Using same string indicator in different stacked sequences

Hi guys, I want to use the same string indicator in different stacked sequences. I tried to wire the output of every string constant through the sequence to my string indicator outside the sequence block but then I get an 'Wire connected to an undirected tunnel' error. What is the best way to use the same indicator for all the sequences?
Solved!
Go to Solution.

GerdW wrote:
GerdW wrote:
@TiTou:
Problems with copy&paste?
not even :-o
GerdW wrote:
@TiTou:
Problems with copy&paste?
not even :-o
see : http://forums.ni.com/t5/Feedback-on-NI-Discussion-Forums/Text-lines-and-images-get-duplicated-when-I...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

Similar Messages

Change the colour of lines in the same string indicator.

Hi everybody,
I'm getting crazy, because I'm looking for the way to change the colour of
the lines I want in the same string indicator.
I'm doing an application to control an instrument by serial port, and I'm
concatenating the lines that this instrument gives me, but there is some
line that I would want to change its colour, because there has been an alarm,
for instance. And I only can change all the string.
Is there any way to do this? I don't know.
Could you please help me?

Thank You Very Much.
The fourth step is a little bit difficult to understand, but what I've done
is all the three first steps, and in the fourth one I've made an array (I32)
of the lines that I don't want to highlight and connect it to Disabled �tems.
Do you think this is a good solution?
Thank you again for your help. I really needed someone to help me, because
if not I would still be with the STRING INDICATOR.
Timothy John Streeter wrote:
>Hi Carlos>>I'm sorry for being too brief with the last email.>>1) Place
an 'Multiple Selection Listbox' on your front panel.>>2) Create an attribute
node. Make the attribute 'Item Names'.>>3) Put every completed line into
the last element of an array, and then pass the array
>to the attibute node. (This build the list>of strings in the Listbox).>>4)
To highlight a line, make an array containing the line numbers (I32) that
you want
>highlighted and pass it the terminal of the>Listbox.>>Hope this is more
helpful>>Tim>>Carlos Jorge wrote>> Thank you for your help, but I don't
understand what you have told me. What>> I have to pass to the indicator
node, and what is this indicator node? My>> problem now is the last thing
I have to do.>>>> Could you please explain my doubt with more detail?>>>>
Thank you a lot.>> Timothy John Streeter wrote>
>Hi Carlos>>Try using a 'Multiple Selection List Box' indicator instead of>>
a string indicator. You>> >can highlight a line by adding the line>number
to an array and pass it to>> the indicator node.>>Tim>>Carlos Jorge Granadino
wrote>> Hi everybody,>>>>>> I'm getting crazy, because I'm looking for
the way to change the colour of>>>> the lines I want in the same string indicator.>>
I'm doing an application>> to control an instrument by serial port, and I'm>>
concatenating the lines>> that this instrument gives me, but there is some>>
line that I would want>> to change its colour, because there has been an
alarm,>> for instance. And>> I only can change all the string.>> Is there
any way to do this? I don't>> know.>>>> Could you please help me?>>

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

Using same program-id in different RFC adapters

Hi,
I have the following question:
Is it possible to use the same program-id in different RFC adapters for the same SAP backend?
In gerneral, what are the naming-conventions or best practices for using program-ids for RFC adapters?
Thanks for your answer!
best regards,
Hannes

No,
You should not use same program ID for different RFC adapters. It is recommended by SAP (check FAQ's on RFC).
Although technically you can use but it gives you unpredictable behaviour based on connection pool.
Regards,
Satish

How to Use Same Asset Number with Different Sub-number

Hi
We want to sell some assets and buy them back on lease. We want to use same Asset number with different sub-number under the same company code. This new asset will be under different Depreciation Area (Statistical).
We use external numbes for assets . And same asset number range is used by all compnay codes.
Please suggest whether this is possible & how.
With Regards,
Nitin

