Using same dimension again and again

Hi All,
I have one problem in which one fact has many wid's and these all fact wid's connect with the single dimension.
As per me I can create alias of the dimension and join them with fact to achieve it.
scenario
Fact1
x1-wid joins with xx1 wid of dimension1
x2 wid joins with xx2 wid of dimension1
x3 wid joins with xx3 wid of dimension1
as per me we can we can create the alias of dimension 1 and join with them.
But it will take time, is there any other way to achive it kindly suggest.
Thanks

Hi User,
Having alias is the only option.That is the best practice.
Regards,
Dpka

Similar Messages

Can we use same session again and again

can we use same session again and again.....in BDC
thanks,
venki..

Hi
Till all the records in that session was properly uploaded into the system you can use the same Session again and again.
<b>Reward points for useful Answers</b>
Regards
Anji

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts ?

I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?

Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account.

I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?

I updated my mac 10.8 to mavericks but after installation the app store ask for the same software update again..i have a slow connection..i cannot install it again and again..what should i do?

In case you are not aware, Mavericks requires a high speed broadband connection.
In the event you need to restore or repair the starutp disk, OS X Recovery also requires a broadband connection as noted here > About OS X Recovery
You can check your download speed here > Speedtest.net
15Mbps or less, you may not be able to install Mavericks or use OS X Recovery.

New Macbook Air i5 wireless is very slow and disconnect again and again. Any one has the same issue or some help??

I recently bought a new 13 inch Macbook air and wireless internet is really slow and disconnect again and again. However I hav another windows laptop at the same place and that never disconects or looses signals? wireless on this mac is too slow that I cannot even use to make a skype call. I am new mac user and getting a bit disappointed because of this bad performance.I googled about this issue and found that lot of people are having the same issue with macbook air. I switched off the bluetooth adaptor but still no progress. Any help will be appreciated. Thanks

I am experiencing something similar with my MBA 13"/i5/256GB.
To take it one step further, I started up a Terminal session and ran a ping against my wireless router. I see the same pattern repeated over and over: I get about 5 or 6 pings through, then 4 or 5 misses, then it reconnects again. When it reconnects, the first ping or two have times in thousands of milliseconds, where normal is maybe sub-millisecond to 4ms for the remaining few seconds.
I have other wireless devices, including iPhone, iPad, and an older MacBook - all work fine. The MBA is the only Lion device.

I open up yahoo and my messenger (no the full version) the one you can use in your mail. Now that I have opened I can't close it even though I hit sign out again and again. Please advise.

I am new to using a mac I have an older version. But I have used firefox on my pc before. I downloaded it and went to open messenger. Not the full downloaded messenger but the one you can access when in your mail on yahoo. It opened fine but now it won't close, even though I hit sign out again and again. I have tried force quite, uninstalling and reinstalling and still every time I sign into yahoo on firefox there is my messenger list open. For privacy issues I really need to be able to open and close it.

Known issue, our QA team working on it, See
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
you can follow the bug by opening bugzilla account and add yourself to CC list :)

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?

Itunes asking me my billing verification again and again on the same computer. I don't know why it behave like this. Anyone can solve my problem?
I already provided my 3 digit CVV number but Itunes again need to confirm the code whereas on my Office Computer I am purchasing Apps on Itunes without verifying my billing information again and again except once at the time of creation of account.
Please help me as I am charging by my Credit Card bank by US$ 1 each time when I give verification code.
Thanks
Talat Khatri

Try the following steps,
Sign into your computer and removal of credit card information. Here are the steps:
1) Open iTunes and sign in to the iTunes Store.
2) Select "View My Account" from the Store menu.
3) Enter your password and click the View Account button.
4) Click the Edit Payment Information button.
5) Select "None" as the payment type.
6) Click the Done button at the bottom of the page.
Reset your account password from the following link:
http://iforgot.apple.com
Phase 3:
Download a free content on to get recognized in iTunes.
To ensure your account is functioning, try downloading a free item from the iTunes Store. To do this, navigate to the iTunes Store main page by clicking the Home icon near the upper-left corner of the window. Scroll down and click the "FREE ON iTunes" link near the bottom of the main page, then select an item to download.
After you are able to download the free App try updating the billing information as usual.

Please give this awsome app more by providing features:: 1. thumbnails for pages ,2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same annotaion

please give this awsome app more by providing features::
1. thumbnails for pages ,
2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same annotaion when selecting multiple words in a single page).
thanks .. hope this will be soon adapted with

please give this awsome app more by providing features::
1. thumbnails for pages ,
2. ability to annotaions( highlighter and underliner) to remain enabled once selected ( because many times it becomes hectic to select again and again the same annotaion when selecting multiple words in a single page).
thanks .. hope this will be soon adapted with

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way.

Same JSP/Servlet is executing again and again

Hello,
We have some JSPs which do a lot of processing and is 'alive' for a long period
of time. If we use the JSP with small amouts of data, it is fine. But when we
use the JSP with lot of data, it seems to 'go in a loop'.
It is processing the data again and again and again and brings down our server.
We do not think it is the code that is wrong - as it processes perfectly if the
data is small or when our server is not busy. This problem happens if the data
is lot and the server is also busy. The JSP seems to be executing again and again.
Is there some type of 'refresh' logic in weblogic that refreshes the JSP/servlet
and makes it 'execute' again and again.
We are using WL 6.1
Thanks,
Oleg.

