Using Right Click on Magic Mouse in Dreamweaver

I am using Dreamweaver CS4 Version 10.0 on an Intel iMac with a Magic Mouse
Everything will be going swimmingly and then without warning, on a rightclick the whole shooting much shuts down saying that a message will be sent to Apple, I am unable to use Dreamweaver again until I restart.
Anyone having the same problem?
Any ideas?
Thanks

Here is what worked for me. My scrolling on the mighty mouse and a few buttons on my wireless keyboard weren't working properly. I reset the SMC, a link explaining the process is below. Hope it helps you too!
http://support.apple.com/kb/HT3964

Similar Messages

Right click on Magic Mouse not working

Hi
I am having this right click problem with my magic mouse. The right click function just suddenly stopped working two days ago.
I have checked the Mouse>Preference> Secondary click is enabled to "Right"
However, when I changed the secondary click to "Left", the "right click" function works perfectly fine w/ the left click, but when I change it back to "Right" nothing happens. I even tried unchecking the secondary click function (someone said that will work in another support site) but that doesn't help either.
I have tried removing batteries from my mouse, turning it off, turning bluetooth off, restarting the laptop...
Very confused right now. Please help!!

The post is a month old now, but I did stumble upon it after I suddenly lost my "Magic Mouse" right click functionality. Just as posted my; Mouse>Preference> Secondary click was enabled to "Right", though it would not work...
I tried everything including; restart iMac, enable and disable "Secondary Click", disconnecting the Mouse bluetooth and reconnecting it using my Magic Trackpad, etc.... until this ended up being my solution:
I went into System Preferences, Mouse>Preference> and disabled "Secondary click". Then restarted the system. Then returned to System Preferences, Mouse>Preference> and re-enabled Secondary Click. That worked and was my solution and has been working fine since yesterday.
I hope this helps anyone who encounters the same as we have.

Right-click on Magic Mouse and Volume Controls on Wireless keyboard suddenly stopped working

I am running Mavericks 10.9.2 on an Late 2012 iMac.
One morning the right click on my Magic Mouse and the volume controls on the wireless keyboard stopped working.
These mouse and keyboard themselves seem fine; they work okay ehn used on a MacBook.
Everything else about the mouse and keyboard is fine.
This seems to be a problem what has been around for a whole, with a wide variety of solutions.
I have read
https://discussions.apple.com/message/16799039#16799039
https://discussions.apple.com/message/23474052#23474052
https://discussions.apple.com/message/19660884#19660884
and have tried
Clicking on and off the 'right click' checkbox in the Mouse System Preferences - No effect
Deleting /Library/Preferences/com.apple.Bluetooth.plist - No effect
Restarting in Safe Mode - When starting in safe mode, the computer crashes out and restarted
Resetting NVRAM / PRAM - Is it CTRL+CMD+P+R or CMD+OPT+P+R ? Neither work for me (I do try it using a wired keyboard, but never get the double chime)
Upgraded to 10.9.2 - no effect
Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext and and back in (and re-authenticate) - No joy
Moved the /System/Library/Extensions/AppleHIDMouse.kext and AppleHIDKeyboard.kext from a working MacBook on same OS - Made the keyboard misbehave even more
Has anyone got any other cures for this?
Thanks in advance.

Here is what worked for me. My scrolling on the mighty mouse and a few buttons on my wireless keyboard weren't working properly. I reset the SMC, a link explaining the process is below. Hope it helps you too!
http://support.apple.com/kb/HT3964

Why cant i use right click on the mouse

I am trying to play starwars empire wars for the mac, is says left click to high lite a unit, and right click to move them but the right click dosent work like the PC.
HELP any advice would be much appriciated
thanks in advance

If you are using a mouse, try using Control-click to get the right click function. If a Magic Mouse, go to System Preferences > Mouse and check the box for secondary click, that is the right click enabler.

Why does File send link not work? Even right clicking on my mouse doesn't work. Is there a fix for this?

Why can I no longer send links to websites? Clicking File>Send Link doesn't work nor does right clicking on the mouse. Both worked prior to Firefox 6. I also can't send emails to websites that don't spell out their address but instead say "to send an email click here". Everything works fine in Chrome and Safari but not in Firefox.

OK well after first reverting to an older version of firefox to get my right click menu options back I have since discovered one way that works but at a cost.
By using the addon menu-editor it is possible to move the EMAIL LINK button from the file menu to the (Main Context Menu) ie the "right click menu" BUT you will loose the file menu button as there is no way to clone the button and only move a copy. Bunch of clowns that decided to do this I really don't know what they were thinking. Very VERY stupid move.
Here is a link to the only option that works https://addons.mozilla.org/en-US/firefox/addon/menu-editor/
Can you fellows/chaps  at least provide a clone and move option in the menu-editor?

