Using sample XML file from technical specifications, need a little help

Hello,
I copied and pasted the item text from the sample in the Apple technical specification. But there are a couple of places where I'm not clear what to change. I have a .M4V video file that I'm trying to podcast.
Where it says "length" I don't know what it's looking for, I already entered a "duration" just below. Also, what would be the correct term for "type" for a .M4V video file?
Then, there is the "guid" number and the actual file name as it is at the website. Can I make up any guid number, or does there have to be something at the site also called this, like the video file, which already has a name....confused.
Thanks,
TW
BOXX Windows XP Pro

Okay, I figured out what those entries needed to be, but I'm still not getting iTunes to recognize the feed.
When I put the text file on the server, what do I call it so iTunes finds it?
TW

Similar Messages

Using session.xml file from WorkB in a Session Facade based on another xml

Hi
I have the follwing scenario.
Need to read data from a set of tables and convert them into an XML file based on an XSD.
I am planning to use Toplink POJO in JDeveloper to create a SessionFacade to read the values.
I tested the SessionFacade using a client and I was able to read the values correctly.
Based on my xsd, I created a project in Workbench and mapped the classes created earlier, I was able to test this mapping using a test xml data file.
I was able to read the file, Unmarshall it, manipulate it and generate an XML.
Now the question is how do I call this Marshalling from my SessionFacade ?
Since two session.xml files are in different format, I could not copy the content from one file into another.
How do I create a JAXBContext based on a different session.xml?
Thanks
Sambath
Oracle Consulting

Hi Doug,
Thanks for the response. I did the same and I was able to make it work, soon after I posted. I should have updated it :-)
I used two sessions file.
The OXM expected the name of the file to sessions.xml and I have to keep it that way. I created a ormsession.xml using JDeveloper and referred the ORM Project created in the Workbench to use it for ORM . In fact I created a dummy ormsession.xml file in JDeveloper wiht a session named "default". I started by creating an entry manually by copying the contents of the session definition and renamed to "MySession"
Once again thanks for following up
Thanks
Sambath

Creating sample XML file from Oracle Reports

I did a search and could not find a good answer - hopefully this is not a dumb question.
We are getting around to evaluating this tool, and I have looked at the whitepapers/user guides. I viewed the flash demo on how to build a template using the add-in. All of this seems really easy to do once you have the XML file generated.
We have a custom report that outputted to PDF. Its a very simple report, so I went ahead and switch the output type to XML. When I go to view the file through the View Output button, it gives me an error about not being able to view it - the error says it cannot display the XML data with the current style sheet - gives a line number for the temporary file and thats about it.
Question is this - should I be able to see the XML file through concurrent manager, or do I physically have to go the ouput directory and grab the file? I understand the whole process of hooking up a template to a concurrent program once I create it, but I figure having the data would make creating the template easier. Sort of a chicken and the egg things.
Thanks!

That sounds like a browser issue.
once you flip the output to XML the 'Output' file from the concurrent manager will now be XML, try doing a save as rather than opening directly or use Tools>Copy file.
Regards, Tim

Reading a XML File from server in BI Publisher

Hi All,
Can any one help me how i can get the XML file from server to BI Publisher using data source.
The file should transfer directly to BI Publisher with out storing it in any local directory in local system.
Thank you
Shalini.

Shalini
Do you mean that you have another system that is going to serve up the XML data and you want BIP to be able to pick it up as a data source ?
Couple of options:
1, If the XML filename can remain static you can use the 'XML File' datasource. You need to set up a directory on the server and then maybe create a dummy XML file to start with upon which you can build a report. Then have your external data generator put the file into that directory and then schedule the report so that BIP will pick and report.
2. IS the data generator accessible via HTTP or web service - BIP supports those too.
3. More complex but with a little effort you can create a servlet that will pick up the file from a directory and serve it up to BIP on demand - Im going to write about this on the blog this week
Regards
Tim

Reading XML file from server in BI Publisher

Hi All,
Can any one help me how i can get the XML file from server to BI Publisher using data source.
The file should transfer directly to BI Publisher with out storing it in any local directory in local system.
Thank you
Shalini.