Hi,
Go to field status for asset master data section and change the field status to optional for field Deactivation date, then follow the below steps.
You can create an sub asset number to an asset, which is already deactivated by retirement as like normal sub asset creation with AS11.(While creating sub number, you need to remove cap date and deactivate dcate field manually from asset master)
With this you can get new asset number as same as your old retired asset main number and but sub number will be different.
To post to diff dep area, other than 01, then you first create an acq transaction type, which will post only to specific areas and then use the new asset number in ABSO to post acq with your custom TTY.
I have tested and found working well in my system............Try now in your test client
Thanks,
Srinu

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

How to use same DFF for two different forms with :BLOCK.field reference

Hi,
Can anyone suggest how to use the same dff in two different forms by using :BLOCK.field reference.
Scenario is the same DFF is referenced by two forms, viz. Form-1 & Form-2.
Form-1 Reference Field is :BLOCK.field name, but the same block is not available in Form-2, which throws an error while opening it.
Any pointers please.
Thanks,

In the environment I currently have access to do not have similar setup.
Let say you setup the DFF1 default value to $HEADER.customer_name, the name of the DFF is CUSTOMER_NAME, description can be anything.
In DFF2, default value should be a SQL, where you can reference the DFF1. For example, SELECT DECODE($FLEX.CUSTOMER_NAME, 'ABC', 1, 'DEF', 2, NULL) FROM dual
In this case, you can reference the DFF1.

Can we use same SOAP ACTION in different environments?

Hi All,
I have a doubt.
Can we use same SOAP Action URL in different environments i.e suppose say Quality, Production and Pre production.And the Target URL is different in both environments.
If yest what is the impact in different environment.

Hi ,
SOAP action is nothing but operation/method in webservice .
Usually at end system end as a good practice/std they will maintain the same soap action name in all their environments,but it's always better to cross check url and soap action with end system folks before configuring in PI .
We have faced an issue in production some time back ,at target system end they upgraded their server and used new wsdl which is almost similar to existing but one of the operation they duplicated by adding few addition fields but forgot to inform PI system.Though we are using new wsdl but pointed to old soap action .Interface got failed in PROD after investigation we come to know that we are using wrong soap action
Regards
Venkat

Is it possible to use same sap script for different comp code with difflogo

I have 3 company codes. I need to use same sap script to all but each company code has different logo. I dnt want to go for 3 different sap script. Is it possible to change in coding
like this
If comp code = '100'
print ' logo1'
If comp code = '200'
print ' logo2'
If comp code = '300'
print ' logo3'
in same sapscript.If yes how ?

Hi,
Yes you can do it.
In Sap Script use:-
/: If Comp code='100'
INCLUDE ZHEX-LOGO100 OBJECT TEXT ID ST LANGUAGE EN
/:Elseif comp code = '200'
INCLUDE ZHEX-LOGO200 OBJECT TEXT ID ST LANGUAGE EN
/:Else
INCLUDE ZHEX-LOGO300 OBJECT TEXT ID ST
LANGUAGE EN
/:Endif
I hope this helps,
Regards
Raju Chitale

Using Same sql file in different database

Hi ,
I need to use same sql file which contains table ddl for sybase as well as oracle .
here If the db is sybase should run sybase ddl only and visa-ver.
Please help
Regards

Its already there, but you have any though on same file please write.My thoughts is that it sounds like a bad idea. Do you have a particular reason for wanting this in a single file?

Message-Mapping: Use same RFC lookup for different target fields

Hello,
I need to apply an RFC Lookup which delivers a boolean flag back (true or false). This RFC lookup should be used for different target fields.
Is there a way to execute the RFC lookup just once and then store the result in an internediate variable that I can use for all futher checks for different target fields?
If this is not possible and I have to apply the RFC lookup for all necessary target fields is it then executed for each target field ? This is exactly what I want to avoid in order not to slow down performance.
The input parameter (=source field value) would be the same.
Thank you for your advice!

