Using same data in 2 different grids

Hi
Im wondering if it is possible to do this in FRStudio.
I have 2 grids in one report. Both grids come from a different datasource
ie:2 different cubes.
I want to use the same prompt selection (use the same data) for both grids but without having 2 seperate prompts selections.
I can merge prompts on 2 grids coming from the same datasource but it seems I cant when they are from 2 different datasources. Is there anyway around this?
Thanks in advance.....

well if it is possible as per your requirements, you can use 2 different source in the same grid
Thanks and Regards,
Rahul

Similar Messages

I was using iphone4 and iphone5 as well,i want to use two different apple id but dont want to loose the apps and data's .I still want to use same datas but with different id is it possible ..?

I want to create new apple id, but dont want to loose existing data's downloaded using existing id.I still want to use two apple id

No. All apps purchased are forever linked to the original ID and there is no way to transfer them.

How to Use Same Asset Number with Different Sub-number

Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin

Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

Using same program-id in different RFC adapters

Hi,
I have the following question:
Is it possible to use the same program-id in different RFC adapters for the same SAP backend?
In gerneral, what are the naming-conventions or best practices for using program-ids for RFC adapters?
Thanks for your answer!
best regards,
Hannes

No,
You should not use same program ID for different RFC adapters. It is recommended by SAP (check FAQ's on RFC).
Although technically you can use but it gives you unpredictable behaviour based on connection pool.
Regards,
Satish

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

Can we use same data definition with multiple concurrent programs?

Hi,
My requirement is as below:
I have two concurrent programs (say CP1 and CP2), both concurrent programs need to use same data definition (the same data template xml file) and same RTF layout template. However when registering data definition in the E-Biz, the data definition code must match concurrent program, hence I have to create two definitions (for the same data template xml file) and because layout template is attached with data definition I have to duplicate the layout definition also.
In summary, i have to create two (duplicate) Data Definition and Layout Template for the same dataTemplate.xml and Layout.rtf files. Is there any way to avoid this duplication?
The only issue with duplication is any change in xml or rtf needs to be updated in all the four definitions (2 data definitions and 2 layout definitions).
Thanks
Bhavik

I found the resolution and thought of sharing
you can see this post
*[How to use same data definition/template between multiple concurrent programs? |http://techatwork.wordpress.com/2009/08/06/how-to-use-same-data-definitiontemplate-between-multiple-concurrent-programs/]*
Thanks
Bhavik

How to use same DFF for two different forms with :BLOCK.field reference

Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

Can we use same SOAP ACTION in different environments?

Hi All,
I have a doubt.
Can we use same SOAP Action URL in different environments i.e suppose say Quality, Production and Pre production.And the Target URL is different in both environments.
If yest what is the impact in different environment.

Hi ,
SOAP action is nothing but operation/method in webservice .
Usually at end system end as a good practice/std they will maintain the same soap action name in all their environments,but it's always better to cross check url and soap action with end system folks before configuring in PI .
We have faced an issue in production some time back ,at target system end they upgraded their server and used new wsdl which is almost similar to existing but one of the operation they duplicated by adding few addition fields but forgot to inform PI system.Though we are using new wsdl but pointed to old soap action .Interface got failed in PROD after investigation we come to know that we are using wrong soap action
Regards
Venkat

Using same string indicator in different stacked sequences

Hi guys, I want to use the same string indicator in different stacked sequences. I tried to wire the output of every string constant through the sequence to my string indicator outside the sequence block but then I get an 'Wire connected to an undirected tunnel' error. What is the best way to use the same indicator for all the sequences?
Solved!
Go to Solution.

GerdW wrote:
GerdW wrote:
@TiTou:
Problems with copy&paste?
not even :-o
GerdW wrote:
@TiTou:
Problems with copy&paste?
not even :-o
see : http://forums.ni.com/t5/Feedback-on-NI-Discussion-Forums/Text-lines-and-images-get-duplicated-when-I...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Is it possible to use same sap script for different comp code with difflogo

I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?

Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale

Using Same sql file in different database

Hi ,
I need to use same sql file which contains table ddl for sybase as well as oracle .
here If the db is sybase should run sybase ddl only and visa-ver.
Please help
Regards

Its already there, but you have any though on same file please write.My thoughts is that it sounds like a bad idea. Do you have a particular reason for wanting this in a single file?

Update Library of a person using same music files but different login

I use iTunes with Windows. The songs are saved in "my files". I am using Windows XP Verion 5.1 My wife uses also iTunes on the same computer but with a different login. When I add files to iTunes my library is up to date but not hers. What can I do?
Windows XP Verion 5,1

Have a look at this article on sharing iTunes and see if it does what you are looking for. It was written for iTunes 4 but the version doesn't matter:"iTunes: How to share music between different accounts on a single computer" http://docs.info.apple.com/article.html?artnum=93195

Using same data in 2 different grids

Similar Messages

Maybe you are looking for