Using RF at the IM level

I have a situation where I have to use RF guns for GR , GI and Physical Inventory using multiple guns. Have any one encountered such a situation.If so please throw some light on this issue.
thanks in advance
Kaushik

Hi Kaushik,
you must develop a transaktion, when the LMxx transaction are not enougth.
Then to display all on your mobile devices please use the ITSmobile to change
the UI to a WebBrowser based communication.
After that use a Windows CE mobil device to use the tx on the mobile clients...
(a browser must be use - often the device producers have own browser on the system like IBrowse or PocketBrowser)
What OS is installed on your mobile device???
Let me know if this answers your question.
Bye
Christoph

Similar Messages

IDoc Split with out BPM using SplitByValue at the LineItem Level

I have an Invoice idoc contains line item and identifier changes into groups, let's say A & B
Using Message Mapping, Will i be able to Split into 2 IDOCs and combine A into one IDOC and B into Another IDOC and send it across to ECC with out using BPM?
Btw the header is commom for both the IDOCs
Source
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>B</item2>
<item3>A</item3>
<item3>B</item4>
</item>
</lineitem>
</header>
Target
IDOC 1
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>A</item1>
<item2>A</item2>
</item>
</lineitem>
</header>
IDOC 2
<Header>
<headertext>headername</headertext>
<lineItem>
<item1>B</item1>
<item2>B</item2>
</item>
</lineitem>
</header>
Any inputs are appreciated

I actually gave wrong information on the source structure, I am trying to execute scenario with the given examples, meanwhile any help is appreciated
<Header>
               <Date>20100112</Date>
               <Amount>10</Amount>
               <No>20</No>
</Header>
            <InvoiceItem>
               <Line1>10</Line1>
               <Line2>10</Line2>
               <Amount>10</Amount>
               <ActionIndicator>I</ActionIndicator>
            </InvoiceItem>
            <InvoiceItem>
               <Line1>20</Line1>
               <Line2>20</Line2>
               <Amount>20</Amount>
               <ActionIndicator>C</ActionIndicator>
            </InvoiceItem>
            <InvoiceItem>
               <Line1>30</Line1>
               <Line2>30</Line2>
               <Amount>30</Amount>
               <ActionIndicator>I</ActionIndicator>
            </InvoiceItem>
            <InvoiceItem>
               <Line1>40</Line1>
               <Line2>40</Line2>
               <Amount>40</Amount>
               <ActionIndicator>C</ActionIndicator>
            </InvoiceItem>
Target 1
<Header>
               <Date>20100112</Date>
               <Amount>10</Amount>
               <tNo>20</No>
               <ActionIndicator>I</ActionIndicator>
</Header>
               <InvoiceItem>
               <Line1>10</Line1>
               <Line2>10</Line2>
               <Amount>10</Amount>
            </InvoiceItem>
            <InvoiceItem>
               <Line1>30</Line1>
               <Line2>30</Line2>
               <Amount>30</Amount>
            </InvoiceItem>
Target 2
<Header>
               <Date>20100112</Date>
               <Amount>10</Amount>
               <tNo>20</No>
               <ActionIndicator>I</ActionIndicator>
</Header>
               <InvoiceItem>
               <Line1>20</Line1>
               <Line2>20</Line2>
               <Amount>20</Amount>
            </InvoiceItem>
            <InvoiceItem>
               <Line1>40</Line1>
               <Line2>40</Line2>
               <Amount>40</Amount>
            </InvoiceItem>
I know the part of Splitting IDOC, which was executing correctly, with the external data type changes. Please advice

Firefox takes minutes to allow me to add or use bookmarks thru the top level menu on mac - so i want to remove 'bookmark' from the pulldown list - cannnot figure out how to do it.

now instructions available for customizing the top mac window when firefox is selected.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Display the technical name of the last level of the hierarchy

Hello,
I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
Please Advice,
David

David,
Check the below possibilities.
1. You can do that in a workbook.
2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

I want to be able to totally block the FaceTime functionality in my home network. I would like to do this at the router level. Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime? Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

How do I find iPod's MAC and the encryption level used to login?

I have a wireless network with WEP security Wireless Encryption Level 128 bit and also Wireless Network Access activated.
I need to add the MAC of the iPod. How do you get the iPod's MAC?
Also how do I know iPod is using 128 bits instead 64bits in the encryption level?
Does anybody know this?
I cannot connect to the network I disabled the Wireless Network Access and still cannot login, the password is correct and I am thinking that the iPod is using 64 bit with WEP which is totally useless when you have a network already configured.
I will appreciate your help.

