Using same ip adress for VPN and inside interface

Hi, I want to know if it's possible on a ASA to use the same IP on the LAN and on the VPN. My user has actually a fixed ip on the LAN and I would like to reuse the same IP when they are connect to the VPN.
The target is to allowed/restric the same thing when they are on the VPN or on the LAN.
Thank !

Hi Francis
You can provide ips from the same ip block which is being used in the local lan , but its always advisable to provide ips from different block altogether.
regds

Similar Messages

  • Can we use same Business Service for Sender and Receiver

    Can we use same Business Service for Sender and Receiver

    Hi
    In addition to the above infomation explaining about the Business Service..
    Business Service: Address an abstract business entity as the sender or receiver of messages.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    The business services are used when configuring cross-company processes also..
    regards
    Kishore

  • Should we use same apple id for ipad and iphone

    i had bought a ipad, should i use the same Apple ID as per my iphone? or create a new one. if i use the same ID, howabout my i cloud storage will be remain 5GB or 10GB

    One possible use for separate Apple IDs is to have a separate ID associated with a particular device.  This could be important with iMessage or Facetime, because if you associate all your devices with one ID, you will receive iMessages or Facetime calls on all your devices simultaneously.  If you only want to do iMessage on your iPhone, for example, people could use the Apple ID associated with your iPhone, and the messages would not show up on your iPad.  Obviously, this could be a good thing or a bad thing, depending on how you like to work.
    For me, I have a single Apple ID, mainly because it is easier to keep track of my purchases and downloads.  I also prefer to receive messages and facetime calls on all my devices, so I can choose which one to respond from.

  • Can I use same USB drive for Intel and PPC backup?

    Hi, I have a USB hdd that was used for TV recording but failed on that so I reformatted it as Mac OS extended journaled with 6 partitions (GUID), and using SuperDuper, cloned Lion from a Macbook Air and Tiger from my eMac into different partitions, with the idea of using it as an extra backup.
    Tested the USB drive on Disk Utility verify disk function and it said all 6 partitions appear OK. Can boot the MBA from the USB drive (although slow) but the eMac does not show the disk image on the USB drive as an optional restart item.  I have eMac backed up on a separate Firewire drive but would like to use the USB drive as a second line of defense.
    My question is, would I be able to restore from the Tiger dmg on the USB drive, given that it is GUID and not Apple partition scheme. Would I have to reformat it to Apple partition scheme. Also, how would you go about a restore  from the USB drive if the eMac's OS was kaput?

    You can't store a clone of an Intel-based Mac and a clone of a PowerPC-based Mac on the same drive.
    That's because an Intel-based Mac can start from a GUID partition table, but a PowerPC-based Mac can only start if your USB drive is using Apple Partition Map instead of GUID. In your case, you have to buy another external drive to make a clone of the PowerPC-based Mac or the Intel-based Mac.
    To change the partition map of your USB drive:
    1. Open Disk Utility (it's in Applications > Utilities folder), and select your USB drive in the sidebar.
    2. Go to Partition tab, and press "Options" button, where you can choose the partition map you want: GUID, MBR or Apple Partition Map. Note that you won't be able to start an Intel-based Mac from a drive that uses Apple Partition Map

  • May I use same transceiver MGBLH1 for linksys2024 and also for the module WS-4448-GB-SFP ?

    Hi everybody,
    I need to connect 35 nos switches linksys SRW2024 to one switch Cisco Catalyst 4503 - module WS-4448-GB-SFP, with single mode fiber optic.
    So my question is, what kind of transceiver can I use to connect the switches? I will use also fiber patch panel, and I need to know also what kind of connectors,and patch cords I need for this one?
    I have a few transceivers MGBLH1, this kind may I use also for WS-4448-GB-SFP?
    Thanks in advanced for any help from you!

    Typically, you cannot use a Linksys SFP modules within a standard Cisco switch due to a software compatibility check between the equipment and the SFP module.
    For the Cisco switch, the following compatibility document provides the part numbers for your equipment.
    <http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html>
    I don't know if the Linksys has the same compatibility check software, but I would assume so.  It also prevents the user from purchasing SFP's from a third-party manufacturer.
    Both the Cisco  SFP modules use LC style connectors.
    Hope this helps!

  • Using same External drive for iMac and iBook

    Hello all,
    I have a 15" FP iMac 10.2.8 and iBook 10.3.9 and a wireless Linksys router which is about 4-5 years old. All work on the Linksys network. Currently my LaCie external is hooked to the iMac.
    I want to have my external LaCie accessible to both computers for storing Final Cut video files. Is this as simple as connecting the LaCie to the router? I can connect to the LaCie via the ibook through the wireless network now but for accessing video files I assume this is not sufficient; need a physical connection.
    Thanks,
    Al

    You'd get problems. The ports are equal though. 
    http://www.macintouch.com/readerreports/firewire/topic2199.html
    You could connect an Ethernet-based Hard Disk to the router but it's going to be pretty slow compared to the Firewire connection you're accustomed to. If I were you I'd just hot-swap the Firewire drive between the two Macs.
    mrtotes

