Using rms on a mobile phone

I am having troubles using the rms. My app works fine on the emulators but when I upload it onto the phone it doesnt appear to do anything. If you know the reason please reply.

I am using the motorola i85s phone same emulator. The app runs without crashing. I try to save to a new database but it doesnt seem to work. It doesnt crash, just continues to the other parts of my program.

Similar Messages

  • Using labview applications on mobile phones

    Hello,
    I am interested in using LabVIEW applications on Mobile Phones. Kindly suggest how it could be used and which type of mobile phones are suitable it.
    Thanks

    Hi Intelligent,
    National Instruments has a Mobile Module for developing applications specifically for mobile devices.  Check out this article for supported devices: LabVIEW Mobile Module Software Requirements and Supported Devices.
    In addition, if you device runs Windows XP Embedded, you should be able to install the LabVIEW Runtime Engine and then run an executable built in LabVIEW.
    Have a great day,
    Chris V
    Applications Engineer
    National Instruments

  • Using HP ePrint with mobile phone internet connection

    Hello, I have a peculiar problem.
    I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
    I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
    What do I do?????????
    Can I just phone technical support and ask them to email my printer code??????
    This question was solved.
    View Solution.

    Jagaccountant wrote:
    ... Can I just phone technical support and ask them to email my printer code??????
    Hi,
    No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I use j2ee in gprs mobile phone?

    How can I use j2ee in gprs moblie phone?

    Actual mobile phone are unlikely to support J2EE themselves as this is mostly server-side technology.
    You can get phones though that support J2ME, these can the communicate with a server running J2EE technologies.
    I'm not sure however if any gprs phones yet support J2ME, and it also depends on where you live.
    Try looking in the devices section at www.microjava.com

  • HT2205 can isync be used for windows os mobile phone

    i got a mobile phone which run Windows os.  Can the said software be used for sync between the phone and Mac PC (os 10.7)?
    i get another Samsung mobile phone.  The Kier program, that released by Samsung, cannot find/connect the phone when using USB wire.  When using Wifi, the iCal cannot be sync.  What is a better soluction for this?

    The free one is on the Mark/Space website. I found it by:
    1>>Go to www.markspace.com
    2>>Click on PRODUCTS on the NaviBar
    3>>Below the "Choosing your phone for the Missing Sync", there is a bunch of links under the title PRODUCT SUPPORT. The last link (on the last line) of that bunch of links is FREE VERSION UPDATES.
    4>>I needed one for Windows Mobile. So I downloaded VERSION 3.1.0, and haven't used a serial code. It keeps asking me everytime I sync to get a serial, but I haven't. I just said "REGISTER LATER", and I have being getting away with it fine. I know it's illegal, but they offered it as a free version. Who can argue with that?
    (Don't answer that question!!)
    Hope this helps!

  • Can I use Ipad in other mobile phone operator's network in the world

    I am living in bangladesh and would like use a iPAD 2, i would like to use the iPAD in mobile opeator's network, which is a CDMA EVDO network. It would be very helpful for me if anyone can tell, is it possible to use iPAD 2 in any other CDMA network other than Verizon

    reply plz

  • LIghtroom on my mobile phone doesn't work anymore because the "trial" period is over. How do I fix this so I can use it on my mobile phone again?

    I'm just trying to get Lightroom to work on my mobile phone again......help.

    Hi Charles. please read this article...Lightroom mobile unavailable to Education memberships | Kivuto
    Creative Cloud memberships purchased from a third-party provider (e.g. Kivuto) do not provide access to Creative Cloud services, including Lightroom mobile.
    Guido

  • Use skype credit call mobile phone and the line wa...

    I use skype credit to calll oversea from Thailand but during this month the line was cut immediatly when they pick up the phone. The credit was cut also. Send to skype center but noone response, pls help.

    Hello and thanks for bringing this to our attention. I'll have it investigated.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Question: how to use JAVAEE to run the WAP program of mobile phone  on web?

    I want to develop a web program by JAVAEE. It uses the simulator of mobile phone to run the WAP program of mobile phone on web. You can operate the program on the page just as do on mobile phone. tell me how to develop on details soon. show the code, please.

    Haha, there's no way in hell you can do that. And nobody in their right mind would write the code for you, at least for free.
    Jesus with you people these days..."Java_Researcher". I bet you've never written a single line of Java.

  • Can i use my ipad 2 as a mobile phone?

    Am going to Korea soon, does anyone know if I can put a Korean sim card in it and use it as a mobile phone (I have the 3G ipad) ?
    FYI - I do well to switch the thing on, I'm not technically very good with IT stuff.

    You can use it for FaceTime (over wif) and Skype-type calls, but you can't do 'normal' phone calls with an iPad.
    FaceTime : http://support.apple.com/kb/HT4319
    Skype for iPad : http://itunes.apple.com/us/app/skype-for-ipad/id442012681?mt=8
    Skype help : https://support.skype.com/en-us/category/SKYPE_FOR_IPHONE/

  • Is it possible to use a Nokia mobile phone as a modem for my ipad2, which hasn't, got 3G. If so does anybody know how?

    Is it possible to use my Nokia X6 mobile phone as a modem for my Ipad2, which is not 3G enabled. If so how?