Exactly.
Here is a UDF example I have that you could adapt to your needs.
Set
public String setCounter(String a,String b,Container container){
/* Store values in global datacontainer
a: mapping value and return valueparameter
b: name for stored value parameter
GlobalContainer myGlobalContainer;
myGlobalContainer = container.getGlobalContainer();
myGlobalContainer.setParameter(b.toUpperCase(), a);
return a;
Get
public String getCounter(String a,Container container){
//write your code here
GlobalContainer gc = container.getGlobalContainer();
if (gc.getParameter(a) != null) {
return String.valueOf(gc.getParameter(a));
} else {
return "1";

Can i use same address pool for different remote access VPN tunnel groups and policy

Hi all,
i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
thanks in advance
Shnail

Thanks Karsten..
but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below, this will achive waht i need right??
access-list 15 extended permit tcp any host 192.168.205.134 eq 80
username test password password test
username test attributes
vpn-group-policy TEST
vpn-filter value 15
group-policy TEST internal
group-policy TEST attributes
dns-server value 192.168.200.16
vpn-filter value 15
vpn-tunnel-protocol IPSec
address-pools value existing-pool
tunnel-group RAVPN type ipsec-ra
tunnel-group RAVPN general-attributes
address-pool existing-pool
default-group-policy TEST
tunnel-group Payroll ipsec-attributes
pre-shared-key xxx

Update Library of a person using same music files but different login

I use iTunes with Windows. The songs are saved in "my files". I am using Windows XP Verion 5.1 My wife uses also iTunes on the same computer but with a different login. When I add files to iTunes my library is up to date but not hers. What can I do?
Windows XP Verion 5,1

Have a look at this article on sharing iTunes and see if it does what you are looking for. It was written for iTunes 4 but the version doesn't matter:"iTunes: How to share music between different accounts on a single computer" http://docs.info.apple.com/article.html?artnum=93195

Issues of using same enhancement set for different components

Hi experts,
I have an issue when using the same enhancement set(ZCRM_EHSET) for two different components IUICMD & IUICMRD. Component IUICMRD has two views IUICMRD/MainVS & IUICMRD/MeterReading and these views have been copied to Component IUICMD.
Now, i am getting the following error, when i try to access AccountSearch view of component IUICMD
Context initialization failed in view IUICMRD/MeterReading of UI Component IUICMD
An exception has occurredException Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_IUICMD_BSPWDCOMPONENT_IMPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_IUICMRD_BSPWDCOMPONENT_IMPL
Method: CL_IUICMRD_METERREADING_IMPL=>DO_INIT_CONTEXT
Source Text Row: 10
Let me know how i can solve this. Is there any precautions that i should have taken before using the same enhancement view for two different components.
Thanks in advance.......................
Regards,
Prabahar

Hi Bharathy,
Thank you for the reply which helped me to come close to the solution.
I hope you reply will solve the second part of my question where i get MOVE_CAST_ERROR.
My first Question is still unanswered and i request you to provide solution if you have any. I worked on CRM 4.0 and CRM 2007 is new to me.
My first question is below.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
Is it the std behaviour that views from one component is copied to other when you try to use the same enhancement set? Kindly let me know if you faced similar situation.
Best regards,
Prabahar

Using same data in 2 different grids

Hi
Im wondering if it is possible to do this in FRStudio.
I have 2 grids in one report. Both grids come from a different datasource
ie:2 different cubes.
I want to use the same prompt selection (use the same data) for both grids but without having 2 seperate prompts selections.
I can merge prompts on 2 grids coming from the same datasource but it seems I cant when they are from 2 different datasources. Is there anyway around this?
Thanks in advance.....

well if it is possible as per your requirements, you can use 2 different source in the same grid
Thanks and Regards,
Rahul

Using same string indicator in different stacked sequences

Similar Messages

Maybe you are looking for