Shalini
Do you mean that you have another system that is going to serve up the XML data and you want BIP to be able to pick it up as a data source ?
Couple of options:
1, If the XML filename can remain static you can use the 'XML File' datasource. You need to set up a directory on the server and then maybe create a dummy XML file to start with upon which you can build a report. Then have your external data generator put the file into that directory and then schedule the report so that BIP will pick and report.
2. IS the data generator accessible via HTTP or web service - BIP supports those too.
3. More complex but with a little effort you can create a servlet that will pick up the file from a directory and serve it up to BIP on demand - Im going to write about this on the blog this week
Regards
Tim

ScanNGo - Using localbackup.xml file

Hi All, Wondering if someone would be able to help us out, we have hundards of CN51's and CN50's through AUS and NZ and have been looking into this ScanNGo barcode system. AUS have successuflly used the .XML file from the localbackup via SOTI Mobicontrol deployment system, but am trying to make it as easy as possible as with SOTI we still need to setup an APN connection before being able to connect to the device, so hence why am looking at the ScanNGo to atleast setup the APN. Searching the forums and I see people have had success in using the ScanNGo creator by using the localback.xml from the SmartSystems folder. Unfortunately this does not seem to work for me, it will scan all 9/9 barcodes from the ScanNGo system but then returns an error "Error reading scanned data into xml" Attached is the localback.xml file from which I can apparently use this file with the ScanNGo barcode creator ? Could someone please correct me if i'm wrong on this. Thanks, Much appreciated.

Hello AdamD
first, it is no good idea to apply a full backup xml to a device. You should only change the settings different from factory default. See other posts here about how to create a configuration xml with only changed settings.
secondly, a backup xml does not contain security data like passwords. So the backup xml does not have the WWAN password(s):
<Subsystem Name="WWAN Radio">
<Field Name="ARD Enabled">
0</Field>
<Field Name="RadioType">
2</Field>
<Field Name="Restore Connection Entry Defaults">
0</Field>
<Field Name="Radio Power State">
1</Field>
<Field Name="Carrier">
Worldwide UMTS</Field>
<Field Name="Carrier Settings Auto Config">
Enabled</Field>
<Group Name="Carrier Settings">
<Field Name="Restore Connection Entry Defaults">
0</Field>
<Group Name="Connection Info" Instance="Verizon">
<Field Name="Connection Name">
Verizon</Field>
<Field Name="Phone">
#777</Field>
<Field Name="APN"/>
<Field Name="Username"/>
<Field Name="Password"/>
<Field Name="AlwaysOn">
0</Field>
</Group>
<Group Name="Connection Info" Instance="ATT">
<Field Name="Connection Name">
ATT</Field>
<Field Name="Phone"/>
<Field Name="APN">
wap.cingular</Field>
<Field Name="Username"/>
<Field Name="Password"/>
<Field Name="AlwaysOn">
0</Field>
</Group>
<Group Name="Connection Info" Instance="Sprint">
<Field Name="Connection Name">
Sprint</Field>
<Field Name="Phone">
#777</Field>
<Field Name="APN"/>
<Field Name="Username"/>
<Field Name="Password"/>
<Field Name="AlwaysOn">
0</Field>
</Group>
<Group Name="Connection Info" Instance="Worldwide UMTS">
<Field Name="Connection Name">
Worldwide UMTS</Field>
<Field Name="Phone"/>
<Field Name="APN">
Spark</Field>
<Field Name="Username"/>
<Field Name="Password"/>
<Field Name="AlwaysOn">
1</Field>
</Group>
</Group>
<Group Name="WWAN Information">
<Field Name="Phone Number">
Not Available</Field>
<Field Name="Firmware Revision">
REVISION 03.001</Field>
<Field Name="ESN">
990004190136592</Field>
<Field Name="IMEI">
990004190136592</Field>
<Field Name="IMSI">
505013475281816</Field>
<Field Name="Network">
Telstra Mobile</Field>
<Field Name="Model">
PXS8</Field>
<Field Name="Manufacturer">
Cinterion</Field>
</Group>
</Subsystem>
As you can see, the "WWAN Information" is nothing to be used for a configiration xml. And you see that there are no passwords.
AFAIS the only WWAN settings you need to setup the connection is:
<Group Name="Connection Info" Instance="ATT">
<Field Name="Connection Name">ATT</Field>
<Field Name="Phone"/>
<Field Name="APN">wap.cingular</Field>
<Field Name="Username"/>
<Field Name="Password"/>
<Field Name="AlwaysOn">
0</Field>
</Group>
But keep in mind that you have to maintain the xml structure around this.
~josef

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

Create a xml file from an internal table: CALL TRANSFORMATION

Hello gurus,
I want to create a xml file using data from scustom table. I will create an internal table and will select some records to it.
I searched the forum and i discovered the call transformation, but when i execute the example program at the CALL TRANSFORMATION shows a dump screen.
How we create a xml file from internal table??
Please help me. I will mark the useful answers.

