Using same excitation on several channels

Is it
possible to use the excitation voltage from one channel, as an external voltage
on three other channels?
So that all
stain gauges is using the same Vex
Using following
equipment: SCXI 1520, with SCXI 1314 terminal block.
Lars

it´s because we have 4 strain gauge mounted on a "ring"
To minimize the amout of wires from the "ring", i am using the same excitation for all SG

Similar Messages

How can I record several channels of data at different rates with the same card?

I am building an application in which I need to record several channels of DC voltage data to disk at different rates, for example, Channel 1 at 40 Hz, Channels 3-5 at 10 Hz, Channels 6-8 at 1 Hz, etc.
All these channels are time-referenced, so I need to make sure data for channels recorded at slower rates line up with their correct time stamp.
Currently, I am building all data into a 2D array one row per loop iteration.

Hello;
At this time, the NI DAQ boards have only one scan clock, so, you can only define one valid scan rate for all of your channels.
The better approach for you is to sample all channels at the highest rate you will need, and then discard the samples you don't need to save.
Hope this helps.
Filipe

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

I am having the same problems as several posters here.

I am having the same problems as several posters here. My note 3 was pre-ordered and worked fine until may 16th of this year. This was the date of an ota upgrade to kitkat. After apps were "optimized" I first noticed such a power drain that my phone lasted 4 hours on standby without use. I uninstalled several apps including facebook which and rolled back google play services for several days. This helped my battery life which extended from 4 to 12 hours at low use. Previously, I could use the phone for nearly 48 hours without charging and using a number of apps which involved graphics, sound and data. Which leads to my next point, any graphically charged app (games generally) causes my phone to heat up tremendously and the phone leaks power like a sieve; again I reiterate this began may 16 with an ota update to kitkat which was rolled out by verizon MUCH later than other carriers but clearly didn't involve fixes. Finally, and the most nagging problem of all....my mobile connectivity has been shot. I have dropped calls, I have had to drive to get signal, I have missed calls and I cannot afford this!! I am a home health nurse and must be in contact with MD offices and patients. Even mobile connectivity in my home is affected as I have two bars at max. I have noticed the wireless indicator go from 0 to 5 bars in a rapid cycle 5 to 6 times in a few second period and result in "no mobile network found" if I try to call anyone. This service is unacceptable and I don't want to have to root my phone as I am not sure that this would fix the problem. This is a 700 dollar phone and I shouldn't have these problems. If a solution cannot be reached, I am under contract for another year and several months and I demand a new phone. I will be saving all communications (or lack thereof) via screen shot for documentation.

markaandersonco2006,
Have you tried wiping your cache partition? I noticed extremely poor battery life after the KK update, like you, (maybe 5 hours of use before requiring charging) and I saw a message on one of the Android Central forum (actually for the AT&T version of the Note 3) that mentioned to try wiping the cache partition. That appears to have worked. Since then, my battery life has been phenomenal. I don't know why this worked, or the downside of doing it. But it worked.   As I write this, my battery is at 66%, and has been on for 14.5 hours (with one brief charge of 15 or so minutes in my car last night).
Wiping the Cache partition from Recovery Mode
This won't erase any important data. Perform the following procedure:
1) Turn off the device.
2) Press and hold the following three buttons at the same time:
     a) Volume Up key
     b) Home key
     c) Power key
3) When 'GALAXY Note 3' appears on the screen, let go of the Power key but continue to press and hold the Volume Up key and the Home key.
4) When the Android System Recovery screen appears, release the Volume Up and Home keys.
5) Press the Volume Down key to highlight 'wipe cache partition.'
6) Press the Power key to select and wipe the cache.
7) With 'reboot system now' highlighted, press the Power key to restart the device.
Good Luck!

How to use same page fragment more than once in a page,

Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satya

java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
 type: RichDocument[UIXFacesBeanImpl, id=d1]
 +id: j_id_id5
 type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
 +id: j_id0
 type: javax.faces.component.html.HtmlOutputText@bc252
 +id: m1
 type: RichMessages[UINodeFacesBean, id=m1]
 +id: f1
 type: RichForm[UIXFacesBeanImpl, id=f1]
 +id: pt1
 type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
 +id: ps1
 type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
 +id: pt3
 at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
 at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
 at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
 at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
 at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
 at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
 at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
 at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
 at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
 at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
 at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
 at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
 at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
 at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
 at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
 at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
 at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
 at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
 at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
 at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
 at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
 at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
 at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
 at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
 at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
 at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
 at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
 at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
 at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
 at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
 at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
 at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
 at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
 at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
 at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
 at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
 at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
 at java.security.AccessController.doPrivileged(Native Method)
 at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
 at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
 at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
 at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
 at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
 at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
 at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
 at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
 at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
 at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
 at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
 at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
 at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
 at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
 at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
 at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
 at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
 at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
 at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
 at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
 at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
 at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
 at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
 at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
 at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
 at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
 at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
 at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
 at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
 ... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean

Is it possible to load same vi in several subpanel ??

