Using same tablix column for 2 row groups

Hi. We run 2012 enterprise. My tablix is grouped (for the most part) by hidden primary (values are 5,10,15,20) , secondary and tertiary sort columns. And a couple of visible label items that are aligned left.
Every row's data columns are completely %, $ or numerically formatted depending on a hidden helper field i've snuck into the tablix row group data fields after the tertiary sort.
The primary sort column does equate to a label that I dont show right now. In biz terms that label is actually the highest from a grouping standpoint but isnt being used right now for anything. I left it for last.
As I put the finishing touches on this report, I'd like to display that label ahead of the 4 sections it represents using the same column being occupied by the 1st (leftmost) label that is currently visible. I'd like to center it in that column on
its own row and apply some shading to the cells to its right. And show nothing in those shadded cells. All without changing my dataset if possible.
To complicate things, I'd like to follow each of the 4 sections with a completely shaded row. No data at all but grid lines can show thru shading. Again without changing my dataset. Is there a feature in ssrs that deals with this
kind of visual nuance?

Hi Jeewan,
Try this formula, If I understood your question correctly it will work for you.

Similar Messages

Using If condition in For EACH Group

Hi all,
I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
Thanks and regards
Naveed

You can add a If condition filed after the for-each field
for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
and then add anothet field which has <?end if?>
Hope this helps.
Thanks,

HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

How to use same RESULT SET for two different events

hello friends,
I need to use same result set for two different events. How to do it.
here My code,
private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
// TODO add your handling code here:
try
String selstate,selitem;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
selstate="select * from tab_places where state=?";
PreparedStatement ps=con.prepareStatement(selstate);
ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
ResultSet rs=ps.executeQuery();
if(rs.next())
jTextField1.setText(rs.getString("place_ID"));
jTextField2.setText(rs.getString("place_name"));
jTextField3.setText(rs.getString("category"));
byte[] ba;
ba=rs.getBytes("image");
ImageIcon ic = new ImageIcon(ba);
jLabel6.setIcon(ic);
in=true;
catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
} how do i get dat resultset,
help me out

One post wasn't enough?
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
db

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
<b>Reward points if it helps you.</b>
Regds,
Rama.Pammi

Can i use same address pool for different remote access VPN tunnel groups and policy

Hi all,
i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
thanks in advance
Shnail

Thanks Karsten..
but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below, this will achive waht i need right??
access-list 15 extended permit tcp any host 192.168.205.134 eq 80
username test password password test
username test attributes
vpn-group-policy TEST
vpn-filter value 15
group-policy TEST internal
group-policy TEST attributes
dns-server value 192.168.200.16
vpn-filter value 15
vpn-tunnel-protocol IPSec
address-pools value existing-pool
tunnel-group RAVPN type ipsec-ra
tunnel-group RAVPN general-attributes
address-pool existing-pool
default-group-policy TEST
tunnel-group Payroll ipsec-attributes
pre-shared-key xxx

Different measures use same source column but gives different values in SSAS project

I've inherited a SSAS project. I'm currentlig gaining knowledge, but do not understand this: There are 4 measures that get data from same source table and column. Example measures:
[Started]
[Processing]
[Processed]
[Finished]
All of them gets data from a table (view), and a column "Event_count" with just value 0 in each row. Usage of the measure is "Count of non-empty values".
Correctly all of these measures gives different values, but I don't understand how since they all go against the same source column. I thougt maybe they were defined in Calculated measures, but nothing there. Where or what else could be affecting this behavior?
Bonus information (problem): One of the measures is returning blank/empty, which is why started with this research at all.
Help anyone?
regards .r

Hi ,
I would ask if all the measures are under the same measure group ? It is important to know, since in the dimension usage we are creating relationships between dimensions and measure
groups .
Did you try the delete all the calculation's code and leave only the " CALCULATE ; " part ? Do the values change after deploying the slim script ?
Are all properties the same ? defaults & caching ?
Regards, David .