I'm using if_ixml class to create xml documents
TYPES: BEGIN OF xml_line,
         data(256) TYPE x,
       END OF xml_line.
DATA: o_ixml          TYPE REF TO if_ixml,
      o_document      TYPE REF TO if_ixml_document,
      o_element       TYPE REF TO if_ixml_element,
      o_streamfactory TYPE REF TO if_ixml_stream_factory,
      o_ostream       TYPE REF TO if_ixml_ostream,
      o_renderer      TYPE REF TO if_ixml_renderer.
DATA: t_xml_table     TYPE TABLE OF xml_line,
      v_xml_size      TYPE i.
o_ixml = cl_ixml=>create( ).
o_document = o_ixml->create_document( ).
* The o_document have a set of methods to add elements, attributes, etc.
o_element = o_document->create_simple_element(
                  name = 'RootNode'
                  value = 'some text'
                  parent = o_document ).
o_streamfactory = o_ixml->create_stream_factory( ).
o_ostream = o_streamfactory->create_ostream_itable( table = t_xml_table ).
o_renderer = o_ixml->create_renderer( ostream = o_ostream document = o_document ).
o_renderer->render( ).
v_xml_size = o_ostream->get_num_written_raw( ).
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    bin_filesize = v_xml_size
    filename     = 'C:a.xml'
    filetype     = 'BIN'
CHANGING
    data_tab     = t_xml_table.

Need a little help with dial setup on CME

I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks.   I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN.   My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
What's happening is this. I can dial local numbers in my area as 7 digits or 10 digits. The phone company doesn't yet force us to dial area code and number for local calls (10 digits). I can still dial 7 digits.   But...if I put an entry in CME that looks like this....
(by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513. I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9.......   Understand what I mean?   Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...BUT...here's the interesting thing. If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN. It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late.   It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
I'm more familiar with how to setup dialing in the Avaya via ARS. My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does. I just need some pointers and examples to look at :-)   I think I've almost got it....but I'm just missing something at the moment.
Just so you understand, the call flow should be like this: Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya. I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya.
Thanks for your help

Here is a good document that explains how dial-peers are matched in the Cisco world:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......T
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
Please rate helpful answers!

Receive XML file from CIDX adapter and Post to SAP as IDoc using XI

I have scenario where we will receive the xml file from CIDX adapter. I need to take the xml from CIDX, do the Database Lookup and post it to SAP as IDoc.
Any technical documentaion or step-by-step process documents can be very helpfull to me, since I am new to XI
Thanks
SP

Lookup in XI is used to call the target data storage system and get data from there to your mapping programme.
In XI you can do Lookup in Message Mapping, Java Mapping and in XSLT Mapping. Previously Lookup in XI was system dependent. But now what ever the system are i.e. SAP system or non-sap system(Oracle,MS SQL etc) lookup API are same.
Overview of Lookup
- Lookups are used to identify/request the data from mapping program.
- It interrupt the process and looking for data which was stored in target system.
- It get that data and comeback to process and continue with that data.
Types of Lookups in XI
- JDBC Lookup: JDBC lookup is used for accessing data from database (non SAP).
- RFC Lookup: RFC lookup is used for accessing the SAP Data.
- SOAP Lookup: SOAP lookup is used for accessing data from Webservice
Steps to perform Lookup in Mapping
Import package com.sap.aii.mapping.lookup.*;
Create connection to the target Database system.
// Determine communication channel created in ID
Channel channel = null;
channel = LookupService.getChannel("DB-SYSTEM-NAME","DB-CHANNEL-NAME");
// Get system accessor for the channel.
DataBaseAccessor accessor = null;
accessor = LookupService.getDataBaseAccessor(channel);
Build the Query String.
Getting Result
// Execute Query and get the values.
DataBaseResult resultSet = null;
resultSet = accessor.execute(Query);

Can I load xml file from SWC without using @embed

I'm developing a mobile application in which I need to load xml files from File.applicationDirectory. This works great if the xml files are part of the main application swf. But I would like to move these xml files into a SWC so they could be shared across multiple applications.
Using FlashBuilder 4.5, when a SWC is built, I can specify files to embed in the library that are not assets (Assets Tab of Flex Library Build Path). For various design reasons, I do NOT want to embed the xml files via @embed.
When the swc is built and I open it up using a zip utility, I see the xml files in there just fine. So they are being bundled with the SWC. But how can I load these files in my main application that does not involve using @embed? When the main application is built, the swc setting for link type is "merged into code".
I wouldn't expect the application to automatically pull out the xml files from the swc and place them in the File.applicationDirectory on the mobile device. I've tried loading from there just in case but file.exists is false (as expected).
I've searched the web (and continue to do so) and all the answers seem to be to use @embed. Is there another way?
Randy

It's actually a lot easier than you think.
Just reference the file like any'ol URL using a path relative to the SWC's src directory.
So if you include the file "assets/xml/some.xml", just use that same string like you would any remote resource.
For example:
var loader:URLLoader = new URLLoader( new URLRequest("assets/xml/some.xml"));
I believe it would also work like this "/assets/xml/some.xml", but I prefer relative paths so the link doesnt break if moved out of the SWC...