Hello and Welcome to Apple Discussions.
You'll find the +iPod touch's+ MAC address in Settings > General > About > Wi-Fi Address.
The +iPod touch+ will use 128/40bit WEP depending on what you have the router set to.
Are you entering the password in the correct case? You may need to put $ infront of your password.
Merry Christmas
mrtotes

How to Use different icons for JTree in the same level

Hi guys, i come cross a problem with JTree. The module need a JTree which need to represent items in the same level using different icons. For example:
[Icon for Root]Root
|
|_____________[Icon for Table] TABLES
|
|_____________[Icon for Index] INDEXS
|
|_____________[Icon for Views] VIEWS
As i know, the default behavior for JTree is using the same icon for all leaves and
the same icon for all node that has children. How can i achieve that?
Thansk a lot!

subclass DefaultTreeCellRenderer. if you overwrite the method below, then you can set the icon to whatever you want....!
    public Component getTreeCellRendererComponent(JTree tree, Object value,
                                boolean sel,
                                boolean expanded,
                                boolean leaf, int row,
                                boolean hasFocus) {
     String         stringValue = tree.convertValueToText(value, sel,
                           expanded, leaf, row, hasFocus);
        this.tree = tree;
     this.hasFocus = hasFocus;
     setText(stringValue);
     if(sel)
         setForeground(getTextSelectionColor());
     else
         setForeground(getTextNonSelectionColor());
     // There needs to be a way to specify disabled icons.
     if (!tree.isEnabled()) {
         setEnabled(false);
         if (leaf) {
          setDisabledIcon(getLeafIcon());
         } else if (expanded) {
          setDisabledIcon(getOpenIcon());
         } else {
          setDisabledIcon(getClosedIcon());
     else {
         setEnabled(true);
         if (leaf) {
          setIcon(getLeafIcon());
         } else if (expanded) {
          setIcon(getOpenIcon());
         } else {
          setIcon(getClosedIcon());
        setComponentOrientation(tree.getComponentOrientation());
     selected = sel;
     return this;
    }

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Azure File Storage - Creating a directory at the root level using REST

I have a Xamarin / iOS project, and looking to use Azure File Share as a back-end.
With that in mind, I'm playing around with the REST API and have generally got things working with (a) Blobs and (b) Account-level access to Files.
Specifically, I can successfully request a list of File Shares, so I have the general call structure worked out.
However, I'm stumped about the exact incantation necessary to create a new directory at the root level of a share.
I've tried the following three variants, but all result in Forbidden - Server failed to authenticate the request
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/subdirname1
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:07:25 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/subdirname1\nrestype:directory
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/subdirname1/
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:07:58 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/subdirname1/\nrestype:directory
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare//subdirname1
request.Query: ?restype=directory
string to sign: PUT\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:06:16 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare//subdirname1\nrestype:directory
I did note that trying to get the contents of an (empty) root directory doesn't behave quite the way I'd expect
request.Host: myaccount.file.core.windows.net
request.AbsolutePath: /myshare/
request.Query: ?resttype=directory&comp=list
string to sign: GET\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 16:23:17 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare/\ncomp:list\nrestype:directory
Authenticates OK, but generates FAILURE BadRequest - The requested URI does not represent any resource on the server.
Which is different behaviour from pulling the list of blobs from an empty container (returns 200 with an empty xml list of blobs.
I've been through the File Service REST API document (dn167006) and found the azurestoragesamples on codeplex, but the former is unclear on working with the root level and the latter is from 2011 and predates File Storage.
Any insights?

First, thank you for the quick response and the suggestion about looking at the response content for the string to sign being used. I wasn't aware of that and obviously it's a fantastic resource for figuring this kind of stuff out.
And what it immediately revealed is it wasn't some subtle oddity in my construction of the STS, it was that I was doing a client.GetAsync(...) and not a client.PutAsync(...). DOH!
With that sorted, it was trivial to fix.
In terms of the List Directories and Files, though, there's still a problem.
FAILURE BadRequest - The requested URI does not represent any resource on the server.
   request.Host: myaccount.file.core.windows.net
   request.AbsolutePath: /myshare
   request.Query: ?resttype=directory&comp=list
   urlQuery: myshare?resttype=directory&comp=list
   string to sign: GET\n\n\n\n\n\n\n\n\n\n\n\nx-ms-date:Sun, 30 Nov 2014 18:40:04 GMT\nx-ms-version:2014-02-14\n/myaccount/myshare\ncomp:list\nresttype:directory
The response XML is
<?xml version="1.0" encoding="utf-8"?>
<Error>
   <Code>InvalidUri</Code>
   <Message>The requested URI does not represent any resource on the server.\nRequestId:33d61aed-001a-0020-0cbd-51aea8000000\nTime:2014-11-30T18:40:04.9712797Z</Message>
   <UriPath>/myshare</UriPath>
</Error>
I originally thought it might be because the share was empty. However, I'm targeting the same share in which I created (apparently successfully) the subdirectory.
So I'm still confuzzled on that.

