Using SAP User name without system/client name

Hello,
How to display and use i9d3719 instead of db1~100/i9d3719?
So if I want to lon on to designer, I want to enter i9d3719 in username instead of db1~100/i9d3719. Same goes for wneh an user logs to Webi, their username should be displayed without the SAP system and client id.
Thanks,
Nikhil

Akhil,
I hope this will never work. Think about your requirement for a second....
This would mean an application is able to see my user credentials without my knowledge. It's bad enough the know my IP if I'm not using TOR.
To get your requirement to work you have to redefine it a bit. The user have to log in to your application. The application holds the name together with an ID of the session to know the user in further requests.
Thats a basic security theme, described in the dos [Adding Security to a Fusion Web Application|http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/adding_security.htm] .
Timo

Similar Messages

  • Is it possible upgrade SAP HANA DB without system/root user??

    Hi All,
    I am supporting banking client.
    they are expecting to do SAP HANA upgrade(from OS or with HLM) .
    even some time patch Kernels also.
    my question is can we upgrade the SAP HANA system with SYSTEM user and root from OS(create different user which can support this process?)  .
    as per SAP HANA Master Update Guide.
    You have user names and passwords for the following users
    ○<sid>adm user
    ○sapadm user
    ○S-user for the SAP Service Marketplace (SMP)●
    but we need "SYSTEM" use to do upgrade process?.
    with HLM: attaching info
    Thanks
    Ravindar

    Dear Rahul,
    thank you for the response.
    But... if we activate and install a demo license on the customer's server, how can we upgrade its old SAP B1 2007 database?
    Do we have to download a last SBO 8.8 PL (i.e. PL 19) and run the upgrade wizard of this PL to upgrade COMMON db, SAP server, etc... and the old SBO 2007 cusomer db?
    Can we directly upgrade old SBO 2007 db to SBO 8.8 PL 19 or we must before upgrade to an intermediate PL (i.e. PL 14) and later upgrade to PL 19?
    Regards
        Emanuele

  • Unable to log in to SAP ES workplace HU2 system; Client 800

    Hi,
    I'm unable to access the below SAP IDES system using the link https://esworkplace.sap.com
    System  - HU2
    Client *   - 800
    User *    - P610131
    I get this message. 
    User account not in validity date.
    To log on please register on SCN: http://www.sdn.sap.com/irj/sdn/soareg
    Assistance regarding SOA can be received in the SCN forum:
    Service-Oriented Architecture (SOA) and SAP
    You can report problems on single services by creating a Customer Messages on the respective application component.
    For assistance with ES Workplace systems use CA-SOA-SWP.
    Request to provide the necessary access. If this is not the right forum to have this posted, please let me know the right forum to raise this issue.
    Thanks
    G Raj

    Hi Raj,
    It sounds like your access is expired. Have you tried re-registering?
    Best Regards, Trevor

  • Using SAP Business content with different client number

    Hi,
    I want to use and upload client numbers into SAP BW in an InfoObject as master data.
    The client number is for example with 9 figures.
    Can I use the SAP standard InfoObject 0Client for that or is there another one or should I define my own InfoObject?
    Thank you!

    You can do it in both the ways.

  • Connecting Hana with DTW using an user different to SYSTEM

    Hi experts,
    I have created an user in HANA with this privileges:
    GRANTED ROLES
    SYSTEM PRIVILEGES
    OBJECT PRIVILEGES
    AFLPM_CREATOR_ERASER_EXECUTE
    CATALOG READ
    SBOCOMMON
    CONTENT_ADMIN
    CREATE SCHEMA
    SBODEMOCL
    PUBLIC
    DATA ADMIN
    IMPORT
    I'm trying to connect HANA from Data Transfer Workbench using the new user but the program shows the error message "Exception from HRESULT: 0xFFFFFFFF" .
    If I try with SYSTEM user, the connection is successful.
    Which privileges should I assign to new User for it's correct working with DTW?
    Thanks and Regards,
    Juan Salazar