Hi Oleg,
Could you tell us how you find out that there is an additional request?
Regards,
Slava Imeshev
"Oleg" <[email protected]> wrote in message
news:[email protected]...
>
Thank you Varad and Slava,
We don't use plagin for iplanet,
but our problem is very similar:
Weblogic generate additional request if the previous request toservlet/jsp is
taking long time.
Where I can configure JSP timeout to fix this problem?
Thank you very much.
Oleg.
"Varadharajan" <[email protected]> wrote:
Hi Oleg,
Are you using weblogic plugin for iplanet webserver ?
In weblogic server 6.1 sp3 there is a problem with this plugin. It would
generate
additional request if the previous request to servlet/jsp is taking more
than
the configurable timeout set in the obj.conf file of iplanet webserver.
This plugin problem is fixed in wls6.1 sp4.
Rgds,
Varad
"Slava Imeshev" <[email protected]> wrote:
Hi Oleg,
See my answers inline.
"Oleg" <[email protected]> wrote in message
news:[email protected]...
Hello,
We have some JSPs which do a lot of processing and is 'alive' for
a
long
period
of time. If we use the JSP with small amouts of data, it is fine.But
when we
use the JSP with lot of data, it seems to 'go in a loop'.I guess you need to figure out if "seems" really "does".
It is processing the data again and again and again and brings downour
server.
How do you know that a JSP goes into a loop?
We do not think it is the code that is wrong - as it processes
perfectly
if the
data is small or when our server is not busy. This problem happensif the
data
is lot and the server is also busy. The JSP seems to be executingagain
and again.
What load is considered to be high/low for you
application? Are you running a load test?
Is there some type of 'refresh' logic in weblogic that refreshes
the
JSP/servlet
and makes it 'execute' again and again.Normally Servlet/JSP enters service() method when
there is an incoming request. It should not be happening
at JSP's will.
Regards,
Slava Imeshev

When I wants to syncronize my foto's from my computer to my Ipad, Ik get the message "itunes photprocessor was not installed correctly, please reinstall itunes, error 7" When i did so, the same message appears again and again??????

When I want to syncronize my photo's from my computer to my Ipad, I get the message "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
When I did so, the same message appears again and again.
Anyone knows the solution?
Thanks on forhand.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

I want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

i want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

Try temporarily turning off all your firewall and antivirus software until the download has completed.

I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do?

Question
I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do? edit

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

HT6114 hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

I can`t use apple store. my apple id needs my paswoord, to set the security questions, after I introduce the paswoord it askes for the paswoord again and again! it doesn`t work, and the paswoord is the right one. What can i do?

i can`t use apple store. my apple id needs my paswoord, to set the security questions, after I introduce the paswoord it askes for the paswoord again and again! it doesn`t work, and the paswoord is the right one. What can i do?

I have figured out already. Firstly please try:
1) Installing iBooks on your iPhone via iTunes on PC/MAC
2) Adjust the time of your iPhone to 6 months ahead (e.g. 2013 May)
3) Close all apps currently running, clear Safari cache and history, sign out of Apple ID (Settings>iTunes & App Stores), reboot your device
4) Open iBooks on your iPhone, download any 1 book
5) System should prompt you to enter 3 security questions
6) Enter your answer and click "Done" at bottom right part of your input keyboard (Do not press upper right button)
7) Done!
I cannot imagine the system has gone so stupid. Apple, please retify the problem ASAP.

Same Servlet/JSP is executing again and again

          Hello,
          We have some JSPs which do a lot of processing and is 'alive' for a long period
          of time. If we use the JSP with small amouts of data, it is fine. But when we
          use the JSP with lot of data, it seems to 'go in a loop'.
          It is processing the data again and again and again and brings down our server.
          We do not think it is the code that is wrong - as it processes perfectly if the
          data is small or when our server is not busy. This problem happens if the data
          is lot and the server is also busy. The JSP seems to be executing again and again.
          Is there some type of 'refresh' logic in weblogic that refreshes the JSP/servlet
          and makes it 'execute' again and again.
          We are using WL 6.1
          Thanks,
          Oleg.


there is no refresh logic in wls unless u specify it.
          please check the code for any "refresh"ing the page
          SP
          "Oleg" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Hello,
          > We have some JSPs which do a lot of processing and is 'alive' for a long
          period
          > of time. If we use the JSP with small amouts of data, it is fine. But
          when we
          > use the JSP with lot of data, it seems to 'go in a loop'.
          > It is processing the data again and again and again and brings down our
          server.
          > We do not think it is the code that is wrong - as it processes perfectly
          if the
          > data is small or when our server is not busy. This problem happens if the
          data
          > is lot and the server is also busy. The JSP seems to be executing again
          and again.
          >
          > Is there some type of 'refresh' logic in weblogic that refreshes the
          JSP/servlet
          > and makes it 'execute' again and again.
          > We are using WL 6.1
          >
          > Thanks,
          > Oleg.

Using same dimension again and again

Similar Messages

Maybe you are looking for