    You need to download something called JoikuSpot from the Nokia Store, they were giving it away free last week. You then follow the instructions to basically set up a little wifi hotspot, look at the settings carefully and create a password to get on it, by default it creates an open network so anyone can use it.
    HTH

  • Address Book and Bluetooth Mobile Phone

    Hi,
    I have been trying to use my bluetooth enabled mobile phone with the address book to dial numbers and send sms. I am using the Nokia 9500 and the Motorola Razr V3 BLK. But when I pair the phone with address book and click on the tab of the contact, address book loses the bluetooth connection and the Send SMS and dial number options are not highlighted.
    I have tried looking around for help, but haven't found anything. I would appreciate it if anyone could help me with this.
    Best Regards,
    Aditya

    This facility is usually dependent on your network
    I am in uk on Vodafone and it doesnt work here
    I use a small program called BluePhoneElite with the v3 and it handles sms and the calls very well
    They pop up on the powerbook screen and also the sms save to the powerbook
    thats the address you can get a free trial
    I paid the small amount and have been very happy with it
    Now I wish there was a program to handle landline calls
    I am just a happy customer nothing to do with the company before anyone asks!
    http://www.reelintelligence.com/BluePhoneElite/

  • How Android v4.0 mobile phone connect to i-mac 10.7 ?

    Hi,
    I am using android v4.0 mobile phone.  when I connect my phone to i-mac 10.7, my i-mac can't dectect
    my phone? Actually, I need to transfer my photos from my i-mac to phone , How can I do that ?
    Thanks.

    Hi ,
    The solution that get me going is  as below:
    The steps to add printer is via http://localhost:631
    1.    From Safari, go to localhost:631 to enter cups (note proxy settings may need to be changed to allow this)
    2.    choose Administration tab
    3.    Add printer
    4.    System asks for password ---- this is the username & pwd for MAC Account (Checkbox not to be ticked for remember option)
    5. Choose smb option - Windows printer via spools
    6.    Printer address : queue name as  smb://servername.domain/queuename
    7.    Printer name –Not to have any space between words (HPCP5225dn—all one word)
         8. Choose the driver on next screen and  on the one after set printing defaults.
    When set up this way, the test page for the printer may NOT work first time. Open Word or another application and print a document, you will then be asked to authenticate. Enter userid and password only (ie not domain\) and printing will work.
    If you save the username and password it is saved in the User keychain - as it is per user it is OK to save and it won’t ask for authentication again.
    Thanks for your help and support.
    As of now I am facing another trouble while configuring the printer via server on 10.6.8.
    1.If I use the same method as used for 10.7 , the job goes to Hold and asks for authentication  and in this case the username is domain\username but problem is that I am unable to save it in the keychain.
    So everytime a job is sent ,it goes into hold and resuming the job asks for authentication.
    2. If I go via system preferences to add printer --it comes up with some NT_Status_Log-on Failure message or NT_Status_Bad_Network name.
    Please suggest any inputs to work on.

  • There's a contact with my name and mobile phone wh...

    Hi everyone!
    Over the last days it appeared among my contact a new one with my same full name, a random personal pic and my mobile phone shown for calls. ...but that's not me!
    I didn't add my mobile number to my Skype profile and I have never used Skype to call mobile phones. So how is this possible then? Who's this person? Was my account hacked or what else is it? What shall I do to protect my mobile number from being public? 
    Thank you in advance for your support.
    L.

     Hi, Lullu, and welcome to the Community!
    First things first: change your account password immediately.  Then, check your profile settings, make the necessary changes, click the "Save" check-marks beside each line item, and check your Skype Options to ensure all settings are on "My Contacts Only;" remember to click Save before you leave each window (sometimes I forget this simple step!).
    Here is more information for you to consider:
    https://support.skype.com/en/faq/FA10920/What-can-I-do-if-someone-has-taken-over-my-account
    Here is a link to contact Skype Customer Service:  contact customer service
    Best regards,
    elainem77
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How to upload Generic j2me applicaton tested on Suns WTK  to mobile phone

    Hi,
    Pls help me on how to upload a Generic j2me application tested/working on suns WTK to a mobile phone...
    Example how to install Audiodemo located at the /WTK22/apps into my mobile...Assuming I am using a Nokia/Ericcson mobile phone...
    If anybody knows steps or ways/options on how this is done please let me know...
    Thanks in advance
    Regards,
    Psyeu

    Thanks guys for the info...Actually I'm currently
    using infrared port...err... forgot that thing (kinda obsolete thing to me though)...
    On the other hand, your solutions is almost
    similar...yes... but strange.. how u find that out !!!!
    just kiddin...

Maybe you are looking for

  • Why does my safari run slow with DSL?

    I recently had to change to DSL internet, and my macbook safari does not do well with it. I cannot seem to open more than one internet tab at a time, videos do not load, slow loading time for searching. Is there a way to fix this to where my safari i

  • Can i  use Two DSO 's in Function module

    hi experts, Can i  use Two DSO 's in Function module  .That FM is used for Layout I actually  want to  fill one DSO Refering the Data in Another DSO. Regard Naresh.

  • Adding Music Videos or TV Shows

    Hi there, just a quick question here, when you add mvids or tv eps from your pc to the library, it doesn't matter where you drag them they always go to movies by default and you have to assign their categories one by one to either mvid or tv to get t

  • 50.5 Fuser Error with new fuser installed

    Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

  • SAP CO (Management Acct.)Certification Exam-SAP ERP Central Component 6.0

    Hi Can someone please advise me as to where I can obtain the SAP CO (SAP ERP Central Component 6.0) certification exam questions and answers. I have the CO files, but only require certification exam questions or even the exam simulation, to help me i