    Hi Gordon,
    I give permission SELECT, INSERT, UPDATE and DELETE to the schemas SBOCOMMON and the current schema. Also I select the option Grantable. but the problem continue.
    I try copy privileges the system user, but the user SYS is assign him and I dont know how loggin whit this user
    Thanks,
    Juan Salazar

  • How to chek the sap users from all the clients

    Hi Experts,
    I have a server which got 3 clients
    100, 200, 300 and I want to check out all the users of 3 clients at one shot
    Please let me know how to check this?
    Thanx in advance
    Regards
    Jawed

    Hi,
    I am afraid table USR02 is client-specific. Using display you can only view the records which belong to your current client. 
    You can use Tcode USMM (User measurement data)- User classification lising and view all the client users you need, or use report (RSUVM005) in se38.
    Thanks,
    George

  • How to use SAP in a single system

    i have installed sap 4.7c but my computer is not in a LAN so while starting SAP is showing RED and not starting  . how to configure this and , do anybody now about loop back

    HI,
          Control Panel ->  Add to remove Hardware ->Add/troubleshootdevice->Add new device-> No i want to select from list->Network Adapters -> Microsoft (Manufacturer)->microsoft loop back adapter->next->finish
    Give the ipaddress and in the \etc\hostfile also make the entries
    Regards
    Umesh K

  • How to use itunes user id without giving payment details

    Im trying to login into itunes but due to payment details im unable to go further in that, if any one is having resolution on this please let me know.

    Hello there Monster56,
    It sounds like you want to use your Apple ID in iTunes with no payment info. This article will help you do that:
    Change or remove your payment information from your iTunes Store account (Apple ID) - Apple Support
    Click to open your account in iTunes. (You might need to sign in with your Apple ID.)
    Alternatively, you can:
    Open iTunes.
    Click iTunes Store.
    Click Sign In and enter your Apple ID.
    Click your Apple ID and select Account Info.
    From the Account Information page, click Edit to the right of Payment Type.
    You can see the payment methods that the iTunes Store accepts in the Payment Type section. If you want to remove the payment method, select None in the Payment Type section. See what to do if None isn't showing or you can't select it.
    Change your information and click Done.
    After you change your payment information, the iTunes Store places an authorization hold on your credit card.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • UME using SAP R/3 as Data Source

    Hi,
    We are trying to set User authentication to SAP R/3 system, not load balanced system, on the User Management Configuration values: Client=501, Userid=sapjsf, Password=pwd, sys id=RS1, Group and Message server= blank, Application server= server.company.com, Sys. number=00, Max pool=10, Max wait=300000.
    When testing connection, I get this message:
    (System ID): com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'mshost' missing
    (System ID & System Number): OK
    Is this an error? since our SAP R/3 is not a load balanced system.
    Did we miss any item for the setup, in dataSourceConfiguration_r3.xml? The SAPJSF "communication user" got the right sap role and authorizations.
    Portal version : EP6 SR1
    Regards
    Huzaifah

    Hi,
    If u want to Use The SAP R3 System as Data source u may
    do it from config tool if u got following message.
    WARNING! You are not allowed to select dataSourceConfiguration_r3.xml as active configuration file.
    (For Portal Patch less than SP13 u must download two data source file which is attached with note - 718383
    and upload it to portal which is described in the note)
    the following are the procedure which i apply ,
    Go to System Administration -> System Configuration ->UM  Configuration
    Now Do not change Data source from Here.
    Make sure  your data source is "Database Only"
    (dataSourceConfiguration_database_only.xml)
    Now enter the following value under SAP System Tab.
    Client : - Your sap system client
    User:-  Sap user
    password: - password
    System language:- your system language
    Application server: - Host name or IP of sap system
    System Number : -  SAP instance number
    Maximum Size of Connection Pool : -  As per req.
    Maximum Wait Time in Milliseconds :- 10000
    Now, save the changes and shutdown the portal server.
    Using Config Tool change the data source. Run the following
    <drive:\> usr\sap\<sid>\JC<instance number>\J2EE\configtool\configtool.bat
    (Make sure the portal system is shutdown)
    Under Cluster Data -> Global Server Configuration -> services -> com.sap.security.core.ume.services
    Now find the key: -  ume.persistence.data_source_configuration     
    The default was : - dataSourceConfiguration_database_only.xml
    change the value to :- dataSourceConfiguration_r3.xml     
    click on set and from flie-> apply
    Now restart the portal server ur data source changer to SAP R3 System
    Regards,
    Kaushal

