Using SAP Calendar for Process chains
Hi Everyone,
Is there a way to schedule the daily process chains to run from Monday to Saturdays
We do not want to run them on Sundays or holidays. Holidays here will be defined by us.
So does factory calendar do the job?
Can we change the holidays in Factory calendar?
Any insights here will be very helpful.
Thankx
Kumar.
Hi.......
You can do it in the following way........
You create a job in SM36 >> Here in the first screen give the job name >> then click on Start condition>> there click on Date/time >> give Scheduled start date and time>> Then click on Restrictions tab ( beside periodic values) >> There give the Factory Calender id and select Do not execute jobs on Sundays or holidays >> then click on Peridic values and select Weekly >> create this job using the program : BTC_EVENT_RAISE..........and in its variant maintion the event(but before that create this event in SM62)
This job will give trigger this event.............maintain this event in the start condition of the process chain...............
Then this chain will not run on Sundays.........
Or you can directly do it in the Start variant of your Process chain.................Click on Restrict and make the settings.......
Hope this helps you......
Regards,
Debjani.......
Edited by: Debjani Mukherjee on Sep 30, 2008 9:40 PM
Edited by: Debjani Mukherjee on Sep 30, 2008 9:46 PM
Edited by: Debjani Mukherjee on Sep 30, 2008 9:58 PM
Edited by: Debjani Mukherjee on Sep 30, 2008 10:14 PM
Similar Messages
-
Step by Step documents for Process Chain Error Handling with Screen Shots
Hi
Is anybody having Step By Step Documents for Process Chain Error Handling with Screen Shots ?. Please forward it to me to my e-mail [email protected] . I will reward points to u immediately.
bye
Aamira KhanHi,
You can find lots of topic related to process chain issues in SDN.Please make a search in SDN.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=process+chain&adv=true&sdn_author_name=&sdn_updated_on_comparator=ge&sdn_updated_on=&sortby=cm_rnd_rankvalue
Regards. -
BI admin cockpit for process chains
Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
BhavanaHi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS22_DELTA_DATAMART (B71) DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71) Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71) Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS01_DELTA_DATAMART Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART Data manager statistics (details) [0TCT_C03] -
Display components for process chains
Hi all,
i remember a sap note or a how to guide to configure the display components for process chains as hierarchy like:
- my chains
- daily
- weekly
- monthly
- monthly admin
- monthly xyz
but right now i find no information about that.
Do you?
thanks for your help.Hi,
Check below threads -
Change the Directory of a Process chain.
Process chain: Moving chain from one u0093folderu0094 to the other
AleX -
Test Scripts for Process Chains
Hi Gurus,
Can anybody send me the sample test scripts or the available links for process chains
to my mail Id. [email protected]
I will assign full points.
Thanks in adance.
Maruthi.Hi Maruthi,
Please go through the belwo links and let me know if you need any specific information. Also you can find lot of threads in SDN
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f4e952-e46e-2910-1f9e-cae187cd16d1
Assign points if its helpful.
Regards,
Jagadeesh. -
Re: Statistics Query for Total runtimes for Process Chain incorrect
Hi Guys,
I am building a Query for Total runtimes for Process Chain Statistics. I used the Cube 0TCT_MC21 for Query - 0TCT_MC21_Q0101.
I dragged in Keyfigure section - startdate, end date, Start time are all correct and fine but the End time (0TCTENDTIM) is coming incorrect. Is something else i should use to get the End time?
Please let me know if any suggestions?
RegardsJust check if the end times are in GMT ?? usually happens with timestamps....
-
Hi,
I have requirement to set maximum time to run the process chain.
For example:
Process chain is starting daily at 10 PM and taking time 1hr 30 min to complete process. Some times it is taking 2-3 hours to complete process.
So I need to set max. time 2 hours to complete process chain. If not completed with in 2 hours (before 12PM), then the process chain should be cancelled.
Please help me in this regard.
Thanks,
HariHi,
you can set the varaiant and schedule the max time in the variant for process chain.For the scheduled jobs in SM37, pls chk this link;
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a8009505211d189550000e829fbbd/content.htm
Hope this helps,
Regards
CSM Reddy -
Authorization for Process Chains in BW 3.5 (2004)
Hi all,
I wanted to know if there is any way to limit actions on process chains. I would like to give some users display only access to process chains. Is that possible?
ThanksHi,
In your system go to
'Transport Connection' tool-->
Click on 'Object Changeability' pushbutton-->
And for Object types RSPC and ISIP make "changeable/Not Changable" .
Note: This will work only if your system is lockect aganist the changes as it is normally in Production.