Hi,
Is-it possible to load same vi in several sub-panel on a vi ????
Eddy DUCHENE
12 F Chemin de Boutary
69300 CALUIRE ET CUIRE
[email protected]

Well - as far as I know, that is not possible.
If you try it with just two subpanels and the same vi to place in the subpanel, you once get error 1145 (LabVIEW: Cannot open VI because it is already in a subpanel control.).
One way you could code a similar functionality was the usage of a tab-control. You could place your "views" on 5 tabs, make the tab-registers invisible and access the single tabs using a drop-down.
Using LV8.0
Don't be afraid to rate a good answer...

Multipe Sender RFC using same Program ID

Hi all,
I have RFC>XI>HTTP scenario. All confiruation has been done in R/3 and XI has ben done correctly.
Is it possible to use the same TCP/IP port Program ID created in SM59 (in R/3) for sending different RFC messages to XI. Meaning, in different XI RFC sender adapter communication channels, can I use the same Program ID.
When I tried, it work for one RFC, but when multiple RFC sender adapter uses same program ID..RFC program errors out in R/3 itself with error message - Commit fault: com.sap.aii.af.rfc.afcommunication.RfcChannelMismatchExcept.
Please help.
Thanks
Karthik

Karthik,
It is possible to send different messages from R3 to XI that use the one RFC destination and Program ID (in R/3) and the one Communication channel (in XI)
Assume that interfaces AAA and BBB have different structures
SAP R/3
For interface AAA
(1) Execute ABAP Z_AAA which
(2) Populates the internal table ITAB_AAA with structure ZST_AAA
(3) Calls the remote enabled function ZFN_AAA
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_AAA' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 AAA = ITAB_AAA.
For interface BBB
(1) Eexecute ABAP Z_BBB which
(2) Populates the internal table ITAB_BBB with structure ZST_BBB
(3) Calls the remote enabled function ZFN_BBB
(4) Passes the interface data in the tables statement
CALL FUNCTION 'ZFN_BBB' DESTINATION RFCCOMMON
 EXPORTING
 =
 IMPORTING
 =
 TABLES
 BBB = ITAB_BBB.
Each function is called with the same destination RFCCOMMON
In SM59 point the RFC destination RFCCOMMON to your XI environment and provide a program id, for example ID_COMMON
XI
(1) Configure the sender RFC Communication Channel for example CC_COMMON and enter your SAP R/3 server parameters to include the program id ID_COMMON
(2) Configure the Receiver Determinations as follows
For interface AAA
Sender Service Enter your SAP R3 Business System for example R3PROD Interface ZFN_AAA (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process AAA
For interface BBB
Sender Service Enter your SAP R3 Business System for example R3PROD
Interface ZFN_BBB (this is the SAP R/3 remote function)
Namespace urn:sap-com:document:sap:rfc:functions
Configured Receivers
Service Integration Process BBB
(3) Configure the Sender Agreement as follows
For interface AAA
Sender Service R3PROD
Interface ZFN_AAA
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
For interface BBB
Sender Service R3PROD
Interface ZFN_BBB
Namespace urn:sap-com:document:sap:rfc:functions
Sender CC CC_COMMON
Regards,
Mike

Using common SOAP Sender Communication Channel.

Hi,
Env: PI 7.1
Scenario: Same SOAP Sender communication channel is used in more than one scenario.
Properties "Use Encoded Headers" and "Use Query Strings" are checked.
Problem: SOAP channel is getting binded with the first interface/call. Subsequent calls from other interface proxies fails. It always shows the interface which used this channel for the first time.
My aim is to use the common channel in multiple scenarios and do not want to create separate channel for each.
This was working fine in PI 7.0.
Please help.

A workaround would be creating multiple sender agreements using the same channel. For this while creating the sender agreement, use the option "Sender uses virtual receiver". This was u may use same set of sender service and sender interface with same channel.
Regards,
Prateek

Using same BS name in all XI env.

Hello All,
I need advice to manage XI software logistics. I have 3 XI environments. I used to do export and import IR objects and configure my scenarios manually.
Now I am thinking to take export of my configuration objects to save my time. I have to use same Business System names in all XI environments to achieve this. I am giving some generic name for BS and taking export of BS and importing on other environments. I do changes techical system accordingly.
My 3 XI envronments connects to different SAP systems.
Do you see anything wrong here. is there any restriction like i have to use BS name as logical system name which is unique in landscape. SAP naming convention says to use BS as logical system. Is it mandatory.
Please suggest.
Thanks,
Srinivas