Error parsing XML file from a HttpServletRequest using JAXP

Hi,
I am trying to generate an XML file from an HttpServletRequest. I am actually using file uploading method in JSP to send the XML file. I think the parser isnt able to correctly identify the XML file from the message body and hence it is giving some strange error messages. Has anyone of u managed to solve this problem ?
Code snippet:
//now build an XML document from the requested input stream
InputStream in = myRequest.getInputStream();
try {
myDocRequest = myParser.parse(in);
} catch (Throwable t) {
throw new Exception("Could not build document",t);
Error message is:
[Fatal Error] :1:1: Content is not allowed in prolog.
java.lang.Exception: Could not build document
at XMLUtil.<init>(XMLUtil.java:91)
at WCS.doPost(WCS.java:44)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
at XMLUtil.<init>(XMLUtil.java:89)
... 20 more
Actually if i just print out the message, it gives something like this:
-----------------------------7d63dc71b06b2
Content-Disposition: form-data; name="W"; filename="C:\work_projects\Capas.xml"
Content-Type: text/xml
<?xml version="1.0" encoding="UTF-8"?>
<GetCapabilities version="1.0.0" service="wcs">
<section>/WCS_Capabilities/Capability</section>
</GetCapabilities>
-----------------------------7d63dc71b06b2--
Cheers.

The ServletInput stream contains this:
-----------------------------7d63dc71b06b2
Content-Disposition: form-data; name="W"; filename="C:\work_projects\Capas.xml"
Content-Type: text/xml
<?xml version="1.0" encoding="UTF-8"?>
i.e., its the HTTP File Upload MIME stuff, followed by the XML. You need to wrap around the input stream something that can decode the HTTP MIME stuff and let you get at the XML itself, i.e., something like: com.orielly.servlet.multipart.MultipartParser (Apache has a similar 'file upload servlet).
Jeremy

Reading XML file from specific location&Storing xmldata into related tables

I am new to xml.
My requirement is,
1) Get the xml file from specified location (C:\xmlfiles\ xmldata.xml)
2)Convert xml data in clob data.
3)store the data into related table.
and vice-versa.
What i did,
a) I got the data from related tables and converted into xmlformat using SQLX
b)converted this resultset into clob data and stored as xml file in specific location.
It uses more then ten tables.
All this help i got from AskTom site , thanks for that.
Now i have to do vise-versa, i.e. i have to perform 1), 2), 3) steps........
Please tell me proper steps to acheive it.
Thanks in advance for giving your precious time to solve my issue.

Have you read the"XMLDB FAQ" in this Forum?
You could use stuff like:
create or replace directory xmldir as C:\xmlfiles'
declare
xmldata xmltype;
begin
xmldata := xmltype(bfilename('XMLDIR','xmldata.xml'),nls_charset_id('AL32UTF8'));
-- etc, etc your code --
-- --> convert to clob by using for instance getclobval() function
-- --> then insert the data in your relational table with CLOB column
-- etc, etc your code --
end;
/

Re-Using XML file from decode barcode + extract xml process

I was hoping someone could put me in the right direction here. I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
Thanks

Hi,
What you may do is to use the SetValue and its xpath builder functions to "serialize" the xml into string, "substring" to remove the extra tags, and "concat" to add the extra tags and then "deserialize" it again to an xml to be merged with your form.
Greetings,
Yasser

Upload xml file from aplication server using read dataset, parser error.

Hi,
I would like to upload xml file from app. server but parser failed. If I upload this xml file from workstation (using ws_upload) it is correct. For uploading xml file from app. server I use open dataset... read dataset. In loop section I remove '#' char. How do You upload xml file from app server? What Could be incorrect.
I try to open dataset in binary mode, text mode...
TYPES: BEGIN OF xml_line,
        data(255) TYPE c,
      END OF xml_line.
DATA: gt_xml_table TYPE TABLE OF xml_line,
      gs_xml_structure TYPE xml_line,
      gv_xml_table_size TYPE i.
OPEN DATASET s FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
    MESSAGE e001(zet) WITH '....'.
ENDIF.
DO.
    READ DATASET s INTO gs_xml_structure.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
     len = STRLEN( gs_xml_structure ).
     len = len - 1.
     check len > 0.
     WRITE gs_xml_structure(len) TO gs_xml_structure.
      APPEND gs_xml_structure TO gt_xml_table.
    ENDIF.
ENDDO.

You Can do this too
parameters: p_file like rlgrap-filename.
data: subrc like sy-subrc.
create object me.
REFRESH t_data.
* Open XML File
CALL METHOD me->CREATE_WITH_FILE
    EXPORTING
      filename = p_file
    RECEIVING
      retcode = subrc.
* Saves Data in an itab from XML File.
CALL METHOD me->get_data
    IMPORTING
      retcode    = subrc
    CHANGING
      dataobject = t_data[].
Regards,
Claudio.

Using sample XML file from technical specifications, need a little help

Similar Messages

Maybe you are looking for