Also check the below links:
1) Authorisation for process chains
2) Authorization Object for Process Chain
3)http://help.sap.com/saphelp_nw2004s/helpdata/en/35/c7e442e3c15704e10000000a155106/frameset.htm
4) http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm -
Unable to Print Purchase order automatically using SAP GUI for JAVA
Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertzhi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com -
Connect to SAP R/3 using SAP GUI for HTML through saprouter
Hello,
I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string, but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
Thanks in advance.thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted. -
Commenting a Line in ABAP Editor when using SAP GUI for java
Hi,
In ABAP editor we can highlight the line which are to be comment and use cmd+< sign to comment those lines. What will be the command to be used to achieve the same functionality when using SAP GUI for JAVA on an iMac.Hello Kedar,
please check with SAP GUI for Java 7.20 rev 5 before submitting a bug report.
Also please verify, that cmd-< and cmd-> are not assigned as "Keyboard Shortcuts" in the "Keyboard" control panel of "System Preferences".
Bug reports can be submitted with the [SAP Message Wizard|http://service.sap.com/message], for SAP GUI for Java please use component BC-FES-JAV.
Best regards
Rolf-Martin -
Tcode PA70(Fast Entry) using SAP GUI for HTML
Hi Gurus,
when i am copying data(one row) from excel sheet into infotype using
tcode PA70(Fast Entry),through EP(transaction iview Created Using SAP
GUI for HTML).
enter TCODE PA70-> select Recurring Payments/Deductions -> click
create -> copy the data from excel sheet and past
The whole row of data is copied into one field . the data is not copied
into the corresponding fields.
please find the screenshot.
<a href="http://img337.imageshack.us/i/guiforhtml.jpg/">[IMG]http://img337.imageshack.us/img337/1723/guiforhtml.jpg[/IMG]</a>
Uploaded with <a href="http://imageshack.us">ImageShack.us</a>
Regards
K Naveen Kishore.Hello Naveen,
I don't think this is possible. Please see note 314568 about the limitations of the SAPgui for HTML (webgui), the "Clipboard access" section seems to describe this limitation.
Edgar -
Use of events in process chains
Hi All,
Could some one help me in givving me detailed information about the use of events in process chains with some examples .How are they used and what are they performed in background .I am going to start,creating process chains according to the requirements which are based on event scheduling before ..
Your detailed information is really appreciated..
Thanks & RegardsHi,
Suppose your process chain needs to be started after certain activity is finished, then you can create an event to be triggered when that activity is done. The process chain will start once it gets that triggered event.
This is one use in using events in Process Chains.
Thanks,
Raj -
Send Message Process prompting for "Process Chain to Check"
Hi, When I insert a "Send Message" Process into my chain I do get prompted to select the message.
1. When I do a pull down I am getting prompted for "Process Chain to Check".
If I select my current process chain I get an abend.
2. When I click create instead of select I get brought to a table maint "Controls the execution of Process Chains". It has process chain, Start Date, Start time, and an inactive checkbox.
Any guesses why it's asking for "Process Chain to Check"?
What is this maintenence table I'm being brought to just to create a message.
Sounds Like I've run into a bug?????
Can you help???Found out this must be related to development from a previous consultant..
thanks -
Cancel the scheduled jobs for process chains - urgent
Hi,
How do I cancel the scheduled jobs for process chains which are going to run tonight.
thanks,
RadhaHello,
Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
Look for Execution --> Remove from Schedule.
Let me know if that answered your question.
Thanks
Dharma.
Maybe you are looking for
-
I have been at my buisness for 8 years and the address does not show up as an address in apple maps on any of my devices. How can I fix this? My address is 1351 summit drive jasper al 35501.
-
Hi, I am trying to create a gui where I can browse on my desktop and load a file from there to take it to the server. Below I have taken a snipet of the code where I browse on my desktop, but my problem is this is not displayed in the textfield...(an
-
Why wont my ipod connect to my computer?
I've gone through all the steps. I've reset my ipod Put it in diskmode it only says okay to disconnect changed usb ports changed cables made sure the cable worked with other ipods used other computers. Nothing I've done works, it doesnt show up on my
-
FCP-X Compressor 3.0.5 (need chapter-markers)
Can I send a FCP-X-project to Compressor 3.0.5? I just need to set DVD-chapter-markers in there! Or do you have another idea how to set individual chapter-markers??
-
Why does my printer get the color wrong?
I am trying to print a flyet that is dark red with yellow type, yet it prints out as green with faded yellow type. Why won't the background show up as the correct color?