Issues of using same enhancement set for different components

Hi experts,
I have an issue when using the same enhancement set(ZCRM_EHSET) for two different components IUICMD & IUICMRD. Component IUICMRD has two views IUICMRD/MainVS & IUICMRD/MeterReading and these views have been copied to Component IUICMD.
Now, i am getting the following error, when i try to access AccountSearch view of component IUICMD
Context initialization failed in view IUICMRD/MeterReading of UI Component IUICMD
An exception has occurredException Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_IUICMD_BSPWDCOMPONENT_IMPL is not compatible, for the purposes of assignment, with target type \CLASS=CL_IUICMRD_BSPWDCOMPONENT_IMPL
Method: CL_IUICMRD_METERREADING_IMPL=>DO_INIT_CONTEXT
Source Text Row: 10
Let me know how i can solve this. Is there any precautions that i should have taken before using the same enhancement view for two different components.
Thanks in advance.......................
Regards,
Prabahar

Hi Bharathy,
Thank you for the reply which helped me to come close to the solution.
I hope you reply will solve the second part of my question where i get MOVE_CAST_ERROR.
My first Question is still unanswered and i request you to provide solution if you have any. I worked on CRM 4.0 and CRM 2007 is new to me.
My first question is below.
I have two components IUICMD & IUICMRD. I have enhanced 4 views in the first component IUICMD using enhancement set ZCRM_ENHSET. There is no problem with that. But when i try to use the same enhancement set ZCRM_ENHSET for enhancing the second component IUICMRD, it's enhanceable in enhancement set. But 2 views IUICRMD/Meterreading & IUICMRD/MainVS is also copied to first component and available as enhanceable views in First component.
Is it the std behaviour that views from one component is copied to other when you try to use the same enhancement set? Kindly let me know if you faced similar situation.
Best regards,
Prabahar

Use same image column twice in a report

Hello,
I have a question which is, can I use a same image column (example column A) twice in a report? first occurrence (column A) will show the image thumbnail and the second occurrence (column A) will show image download link which opens image in a new window. Is it possible?
Thanks
Pravish

LA-APEX-DEv wrote:
Yes, it's possible. However, if you intent to have two different images, then I would suggest you use a javascript to link or download the blob.
What on Earth for? Why is JavaScript necessary to download two different images? Even if this were in any way true, the OP is clear that the displayed thumbnail and download link involve the same image.
To accomplish this task, you either use decode or create a union query.
No, all that should be necessary is to reference the image column twice in the report query projection, and apply a download format mask to one column and an image mask to the other. That the OP has apparently failed to do this probably indicates that they are unnecessarily complicating things.
For example:
select '<a href="javascript:downloadImg(' || image_id || ');"><img src="/i/download.gif"></a>' link_col
from table
where allow_view = 'Y'
union all
select '<img src="/i/folder.gif">' link_col
from table
where allow_view = 'N'
or
select decode(allow_view,'Y',
'<a href="javascript:downloadImg(' || image_id || ');"><img src="/i/download.gif"></a>',
'<img src="/i/folder.gif">') link_col
from table
What is downloadImg? it is not a standard APEX JavaScript API. It is therefore highly unlikely that this is of any use to the OP.

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

Multiple Macs using same Apple ID for iTunes

I have two macs, and I've been trying to download itunes purchased content onto one that I purchased on the other. I'm using the same Apple ID for iTunes access on both, but now it won't let me download, giving me that infuriating message about only being able to associate a device with one Apple ID over a three month period. I've neved used any other Apple ID for this, so I'm very confused about what could be happening. Only started after "upgrading" to iOS5 and iCloud.

iTunes Match is associated with only one Apple ID and cannot be shared across Apple IDs. For your wife to make use of iTunes Match and see the music in the cloud she must login to your Apple ID on the iTunes Store and she will have to stay logged in. This may cause difficulty when updating apps purchased with her Apple ID.
Also keep in mind that a computer can only be associated with one Apple ID for iTunes Match, automatic downloads and re-downloading of content once every 90 days: http://support.apple.com/kb/HT4627.

Find My Phone - can I use same user + password for 2 phones?

Just loaded the "Find My Phone" App on my new iPhone 4 and set it up. What a great tool for locating a lost iPhone. The only problem is that my wife and I have a joint mail and apple ID account.
So, my question is can I use Same user name (mail account) and password for TWO iPhone 4's (mine and wifes)? I assume that would work since each phone has a different serial number, and it seems to be ok when connected to my computer to sync each phone separately.
Any help would be appreciated, thanks.

My phone was stolen a few days ago. It must be flat by now, I have had it locked by my service provider, Find my Phone still works but says it's in Sydney, I live in Melbourne. Is this accurate? How can it still find the phone if it's not on?

How to use Same Inspection plan for Multiple Plants?

Hello,
When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
Thanks
SAP Fans...

Dear,
For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
Regards,
Prasobh

Using same tablix column for 2 row groups

Similar Messages

Maybe you are looking for