  • VPN ASA inside Interface and ip pool are one same Subnet

    Hi Everyone,
    I have configured RA VPN full tunnel.
    Inside interface of ASA is
    Vlan1                    inside                 10.0.0.1        255.255.255.0   CONFIG
    ip local pool 10-pool 10.0.0.51-10.0.0.100 mask 255.255.255.0
    Need to know is it good design to have both on same subnet?
    When i access the Switch  connecting to VPN ASA  inside interface via--https://10.0.0.2
    which has IP 10.0.0.2  while using Remote VPN connection to ASA it does not work gives error
    message as below
    Jan 19 2014 19:42:46: %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.0.0.51/51077(LOCAL\ipsec-user) dst inside:10.0.0.2/443 denied due to NAT reverse path failure.
    Jan 19 2014 19:42:57: %ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.0.0.51/51078(LOCAL\ipsec-user) dst inside:10.0.0.2/443 denied due to NAT reverse path failure
    Jan 19 2014 19:42:59: %ASA-6-302014: Teardown TCP connection 22418 for outside:10.0.0.51/51069(LOCAL\ipsec-user) to identity:10.0.0.1/443 duration 0:01:08 bytes 1035 TCP Reset-O (ipsec-user)
    Jan 19 2014 19:42:59: %ASA-6-106015: Deny TCP (no connection) from 10.0.0.51/51069 to 10.0.0.1/443 flags FIN ACK  on interface outside
    Current NAT config is
    nat (inside,outside) source dynamic any interface
    Regards
    MAhesh
    Message was edited by: mahesh parmar

    Hi Mahesh,
    It should work but I generally would not suggest having the same network on the LAN and also configured partially as a VPN Pool network.
    Your problem at the moment is simply lacking the NAT0 configuration for the traffic between LAN and VPN Pool.
    I would suggest changing the VPN Pool first and then configuring this
    object network LAN
    subnet 10.0.0.0 255.255.255.0
    object network VPN-POOL
    subnet
    nat (inside,outside) 1 source static LAN LAN destination static VPN-POOL VPN-POOL
    We have to use the line number "1" in the above command so that it gets moved to the top since your current Dynamic PAT would otherwise override it.
    In the future it would be best if you changed your current Dynamic PAT configuration to this
    nat (inside,outside) after-auto source dynamic any interface
    We simply add the "after-auto" to this Dynamic PAT configuration so that it gets moved down in priority. The "after-auto" refers to the fact that this NAT will be inserted after Auto NAT (after Section 2). Your current rule is Manual NAT (Sectiom 1). The new rule will be Manual NAT (Section 3)
    - Jouni

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • HT204053 I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both

    iForgot.com

  • HT204053 Can I use the same Apple ID for iMessage and FaceTime services from two different devices - iPhone and iPad?

    Can I use the same Apple ID for iMessage and FaceTime services simultaneously on two different devices - iPhone and iPad? It seems those are competing to each other, and the services work on one of them only (iPhone).

    Many thanks, Sir! Both are mine and it's good to know that imessage can work on both with the same Apple ID. Will now have to find out why imessage stopped working on iPad when it started on iPhone (new). After exploring the forum I understand  that there may be plenty of reasons why imessage does not work, even though it worked previously on the same device with the same ID.

  • Use different DPS accounts for iPad and Android versions of same app?

    Hi there,
      When creating an Android version of an iPad DPS app should the account used to create the content (the 'Title ID' in the DPS App Builder) be the same for both versions, or different? In the content viewer I know that iPad content will show up even on Android, so I'm thinking that the answer is probably no, but I haven't managed to find it mentioned in the Adobe docs.
      Thanks,
    Toby

    It depends, but usually the answer is that you want to use a different account for iOS and Android. Not all features supported in the iOS viewer are supported in the Android viewer. For example, if you use panoramas or iOS-specific web views in your articles, you'll want to be able to use different content for the Android viewers. Search for "dps supported features" for a comparison chart.
    I use different Application accounts for my apps. I use the Share/Copy feature to transfer the folios from the iOS account to the Android (or Windows) account. Then I delete the few articles that don't work well in the viewer and replace them with articles generated from different source files. That works well and doesn't require too much extra effort.
    If you want to reduce the amount of letterboxing in Android viewers, you'll definitely want to use different accounts and use, for example, 1280x800 folios instead of 1024x768.

  • Is there any constrain in using the same order type for MTS and MTO

    Hi,
    i have the constrain to use single production order type .
    Can i use single order type for MTO and MTS.
    is there any constrain in using the same order type for MTS and MTO.
    pls help me.

    Hi,
    There is no constraint or limitation in using the same production order type for MTS and MTO . Settings in requirement class and material master will mainly control whether the flow is MTS or MTO.
    Regards,
    Mrinal

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.  I have installed the gear drivers, uninstalled and installed itunes still showing same error.  Anything else?

    When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
    I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
    What else can I do.  Cannot connect any of our iphones or ipods to itunes because of this error. 

    I have edited the registery,
    We'd better have a closer look at the keys to see what's going on.
    Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window.

Maybe you are looking for