Hi,
I don't understant why you need to have the same BS in your three XI environment.
Imagine that your 3 XI environments are: DEV, QUA, PRD,
you can define in your SLD : BS_legacy_DEV, BS_Legacy_QUA, BS_Legacy_PRD in order to distinguish them in your Landscape.
Always in SLD you create a Group (like a group of transport). By this way, during the transport your config (ID) will be automatically created with the good BS. You have just to finish to fill the Communication Channel, coz after transport XI delete parameter "IP adrress and folder".
BS_Legacy_DEV --> BS_Legacy_QUA (done automatically with transport DEV -> QUA)
BS_Legacy_QUA --> BS_Legacy_PRD (done automatically with transport QUA -> PRD)
Regards.
Mickael
Exactly, in SLD, open your Business System, look at the tab "Transport" and you can associate your "Group" between Source (e.g DEV) and target (e.g QUA).
Edited by: Mickael Huchet on Jul 1, 2008 4:21 PM

Pixilation on several channels in one location in home

I'm experiencing intermittent pixilation on several channels at only one location in my home. I have switch the STB with another in my home and the problem still persist in just this one location regardless of the box. I am not experiencing pixilation in any of the other locations in my home. The problem seems to come and go and increase in intensity on occasion. I have rebooted my router and my set top box.

Hi, you need to find both ends its the coax cable its not enough to have disconnected and reconnected at the stb. you should find if the other end of that cable is in the same room or fished through a wall to another room and trace where it goes, probably and hopefully into a splitter. When you find where it goes simply disconnect it and reconnect it very straight, nice and firm. Hand tightness should be fine (yes, this has happened to me and others before, and this should help). If that doesn't help clean up the signal then you may need to replace that cable altogether. Evaluate the job. If its easily replaceable then drop by the store and pick up some rg6 cable (tri or quad shield)
If it's not easily accessible, or replaceable then hit the contact us link at the bottom of the page and see if live chat can help you get a tech. Be sure to tell them that you moved the box to another location and the problem went away, so you know its the cabling for the room that needs attention.

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Photoshop CS4- Does anyone know how to tell if two people are using same file?

Hi,
Thanks for your response. I'm not the solution in the link.
The problem that I am having at work it that several people in our department want to be able to update a file, but we want to be sure that no one else is currently editing that file. If someone has the file open, it's helpful to know the user's name so we can talk about when the next person can edit the file. This works in Excel files that we use, and I would love to find out how to do it in Photoshop and Illustrator.
Thanks for the help!

TS4036 I haven't used my ipad for several weeks and now it is locked and displaying 'This ipad hasn't been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi'. I cannot do anything at all.

I haven't used my ipad for several weeks and now I can't do anything on it, it seems to be locked and I cannot unlock it. The screen just seems to be frozen with the following message 'This ipad hasn't been backed up in 2 weeks. Backups happen when this ipad is plugged in, locked, and connected to WiFi'. Help please!

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to do averaging N samples for several channels?

Dear members,
I got the Routine for averaging N Samples from One channel's data from the forum. I would like to
do for several channels. How to go about it?
Regards,
G.Kousalya

You can do it in a way that is very similar to the approach you would use for a single value (see attachment).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
example.vi ‏38 KB

TS1702 Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store its showing paid application in apps store with using same apple ID account. Please re

Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store its showing paid application in apps store with using same apple ID account.

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

Inability to verify new/reset BB ID on Q10 using same email address

Hi
Please help: SOS!
BB Q10 user religously backing up device data on my MacBook Pro at least monthly, most recently on 1st December.
Was prompted later same day to verify my BB ID. Input wrong Password then in process of resetting it ended up also resetting my BB ID that was first created on 8th August 2012 using same email address, as the 'Your BlackBerry ID has been created' subject email is in my same email Inbox from both dates (8th August 2012 and 1st December 2014).
Since then I am unable to -
> Verify my same email BlackBerry ID on my Q10 persistently receiving error message: 'You can't sign in with a different BlackBerry ID on this device. Sign in with the original BlackBerry ID used on this device:'
> Make any more recent backup of my Q10 data due to BlackBerry ID mismatch between the device (unable to verify) and BB Link (signed on with my email BB ID) running on MacBook Pro
> Restore the 1st December 2014 backup on my Q10
Therefore, in a bind as I have a ton of critical contacts plus nearly 1500 precious photos on my Q10 that I canNOT afford to lose; thus reaching out to the support community for praying to God a breakthrough solution.
Since the same email address pulls any potentially, albeit unlikely, discrepant BB IDs together that may be duplicated on record there should be hopefully a way out for me to regain data backup / restore control over my Q10 device.
I have been a happy BB user for well over a decade but my struggle all day today to get out of the ID bind leaves me deeply disppointed in ebsence of a straightforward yet secure solution to such presumably common issue faced by many.
Thank you in advance for your expert attention and professional support.
Kind regards
NaderH

outside_the_box wrote:
Does it show in settings/BlackBerry ID that your email address has been confirmed?
Well, I've asked that twice already... third time won't hurt!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using same excitation on several channels

Similar Messages

Maybe you are looking for