  • How can i use exisitng user data(Id, password) for user mapping

    Hi All,
    For User mapping , we can import user mapping data for many users from user administration. and for each user
    we can maintain mapping data in the standard format.
    eg:
    [User]
    uid=user2
    $usermapping$:BCE:user=ext_user2
    $usermapping$:BCE:mappedpassword=password
    i am clear till this point.
    this all works if we know the userid and passowrd on the system 'BCE'.the passwords on the system 'BCE', are encrypted . so there is no chance for me to know the passwords.
    so how can i use the existed userid/passowrd on the system 'BCE' for the mapped user and mapped password on the portal while doing usermapping.
    Thanks in Advance,
    Lakshmi

    Hi,
    I think this should work.
    1. Setup SSO with SAP logon tickets first. How to do this is described many places, e.g. http://help.sap.com/saphelp_nw04/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
    This SSO will not work at first, because the username is different in the back-end system. So what you need to do is to get the back-end username into the ticket (don't need a password because that is done by the SAP logon ticket)
    2. Create a portal component which uses the usermanagement API to create a usermapping which only consists of the username and a blank password. You can do this manually I think if you have no reference system defined.
    IUserMappingService umap =(IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
    //this is the currently logged in user. You might another user
    IUserContext user = request.getUser();
    //Get the existing data (think it can be null)
    IUserMappingData userMapping=umap.getMappingData(systemAlias, user);
    HashMap map = new HashMap();
                             map.put(IUserMappingService.UMAP_KEY_USER, backEndUserName);
    //add blank password               map.put(IUserMappingService.UMAP_KEY_PASSWORD, "");
    //store the values                    userMapping.storeLogonData(map);
    Voila, this should allow you to do SSO using SAP logon tickets, but with another name that you use against the portal. I am uncertain if this will work if you have multiple usermappings in the sap logon ticket
    PS since the sap logon ticket is issued at logon time, you need to relogon to get the changes done by the code
    Regards
    Dagfinn

  • Load a flat file into BW-BPS using SAP GUI

    Hi,
    We are using BW BPS 3.5 version, i implemented how to guide  " How to load a flat file into BW-BPS using SAP GUI" successfully without any errors.
    I inlcuded three infoobjects in the text file   costelemt, Posting period and amount. the same three infoobjects i inlcuded the file structure in the global data as specified in the how to document
    The flat file format is like this
    Costelmnt      Postingperiod         Amount   
    XXXXX             #      
    XXXXX             1                          100
    XXXXX             2                           800
    XXXXX             3                           700
    XXXXX             4                           500
    XXXXX             5                           300
    XXXXX             6                           200
    XXXXX             7                           270
    XXXXX             8                           120
    XXXXX             9                           145 
    XXXXX            10                           340
    XXXXX            11                           147
    XXXXX            12                           900 
    I successfully loaded above flat file in to BPS cube and it dispalyed in the layout also.
    But users are requesting to load  flatfile in the below format
    Costelmnt        Annual(PP=#)   Jan(PP=1)   Feb(PP=2) ........................................Dec(PP=12)  
    XXXXX              Blank                       100           800                                                   900
    Is it possible to load a flat file like this
    They wants load a single row instead of 13 rows for each costelement
    How to do this. Please suggest me if anybody accorss this requirment.
    In the infocube we have got only one Info object 0FISCPER3(Posting period) and one 0AMOUNT(Amount)
    do we need 13 Infobjects for each posting period and amount.
    Is there any possiblity we can implement any user exit which we use in BEX Quer's
    Please share your ideas on this.
    Thanks in advance
    Best regards
    SS

    Hi,
    There are 2 ways to do this.
    One is to change the structure of the cube to have 12 key figures for the 12 posting periods.
    Another way is to write an ABAP Function Module to fetch the values from each record based on the posting period and store it in the cube for the corresponding characteristic. This way, you dont have to change the structure of the cube.
    If this particular cube is not used anywhere else, I would suggest to change the structure itself.
    Hope this helps.