With version 3.6.3 I can no longer do a right click with the mouse and check the properties of a live url link on web pages

Windows XP Pro, SP3. Firefox 3.6.3. Ever since updating to this version a few weeks ago I can no longer do a right click of the mouse and check the properties of an active url link on webpages. I've always had the option before. I want this feature back!!!!

In Firefox 3.6 Properties has been removed from the right click context menu.
You can use ''View Image Info'' or ''View Page Info'' in the right click context menu to see the (image) properties.
You can use the above mentioned extension (Element Properties 6) to get that context menu item back.
See also Link And Forminfo: https://addons.mozilla.org/firefox/addon/6939

Ever since I installed the most recent Firefox, might right clicker on my mouse does not work. How can I fix this?

When I log into Microsoft Outlook Web Access. I've always been able to use the right clicker on my mouse. Since I installed the new Firefox, I have not been able to use my right clicker. Any suggestions? Thanks.
== This happened ==
Every time Firefox opened
== I installed the new Firefox

Please can you be more specific as to what the issue is, when does it occur? Any error messages? every bit of information would help.

How do I right click without a mouse?

How do I right click without a mouse?

If you don't like the two finger tap (I don't - it doesn't seem to work consistently) you can asign one corner as a right-click or simply use the control click with one finger on the bottom (which is what I do, usually - just a habit left over from the old days).
Clinton

How do I use Right Click Functionality in Captivate 5

Hello there,
I am trialing Adobe Captivate 5, with a view to purchasing it, and I have been loving it, but have hit a snag. My Right Click actions are not working except with the web preview. I noted from the manual a lot of restrictions and from reading here I am not able to change AS3 to AS2. Does this mean Captivate 5 does not let you use Right Click options.
I would greatly appreciate your help because I do love this software but if I can't create elearning with multiple Click Boxes and Right Click functionality, I may have to look elsewhere.
Thanks again.
Penny

Rodward,
I downloaded and unzipped the file you linked. On my work laptop with XP, IE 8, and Captivate 4, it ran perfectly.
On my personal laptop with Windows 7, IE 8, and Captivate 5, it did not run. (I got the JavaScript line 81 error.)
On my personal laptop, I created my own right click project in Captivate 5, published with accessibility turned off, and it would not run (line 81).
I copied my Captivate 5 published files to my work laptop, and it would not run there either.
I don't have any third party toolbars installed on either machine. I'm running Symantec antivirus on my work laptop (where your project worked but mine didn't) and AVG on my personal laptop (where neither project worked.)
Is there something you did in your JS file? Or some little tweak you made in your Captivate project?
Doug

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL..

Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Problems using right click to open in new Tab or Window. Will not work. How do you solve this. Have v5.0 installed.

I have the latest version of Firefox installed. Version 5.0.
When searching on Google and use right-click to open in new tab or window. Keep getting blank tab.
Can somebody advise how to solve this.
Thank you.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to know the sales order closed using right click menu -Close ???

I have an sales order with ten item, I have copied the same to delivery and before adding the Delivery I have deleted some items. After adding the Delivery, I manually closed the sales order by using the "right click menu close".
The Open Quantity of those lines are already closed while i Close it manually.
Now i need a report regarding the sales orders which i have closed manually. Any Options??

Check the below result
DocNum     DocDate     CardCode     CardName     Row#     ItemCode     Dscription     Price     Quantity     LineTotal
2     2012-02-04 00:00:00.000     ED-C-102     AI HUDHA BOOK STALL     2     1010          150.000000     10.000000     1500.000000
3     2012-02-04 00:00:00.000     ED-C-103     AL AMEEN ENGLISH SCHOOL-MANKADA     2     1011     ZINC ROD HIGH GRADE PURE ZINC 140 X 9 MM     59.790000     10.000000     597.900000
this is the result i get while i execute your query
but look at the db result
DocEntry     LineNum     TargetType     TrgetEntry     LineStatus     ItemCode     Quantity     OpenQty
1     0     15     2     C     1010     10.000000     0.000000
2     0     15     3     C     1010     10.000000     0.000000
2     1     -1     NULL     C     1010     10.000000     0.000000
3     0     15     4     C     1010     1.000000     0.000000
3     1     -1     NULL     C     1011     10.000000     0.000000
3     2     15     4     C     1012     15.000000     0.000000
3     3     15     4     C     1013     20.000000     0.000000
4     0     15     5     O     1010     10.000000     5.000000
See the last line data...it have open quantity of 5 and it also have the target type 15, If I close the sales order with docentry 4 manually using right click, the open quantity will be Zero..
I need that last line result also as my output..
Hope you understand my problem.
Thank You

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.