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

How to get BOM compoents at the lowest level using BOM tables?

I am doing a report based on CK13N wherein i hav material and plant as the selection parameters and based on that i get the product costing of the entire BOM.
I pass material to MAST.get the BOM num and usage
Pass it to STAS and get STLKN (ITEM NODE NUMBER)
After that i pass STLKN and STLNR(BOM number) to STPO to get the BOM subitems based on UPSKZ(Sub items indicator). But that fails because UPSKZ is nt set for all the assemblies.
So hw do i get the BOM components at the lowest level USING these TABLES

Ashwin
1) As Taj Said, Sub item is not actually a item or component.
2) The sub item number what we are viewing the sub item sceen will be 001,002 like ,it not mean any item
3) For Example a car has 4 wheels, so the item/component description is WHEEL
4) The BOM Quantity of wheel is 4
5) In BOM General item over view, you can select the wheel then click subitem
6) This will lead to sub item screen
7) There you can see subitem 001,002,003 then installation point,subitem text,qty etc
8) Against installation point you can decalre Front Left,Front Right,Rear Left,Rear Left
9) Against sub item text,qty you can declare Front Left wheel-1,Front Right wheel-1, Rear Left wheel-1, Rear Right wheel-1 no
9) This does not mean there are addition Sub items for wheel (ie) additional BOM component)
10) Just declaring the positions for fitting in the car to ease the Assembly Person for fixing the wheel
11) So if you get the cost for WHEEL as assigned in BOM item then ok, don't worry about sub item cost
Reward me if my answer is helpful
K.Prabakaran

How to enable Rosetta at the system level using the command line?

I need to find a way to enable Rosetta at the system level (e.g. all users) using the command line. When Rosetta is enabled, the following entry is created in ~/Library/Preferences/com.apple.LaunchServices (run defaults read com.apple.LaunchServices)
LSPrefsFatApplications = {
"com.apple.Safari" = (
<00000000 009a0003 00010000 c323458f 0000482b 00000000 00000023 0000727b 0000c2b0 8b4e0000 00000920 fffe0000 00000000 0000ffff ffff0001 00040000 0023000e 0016000a 00530061 00660061 00720069 002e0061 00700070 000f0014 00090053 00650072 00760065 00720020 00480044 00120017 4170706c 69636174 696f6e73 2f536166 6172692e 61707000 00130001 2f00ffff 0000>
Does anyone know what the data shown here is? It doesn't change when Rosetta is turned off and then back on. It also doesn't change between user accounts (e.g. joe's com.apple.LaunchServices.plist has the same value as jane's).
Will it be possible to run defaults in a way that makes this change work for all users of the computer?

I am asking about the option to run in non-interactive modeIt cannot be done. Check "Oracle® Applications Maintenance Utilities Release 11i (11.5.10.2)" manual for more details.

Crrystal Reports using ADO. How do you Change the Isolation Level?

Post Author: jmetaxas
CA Forum: Data Connectivity and SQL
Crrystal Reports using ADO. How do you Change the Isolation Level? I found a knowledge base article that allows you to change it for ODBC. But nothing on ADO. I kicked around changing the reports to ODBC but even then the keys described in the article do no exist. Any suggestions?
Thanks,
John Metaxas

T-Bob wrote:
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
As usual, much easier to DO it, rather than describe it!

Is it possible to use some product on the unix server at the development level which would make it p

Hello,
We are generating editable PDF forms from the scratch at the development level on the unix server. Is it possible to use some product on the unix server at the development level which would make it possible to save these editable PDF forms to be saved using acrobat reader? These forms are used by the end users and the edited files are then saved... Kindly help me in this regard..
Best Regards,
Deepak

Dear Aandi,
I am really thankful to you for this. I will suggest this to the business and then they can contact adobe for this. Thanking you once again for providing me with all the valueable info. You have been instrumental in helping me out in my project.
Best Regards,
Deepak Goyal

Is it possible to use virtual chars in the aggregation level?

Hello,
Is it possible to use virtual chars in the aggregation level?
thanks

Hi.
See answer of Mr. Gregor Dieckmann in [this topic |BI-IP: Copy planning function from virtual key figure;about virtual KF.
Regards.

Using RF at the IM level

Similar Messages

Maybe you are looking for