  • Migrating sapwsdl file using SAP ES Explorer

    Is there any way to use the existing sapwsdl file which is created using SAP connector to SAP ES Explorer?
    Our aim is to use the SAP ES Explorer with Visual Studio 2005 version.
    Or is there any other way to migrate the application using SAP ES Explorer without using service registry.Please reply as soon as possible as we are not able to proceed further.
    Thank You,
    Juhi

    Hi Juhi,
    Pls. find my comments below-
    >>Is there any way to use the existing sapwsdl file which is created using SAP connector to SAP ES >>Explorer?
    Well, you need to understand that the working and underlying principles of Connector and ES explorer is different.
    1.SAP Connector is there to expose the RFC/BAPI from SAP ERP system and provide design time and runtime support for application development.
    2. ES explorer provides access to the services published into Service Registry, which can be consumed by application.
    >>Our aim is to use the SAP ES Explorer with Visual Studio 2005 version.
    >>Or is there any other way to migrate the application using SAP ES Explorer without using service >>registry.Please reply as soon as possible as we are not able to proceed further.
    Bottom line is, if you want to use ES Explorer you would have to ensure that there exists a Service Registry and Services are publish in that.
    Hope to clarify some of your points.
    Regards.

  • SAP BPC 10.0 Web Client Blank Screen after login

    Hi ALL,
    We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
    We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
    Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
    I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
    If you have the same issue, kindly share..
    Thanks and regards,
    Hery

    Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
    Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
    Thanks and regards,
    Hery

  • CRM 5.0 system / client copy

    Hello,
    we are running  CRM 5.0 with e-commerce webshop scenario - abap+java system.
    the systems are configured in a 3 system landscape.
    the QA and prod system have the same client number.
    the customer asked to refresh the QA with PROD system.
    what is the recommended way to do it?
    do i need to do a complete production system copy - export the Prod system using sap tools from sapinst system copy and afterwards do the import into the QA system? - in this case are there any post processing things to be done regarding the NWDI which is configured on the development system and connected to all other landscape systems?also what about post proccessing of the XCS?
    the other methood is to do a client copy (just the abap) from the prod to the qa system - will it work?
    again - both QA and prod systems have the same client number - originally the QA system was installed using an import from the production (after prod system installation i exported it and imported to the QA system using R3LOAD and jload from the sapinst system copy tools)
    Regards,
    Moshe

    what is the recommended way to do it?
    QA refresh using PRO data is the recommended one if you have huge database
    Client copy is  not recommended one for huge database....
    You can find all the pre, post copy steps in standard system copy guide
    www.service.sap.com/systemcopy
    Regards
    Nick Loy

  • Decision should Not go to all SAP Users if no agent found in rule. How to ?

    I am determining user agents in rule , when agent is find decision is going to only the agent sap inbox which is fine.
    in some cases no agent is found , at that time decision is going to all SAP users in the system.
    I am using Generic Decision task with General task in agent assignment step.
    As per our requirement if no agent is found it should do nothing ( means no decision to all users ).
    Please help me how can i acheive this .
    Regards,
    VeeraBrahmam

    Hi VeeraBrahmam,
    Does you rule call a function or is it a rule with responsibilities?
    If it is a responsibility rule then you could create a catch all responsibility so if no user is found in the other responsibilities you could send the work item to a backup user or admin user who could take action.
    If you set the flag as Rick suggested it will set the work item to error so make sure you are aware of this and check work items in error on a regualr basis.
    You could copy the Generic User task TS00008267 and maybe set more restrictive users rather than have it set as general. However this means more maintainence.
    Regards,
    Eddie

Maybe you are looking for