Using same Bank & GL for another bussiness area

Dear Sir,
We had Assign  Saraswat Bank to 1201  business area now Management had decided to closed the plant 1201, hence we would like to  use same bank to new business area 1203,  how to configured it please help.
Regards
BK GAIKWAD

Hi,
Use transaction FBZP
Go into Bank Determination
Select your company code and go into Bank Accounts where in last column you will see Business Area
Regards,
Chintan Joshi

Similar Messages

  • Using Same Bank Account for two different company code

    Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
    Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

    The system will allow the same ABA and bank account on two different company codes.  However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes.  The EBS program uses the house bank/account ID tables to assign a company code to the bank statement.  If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
    Regards,
    Shannon

  • Do we use same bank accounts in APP and BRS

    do we use same bank accounts in APP and BRS

    Hi pragnesh,
    It is basic criteria, u need to maintain same bank accounts for APP and BRS, after all what is APP, you are paying amount from your bank account for which the Bank will send the statement for your accont mentioning the various transactions. There is a link between APP and BRS, what ever house bank u r created in FI12, the same needs to be assigned in FBZP (APP configuration) under bank determination.
    Hope u understood.
    regards
    srikanth

  • Can we use same Business Service for Sender and Receiver

    Can we use same Business Service for Sender and Receiver

    Hi
    In addition to the above infomation explaining about the Business Service..
    Business Service: Address an abstract business entity as the sender or receiver of messages.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    The business services are used when configuring cross-company processes also..
    regards
    Kishore

  • How to use same RESULT SET for two different events

    hello friends,
    I need to use same result set for two different events. How to do it.
    here My code,
    private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
    // TODO add your handling code here:
    try
    String selstate,selitem;
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
    selstate="select * from tab_places where state=?";
    PreparedStatement ps=con.prepareStatement(selstate);
    ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
    ResultSet rs=ps.executeQuery();
    if(rs.next())
    jTextField1.setText(rs.getString("place_ID"));
    jTextField2.setText(rs.getString("place_name"));
    jTextField3.setText(rs.getString("category"));
    byte[] ba;
    ba=rs.getBytes("image");
    ImageIcon ic = new ImageIcon(ba);
    jLabel6.setIcon(ic);
    in=true;
    catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
    catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
    Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
    private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
    }  how do i get dat resultset,
    help me out

    One post wasn't enough?
    {color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
    db

  • Is it possible to use same data source for two info cube

    Hi,
    My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
    Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
    Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
    "0IC_C03".
    Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
    and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
    Pls. help.
    Regards,
    viren.

    Hi,
    You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
    In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
    Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
    Cheers,
    Kedar

  • Can we use same number range for different  fields

    can we use same number range for different  fields. how can we see the number range defined for a particular field

    Hai,
    Yes you can have same number range for different fields  by using the same domain to the data elements that are user to your two fields.
    To see the range:
    Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
    <b>Reward points if it helps you.</b>
    Regds,
    Rama.Pammi

  • HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

    I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

    I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
    also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
    I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

  • My ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

    my ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
    please help!  i am at a loss here.
    thank you, movie lady
    ibook g4

    The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
    If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

  • How to use Same Inspection plan for Multiple Plants?

    Hello,
    When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
    Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
    So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
    But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
    Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
    And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
    Thanks
    SAP Fans...

    Dear,
    For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
    Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
    Regards,
    Prasobh

  • Can I use same result set for two queries?

    Hi,
    Can I use the same result set for two queries?
    For example:
    ResultSet rs = null;
    rs = ps.executeQuery(query1);
    while (rs.next()) {
    rs = ps.executeQuery(query2);
    while (rs.next()) {
    Is it OK to use? or Is there any preformance issues?
    Appreciate your help.
    Thanks in advance.
    Prasad Vagolu

    Sure. You have a variable of ResultSet type. First you create a ResultSet and assign it to that variable. Then later you create another ResultSet and assign it to that same variable. Assigning an object reference to a variable takes essentially no time, and at any rate it isn't any faster to assign it to a different variable. Also, no matter whether you use one variable or two, you are still creating two ResultSets.
    However, you really should be closing your ResultSets after you finish using them. That's nothing to do with the assigning-to-a-variable question.

  • HT204380 Can I use same email address for face time on iphone as well as macbook?

    Can I use the same email for facetime on both iphone and macbook?  I tried and got email already in use. 

    Its yahoo.  When I type in my address it comes up as email verified for another apple id.  This is strange?  i have it on my iphone.  I am registered with the games centre, although I have never used it. do you think this is what the problem is.

  • Import tables using same file name for all tables

    hi,
    We are using oracle 11.2.0.3.0, we have taken export of multiple tables in schema, unfortunately in exp command we have mention same file name for all the tables, now it has created one file for all export but the size of that file shows that all the tables included in it , when we try to import the tables only last table mention in export command is imported for other tables it hangs, example of code show below.
    Is there any way to import the remaining tables.
    exp system file =exp05042013.dmp tables=gr.table1
    exp system file =exp05042013.dmp tables=gr.table2
    exp system file =exp05042013.dmp tables=gr.table3

    Hi,
    You can use as :
    exp username@database tables=table1,table2 file=tabledata.dmpDid you have any RMAN full backup?
    Why you are not recover crash database?
    Mahir

  • How to use same jco destinations for two DCS

    Hi,
        I have a scenario where two dcs are using the same function module so i have a doubt that can we make jco destinations different for two dcs or not,plz help me
    Thanks,
    Santhosh.

    Vanama
    JCO Destination names are associated with models and not DCs. You can use same or different JCO destination names across different models.
    Typically if you are using a common set of function modules(RFCs) you might decide to create one or more model (each model consisting of logically related RFCs)in one DC and use it accross different DCs(By declaring the usage of the DC in other DC and declaring model usage in a particular component). This not only will save build time during design process, but will also bring in modularity and reusability. But its purely a design decision you need to make based on your requirement.
    kk

  • Can i use same address pool for different remote access VPN tunnel groups and policy

    Hi all,
    i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
    can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
    thanks in advance
    Shnail

    Thanks Karsten..
    but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA  and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
    so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below,  this will achive waht i need right??
    access-list 15 extended permit tcp any host 192.168.205.134 eq 80
    username test password password test
    username test attributes
    vpn-group-policy TEST
    vpn-filter value 15
    group-policy TEST internal
    group-policy TEST attributes
    dns-server value 192.168.200.16
    vpn-filter value 15
    vpn-tunnel-protocol IPSec
    address-pools value existing-pool
    tunnel-group RAVPN type ipsec-ra
    tunnel-group RAVPN general-attributes
    address-pool existing-pool
    default-group-policy TEST
    tunnel-group Payroll ipsec-attributes
    pre-shared-key xxx

Maybe you are looking for