Using/ Running App harmful to fully charged and plugged in?

Hi,
A quick question.
Is running an app while my batt is fully charged and still plugged in harmful to my iphone 4s battery?
Will the rate of wear and tear of the battery therefore be increased or will the power source be directed away from the battery and into the circuit board directly.
Thank You for your time and replies.

When the iPhone battery is fully charged power is no longer directed to it. You will do now harm, just make sure to do a full charge cycle at least once per month.

Similar Messages

  • Is it ok to using iPhone when it's fully charged and plugged in?

    I wonder if after my phone is fully charged and still plugged in, can I use it normally? Does it harmful to the phone and battery?

    leon_123 wrote:
    So, if it use from battery and then filled by charger continously, I don't think I should do that for a long time.
    No worries.
    Read here for info on battery: http://www.apple.com/batteries/

  • Keep using when fully charged and plugged in?

    I was wondering if i can continue to watch netflix while my MBP is fully charged and plugged into AC power. Does this hurt the battery, or should I be okay? Any answers are greatfully accepted!!
    Thanks!!

    rachelleco wrote:
    P.S. WIll it still be okay for a few hours at a time? I typically watch for 2-3 hours at a time
    Leaving it plugged in is much better for the battery (as long as it's not overheated) than unplugging it and letting it empty out frequently. I leave mine plugged in for the entire work day, unplugging only to transport it in the morning and evening, and after over a year it still has 97% of its original capacity.
    Also, on the Apple laptops that have non-removable batteries, Apple says there is no need for the "completely discharge once a month" calibration procedure. In other words, if you have a newer Apple laptop where the battery can't be removed, those are essentially maintenance-free. You just use it.

  • My MacBook Air won't turn on, despite being fully charged, and plugged into the power jack.  What should I try?

    I double checked the power connection, it's good.  The charge light is green, so it should be charged and turn on, right?  When I push the power button--nothing no startup sounds, nothing on the screen, keys don't light up.  It's completely dead, as if it is powered off.  I don't know if this could be having an effect on it...I upgraded to the latest operating system (Yosemite) a couple of days ago. After that, it wouldn't recognized our Epson WIFI printer.  The printer was visible as an option under print, but when selected there was a message saying it wasn't connected.  Even after going through the steps to add it agaiIn, after printing one document, then trying to print the next, the "printer was not connected" again. I gave up and shut it down for the day. Used it last night without any issues (except for being unable to print.). Now, this morning, nothing.

    Try a SMC reset:
    http://support.apple.com/en-us/HT201295
    Ciao.

  • My nano is fully charged and when I use the earphones it comes with, the nano stops playing my music after a few seconds and turns off.  But when I use another earphone, it's okay and stays on. How do I keep the nano from turning off after a few seconds?

    Why does my nano keep turning off after a few seconds while I'm listening to my music?  It's fully charged and brand new.

    I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
    My computer meets the requirements.
    All software (Windows, iTunes and QuickTime) are up to date.
    As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
    My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
    As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
    As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
    'Readyboost' was already set at 'Do not use'.
    No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
    The problem still exists. Please help.

  • I was using my ipod touch and it was fully charged and it shut off and it wont bring me to the home screen

    i was using my ipod touch and it was fully charged and it shut off on me and when i go to charge it all it shows is the apple sign

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I want to know what happens when the iPad battery gets fully charged and the charger is still connected

    When the battery gets fully charged, and the charger is still connected to the iPad, does the iPad use power from the battery or does it use the charger?

    Install Battery Doctor and see Battery Status or Charging
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    System Status will indicate charged when charging circuit is disabled
    http://itunes.apple.com/sg/app/system-status-activity-manager/id401457165?mt=8&l s=1

  • I have 4GB ram running 10.7.5 . Would installing Mavericks make it easier to run apps such as VMware,Xcode and ADT(Eclipse)?

    I have 4GB ram running 10.7.5 . Would installing Mavericks make it easier to run apps such as VMware,Xcode and ADT(Eclipse)?

    I fully agree with Barney-15E above.
    Well if you are entertaing the idea why not up grade the OS
    Then see for yourself how you use your Mac.  You can always upgrade at that point.
    RAM is the best bang for your buck.
    OWC  http://www.macsales.com/
    Crucial  http://www.crucial.com/
    System requirement fot Mavericks actually designate 2GB minimium:
    http://support.apple.com/kb/ht5842

  • After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager  and zapping the PRAM have failed to permit startup. What else can I try?

    Startup – Black screen with cursor
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • I bought a used 2nd generation ipod touch fully charged not working shows a usb going up to music symbol itunes what could be wrong please help thanks

    i bought a used 2nd generation ipod touch fully charged dosent work shows a usb cord going up to itunes music symbol please help

    The screen is telling you to connect the iPod to your computer with the USB cable and restore via iTunes on the computer.
    iTunes: Restoring iOS software

  • When my battery is fully charged and i remove the power lead the computer shuts down

    When my battery is fully charged and i remove the power lead the computer shuts down, evan when the power lights are fully green on the charger and the battery pack indercating lights.
    Regards

    I have exactly the same problem, which started again yesterday; coincidentally the day my warranty ran out!
    The situation is complicated for me because I live in rural lincolnshire, but was in London all summer and had a new logic board replaced under warranty last month at the London- Stratford store.
    It seems the £400 logic board replacement didn't fix it. When I try to get support, the website just laughs at me and holds out the cup for more money.  I had a chat with somebody in the store this evening and I've got to take it into a store AGAIN!
    Perusal of the 'Support' pages turns up literally thousands of people who have this or similar faults, all the way back to 2006, and I've not seen anything yet indicating that Apple have got a grip of it.
    I've been using Apple kit for 16 years now and I've never had any trouble until now, but this bloody laptop, which is no better than my iMac now for portability  has let me down badly several times in the last 6 weeks.
    I'm really hacked off with this, get your **** together Apple!

  • Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

    Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
    It has only happened for the last month or so
    Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

    Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

  • My iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    Reset the phone like the manual says:  hold the on/off switch and the home button simultaneously until the Apple logo appears.  May take up to 30 sec

  • My iphone was fully charged and now it won't turn on or do anything

    My iphone was fully charged and now it won't turn on or do anything

    I'm sorry, it seems that the problem is that my phone WON'T restore. I just tried restoring again and it keeps giving me the 2001 error. Help.

  • Hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success

    hi my iphone was fully charged and turned its self off, i have tried to turn it back on and reset it, but no luck so i have plugged it in to my pc and it displays the apple logo and then goes back off i have tried this a number of times with no success anyone got any idears?

    Try here:
    iOS: Not responding or does not turn on

Maybe you are looking for

  • Dynamic Page Orientation in Reports 6i

    I have the following requirement. I need to print a letter that contains an attachment. The letter is two pages long and the page size letter and orientation is portrait. The attachment is legal but the orientation is landscape. So what it essentiall

  • Passing Internal Table to a Function Module.

    I am new to Web Dynpro Abap. Using the Function Builder, I am trying to pass an Internal Table (IT) as an import parameter into my Function Module (FM), fill it within the FM and be able to recieve the filled IT back as an Export parameter from the F

  • Workflow with two machines

    Just wondering how people out there manage working from two machines. I have an MBA that I take on the road and use when I'm sick of my office and want a change of scenery. And, I work on an iMac at my home office. I'm new to Aperture, and am wonderi

  • How to list all the notes

    HI, Is there some way to report o list all the notes for all account or contacts? thanks

  • Table for user's default data

    HI all, Is there a table to find out the 'date format' of the users in BW/ BI? Regards, Adarsh