Using same files with PS and Iphoto?

Again, I'm sure this one has been discussed b/4, however can't seem to find it.
When using PS on the Mac, can you use the same files with Iphoto? IE, are the files in the Mac OS file structure available to both applications? And if so, are there problems using both applications?
I like the ability of Iphoto to retrieve my IPhone photos, but prefer using PS for organization and managing.
Thanks.

iPhoto has a preference to use PS as an external editor.
All photos will be saved in the "modified" folder in iPhoto.
Hope this helps!

Similar Messages

Why can't I open ccitt g4 compression tiff files with ps6? and could open theses same files with ps3?

Why can't I open CCITT G4 compression , TIFF format files with PS6? I used to open these same files with PS3. Can anyone help me out with this????

This is what I get when trying to open ccitt G4 compression files. Tiff format. Thanks for trying to answer my question and Problem. I found a site where supposedly I can download a plug in into photoshop 6 that will open the files. don't know if it will work but am gonna try it.

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
Thank you for your attention.
Annalisa

Don't understand what you writing here. Screen shoots would be most helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

No printing :I can't print anymore, printing the same file with another programs is ok, printing form LR: Preparing and Printing indicatorbar in the left hand upper corner are running, but no output at all rom my printer. I have been printing before. I u

No printing :I can't print anymore, printing the same file with another program is ok, printing form LR (in the same system and printer of course :-) ): Preparing and Printing indicatorbar in the left hand upper corner are running and completing, but no output at all to my printer. I have been printing before. Next I upgraded to LR5.7.1 but the problem stays. Perhaps some adjustment is changed by me unintentionally, but I have no idea. Does anybody know what to check? Printing to file is also strange,the canvas only seems to accept A4, and crops any image relative to that size, so a 10x15 cm print on 10 x 15 cm paper is cropped to 10x15/2. Anybody any idea? (system win 8.1 64, printer HP B8550)

I accidentally solved my mystery. For some reason it was set to "print to file". I changed it to "printer" and now I am able to print.

Firefox 10. On Windows 7. Adobe PDF will not download or show up in the download list. I tried same files with IE. Download worked fine. Have uninstalled and reinstalled multiple times

Firefox 10. On Windows 7. Adobe PDF will not download or show up in the download list. I tried same files with IE. Download worked fine. Have uninstalled and reinstalled multiple times

Perform the suggestions mentioned in the following articles:
* [[Unable to download or save files]]
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
Check and tell if its working.
Not related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

HT4623 I've updated my iphone4 with iOS 6, but now i am unable to transfer my music videos to iphone.I cant add a music video to itunes using 'add file to library' and then transfer it to my iphone.

I have updated my iphone 4 with iOS 6, but now i am unable to transfer my music videos to iphone.I cant add a music video to itunes using 'add file to library' and then transfer it to my iphone. Am using itunes 10.7.

You need to update iTunes to 11.1 on your PC

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

HT1386 we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

Each phone needs to set its own sync settings on the various tabs in iTunes. On the Apps tab, for example, uncheck the apps that you don't want on the phone being synced. This article may also be of interest: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/.
You can change the Apple ID used for purchasing on her phone by going to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using her Apple ID. However, be aware that if she has any apps on her phone purchased with your Apple ID she will still be prompted to enter the password associated with this ID for all future updates of these apps. This is because apps are permanently tied to the Apple ID used to purchase them, regardless of the ID in Settings>Store.

The same file with the same name need to call two RFC's with the sequence

i have to pick up the same file with the same name and call the two RFC in sequence
scenario.i have xxx.txt file.file should be proces first calling the first rfc .
I created two different communication channels
for the first sender file communication channel i should not use processing mode archive,delete,Test
and only option is set read only.
if i set the read only the file ..then i can not use the same file again to call second RFC.
how we can acheive the above scenario?
Regards,
Hyma

If you want to file need to be picked up twice in same folder, it seems it is hard for PI adapter to achieve it, you should look for API's that control adapters availibility.
But if you have different folder, then it make your scenario simpler since you can process first time, then output to another folder, configure another adapter to pick up from different folder.
Regards
Liang

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

Adobe Creative Cloud - How To Share Files With Clients and Colleagues | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast, Terry White shows how to share Photoshop, Illustrator and InDesign Files with clients and colleagues and all they'll need is a browser to comment and see your Photoshop Layers.
http://adobe.ly/10ZjpE4

Terry,
I guess I miss something. How can I share a folder of photos? When I return from a shoot, I select 20 of the pictures and need to share them with my client to pick up the favorites. Am I supposed to copy and past an URL for each image separately?
Sometimes I also work with a colleague, I need to share my favorites with him. Same issue.
We have tried Adobe Cloud, and then went for Dropbox. There we can share a folder and he can put even his pictures in it as well. That's what I call collaboration. And it is free (unlike Adobe Cloud). If you have some word in Adobe, please tell them to either drop it and make a deal with services like Dropbox, or make it properly.
Thanks.
Vaclav

How to use parameter file with java

Is it possible to use a parameter file with Java, and is there any class/method to make it easy to call and use these parameter from a text file, other than scanning the whole text file manually as we can do normally with visual basic/c++, so we can call the program with the parameter file, like java testing c:\\testing.ini

If I understand you correctly, you may be looking for a properties file. This is basically a text file that contains pairs of strings in the form:
parameter1=value1
parameter2=value2
parameter3=value3
...etc.
and the values are retrieved using the java.util.Properties class - see:
http://java.sun.com/j2se/1.3/docs/api/java/util/Properties.html
Sample use://Call chis method once, to load the props file.
//props file is called "demo.properties", and is
//in a directory that is included in the classpath
    private void loadMyProperties() throws Exception
     InputStream stream = getResourceAsStream("/demo.properties");
     if(stream == null)
         throw new Exception("stream is null!");
     demoProperties = new Properties();
     demoProperties.load(stream);
     stream.close();
// Then you can retrieve properties in your code using:
String param3 = demoProperties.getProperty("parameter3");
//...etc

Using ditaval files with XML Author

I've been evaluating XML Author and am trying to determine how to use ditaval files with it. If I want to save a ditamap as a book for PDF creation, the Prompt for DitaVal File check box is greyed out. Does anyone know why this might be the case? Is the use of ditavals limited to a full implementation of FrameMaker?
I tried adding PromptForDitaval=1 to the [General] section of the ditafm.ini file to no avail.

Make sure you are using the latest hotfix for Director (11.5.8) - it is the first to support AS# in Flash. Your SWF members will probably need to be linked to their external files instead of fully imported.
Or perhaps you're saying that you've met both these conditions and are still seeing problems?

Using *.so files with eclipse

Hey there
I'm having a little problem compiling an application which uses *.so files with eclipse:
If I run eclipse from the directory in which the *.so files are present, the application will run.
However, if I run eclipse from any other directory , the applicationwon't run, stating that the *.so were not found.
I've placed the path to the directory on my $PATH , and tried to add the following line to the VM variables in the RUN menu:
-Djava.class.path=<directory _name>
but to no avail..
Any ideas?
Thank You!
Message was edited by:
Yossale

I added it to the LD path, but nothing changed.
How can I check if eclispe picked up the change?First check that you can now run your program from any directory and then worry about Eclipse.
Where did you setup the LD_LIBRARY_PATH?

Using same files with PS and Iphoto?

Similar Messages

Maybe you are looking for