My bridge pause all the time. I have to wait 30 seconds after selecting a picture or click the right button of the mouse. I have installed a new windows 8.1, and a fresh CD6. But still these problems in Bridge. No problems in Photoshop. What to do

What is the problem:
When I choose a picture in Bridge I have to wait 20 till 30 seconds (sometimes more).
When I choose with right click of the mouse. I have to wait the same time.
When I choose the menu. Also
After opening the picture(s) in Camera RAW. There are no problems
In Photoshop there are also no problems. Everything works all right.
Only Bridge have these problems. But I can’t work with it.
My Computer
HP Z820 with double     CPU Type           Mobile Intel Celeron M, 2000 MHz
Nvidia Geforce GTX 980 card
System memory 64 Gb
Windows 8.1 Home Edition
All software is up to date, incl BIOS
DirectX 4.09.00.0904 (DirectX 9.0c)
Lots of space on my disc drives
Software: Adobe Master Collection. But only installed Photoshop and Adobe Acrobat
Installation done with my original DVD of Adobe. All software updated
But still problems
Software installed again (including Windows).
Now installed adobe from a download version from adobe.
Still the same problems
I have no illegal software!
Multimedia
Geluidskaart     SB Recon3D PCIe Audio Controller
Opslag
IDE apparaat     Standaard Dual Channel PCI IDE Controller
SCSI/RAID apparaat       Controlefunctie voor opslagruimten van Microsoft
SCSI/RAID apparaat       Intel(R) C600 Series Chipset SAS RAID (SATA mode)
SCSI/RAID apparaat       Intel(R) C600 Series Chipset SATA RAID-controller
SCSI/RAID apparaat       LSI Adapter, SAS2 2308 Mustang
Harde schijf       ATA Samsung SSD 850 SCSI Disk Device
Harde schijf       ATA SAMSUNG SSD 830 SCSI Disk Device
Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
Harde schijf       SEAGATE ST3450856SS SCSI Disk Device
Optische Station             HL-DT-ST BD-RE BH16NS40
Optische Station             hp DVD-RAM GHA3N
SMART Status harde schijf         Onbekend
Partities
C: (NTFS)            243668 MB (150173 MB vrij)
D: (NTFS)            122101 MB (65332 MB vrij)
E: (NTFS)            429244 MB (322019 MB vrij)
F: (NTFS)            429244 MB (243491 MB vrij)
Geheugencapaciteit       1195.6 GB (762.7 GB vrij)
Invoerapparaten
Toetsenbord     Logitech HID-Compliant Keyboard
Toetsenbord     Standaard-PS/2-toetsenbord
Muis     HID-compliant Mouse
Muis     Microsoft PS/2-muis
Netwerk
Netwerkkaart    Intel(R) 82574L Gigabit-netwerkverbinding (192.168.178.37)
Netwerkkaart    Intel(R) 82579LM Gigabit Network Connection
Peripherieapparaten
Printer Adobe PDF
Printer EPSON XP-950 Series
Printer HP 4730 PCL 6
Printer Microsoft XPS Document Writer
USB1 apparaat Texas Instruments USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
USB2 apparaat Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
Van: station_two
Verzonden: maandag 13 april 2015 21:58
Aan: johan van der klaauw
Onderwerp: After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
After several time installed CS6 and a clean Windows 8.1 bridge still pause after selecting a picture or right click with button mouse.
created by station_two <https://forums.adobe.com/people/station_two> in Bridge General Discussion - View the full discussion <https://forums.adobe.com/message/7434796#7434796>

Why does system preferences not pop up after 2nd time accessing it using right click on desktop?

Any help? Genius bar was stumped. I reinstalled mt. lion, but it still persists. Thanks.

Your question is very confusing ... especially "after 2nd time accessing it using right click on desktop".
"Using right click" -- why would you do that? What are you right clicking?
"On desktop" -- does that mean on a vacant area of your desktop?
Anyway, a quick way to System Preferences is to simply click normally on the System Preferences icon in the dock, which looks like this:

Using Right Click on Magic Mouse in Dreamweaver

Similar Messages

Maybe you are looking for