO
    Can I use such matrix approach or it is difficult to implement?
    Or as an idea - more simple way just to create different libraries and manage access on this level?

    Hello Alex,
    I think the best solution is to create separate libraries, to separate permission.
    But if you want to have the documentation in the same library, you can take another approach. Try to create a folder, or a document set, to separate the documents. Then assign permission to each folder/docset as needed.
    finally, you can create a view to display all documents without folders. this way you can have the same view for all users, but users will only see what they have access.

  • Safari referring page for web server tracking

    I know that web servers can track what was the last page you came from before coming to your current page. (I'm not sure the right term, I think its referral)
    Would this be the last web site I opened up in any tab in Safari? Or if I create a new blank tab, and then navigate to the destination site will it just be blank because I am coming from a blank tab?

    Hi,
    The referrer would refer to the page that you *clicked the link* on, to get to the current page. So, if you have 3 tabs, A B and C and you click a link in tab B, the referrer information would refer to the previous page you had in tab B. If you just type the url while in tab B and press enter, the referrer won't be set (as you weren't 'referred' from another site.
    If you open a new tab, then there should be no referrer information sent. I'm not on a Mac to test right now, but try it with this page:
    http://www.ericgiguere.com/tools/http-header-viewer.html
    That will show what the 'referrer' page is set to. Clicking it from here should say you came from Apple Discussions. Just pasting the link in the url textbox or entering it in a fresh tab should show no referrer is set.
    Hope that makes sense...

  • How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

    Hi all,
    I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.  
    Thanks in advance.
    Regards,
    Harshada

    Moderator message - Please search before asking - post locked
    Rob

  • Why even use this web page for anything?

    THIS FORM IS FOR SUGGESTIONS.  MY SUGGESTION IS NOT TO USE VERIZON'S WEB PAGE TO DO YOUR CHANGES OR BILLING... I HAD A HORRIBLE EXPERIENCE WITH VERIZON AND USING THIS PAGE FOR CHANGES TO MY ACCOUNT.  I NOTICED THAT  I WAS GOING TO BE OVER ON MY MIN. AND I ALSO ADDED A BLACK BERRY PHONE.  I LOGGED ON TO MAKE THE CHANGES.  I EVEN TALKED TO A SERVICE REP ON THE MESSAGING TO CONFIRM THAT MY CHANGES WERE MADE.  AFTER MY BILLING CYCLE WAS UP I NOTICED THAT I MADE AN HONEST MISTAKE AND MY BILL WENT FROM 154 TO 270.  I CONTACTED VERIZON AND TOLD THEM THE ISSUE.  THEY CONFIRMED THAT I WAS LOGGED ON TO THE CITE AND TALKED TO A SERVICE REP ABOUT THE CHANGES.   I ASKED IF THEY COULD BACK DATE THE BILL AND THEY WOULD NOT.  I WOULDN'T USE THIS SITE ANYMORE AND AS SOON AS MY CONTRACT IS UP I'M OUT OF HERE! GOOD CUSTOMER MEANS MORE TO ME THEN ANYTHING ELSE AND I FEEL LIKE I WAS TOTALLY BLASTED BY VERIZON ON THIS ONE. 
    {edited for privacy}

    travislinskens wrote:
    THIS FORM IS FOR SUGGESTIONS.  MY SUGGESTION IS NOT TO USE VERIZON'S WEB PAGE TO DO YOUR CHANGES OR BILLING... I HAD A HORRIBLE EXPERIENCE WITH VERIZON AND USING THIS PAGE FOR CHANGES TO MY ACCOUNT.  I NOTICED THAT  I WAS GOING TO BE OVER ON MY MIN. AND I ALSO ADDED A BLACK BERRY PHONE.  I LOGGED ON TO MAKE THE CHANGES.  I EVEN TALKED TO A SERVICE REP ON THE MESSAGING TO CONFIRM THAT MY CHANGES WERE MADE.  AFTER MY BILLING CYCLE WAS UP I NOTICED THAT I MADE AN HONEST MISTAKE AND MY BILL WENT FROM 154 TO 270.  I CONTACTED VERIZON AND TOLD THEM THE ISSUE.  THEY CONFIRMED THAT I WAS LOGGED ON TO THE CITE AND TALKED TO A SERVICE REP ABOUT THE CHANGES.   I ASKED IF THEY COULD BACK DATE THE BILL AND THEY WOULD NOT.  I WOULDN'T USE THIS SITE ANYMORE AND AS SOON AS MY CONTRACT IS UP I'M OUT OF HERE! GOOD CUSTOMER MEANS MORE TO ME THEN ANYTHING ELSE AND I FEEL LIKE I WAS TOTALLY BLASTED BY VERIZON ON THIS ONE. 
    {edited for privacy}
    If you made a mistake and did not set the options on your account correctly, it is not Verizon's fault if you owe overages or other charges as a result.  You should call back, and if you're lucky, you may get a rep to reduce the bill for you, but in general, Verizon does not correct mistakes made by their customers.

Maybe you are looking for