Using SavePointRestore activities with Train Component not working.

Hello,
I am testing 'Save for Later' capabilities in 11g. I have a simple Three-Step scenario using a bounded task flow on which the SavePoint Restore functionality is working just fine. Now, If I am changing that bounded task flow to act as a Train and I am adding TrainButtonBar and Train components to each page. With this changes, when I am restoring a savepoint I am returned to the correct step, the form is populated with the correct data, but the Train and TrainButtonBar components dissapear.
Is anyone encountered this situation?
Thanks,
Florin Marcus

After little research I have notice that TrainButtonBar and Train components are not correctly deserialized from the database. If I remove them and still use a bounded flow as a train, everything works.
Florin

Similar Messages

  • Component not working

    JDEV 11.1.1.2.0 with adf 11g
    i have thow the exception in button commandToolbarButton of actionListener, after throwing exception , button commandToolbarButton working is stop , how to resolve , please help me,
    regards,

    Hello all,
    I am facing an issue with CommandToolbarButton. On Click of the button, I am not able to call the actionListener backingbean method. I have default PartialSubmit true and immediate to false. It does not throw any error but just does not call the method. Here is the code :
    <af:commandToolbarButton id="commandButton1"
    actionListener="#{backingBeanScope.xxxBean.addRecord}"
    icon="/add.gif"
    shortDesc="#{ViewControllerBundle.ADD}"
    partialTriggers="t5" immediate="false"/>
    However, with similar code on another fragment, I am able to call the action listener.
    Can anyone let me know what the issue could be with the component not working on this page ?
    Thanks,
    Victor

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • I am using laptop hitting and slow system not working

    i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

    Hi,
    Shut down the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
    Note:  If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
    Can you also post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Problem with HP SimpleSave not working

     I have a 1TB HP SmartSave external HDD, before hand it was with my father and I recently tried to use it again. It's not working, and here are the details:
    - When it's plugged in my laptop recognizes it as a CD drive, but one with only 884 KB of space
    - Upon clicking the drive, the only thing there is the HP Launcher (552 KB), and I'm guessing this is the problem.
    - Obviously, clicking the launcher does nothing.
    - I tried looking into the problem and saw the solution about downloading the SimpleSave's software and launching it from inside the HD, but I can't do that because according to my laptop the HD only has 884 KB of space. Any attempt to copy files to the location or extract them there comes up with a "not enough space" error.
    - I'm also unable to delete the current HP Launcher application or format this thing.
    So, any ideas? I NEED YOUR HELP!!!!

    Hello malehussey,
    The HDD is not being seen and the limited space is the CD emulator thats attached to the drive being reported.
    The CD emulator is a bridge that has to be used for SimpleSave to work.
    Have you tried using it in another computer to rule out any issues with your laptop?
    If it does work, we can go from there.
    Can you tell if the hard drive spins when plugged in?
    Also go into Disk Management to see if the HDD is recognized or shows as Unallocated Space. Right click My Computer and choose Manage/Disk Management (depending on which operating system you have).
    If it does not show at all, its most likely that the hard drive has met its end of life.
    You could go further (if you like tinkering) and tear the case apart, remove the CD card attached to the HDD and hook the HDD directly to a SATA port on a desktop type of PC with a SATA cord. Also you can use a USB to SATA adapter or a HDD Dock to plug the drive into a laptop. Then you can see if the drive will work properly. If it does, then theres a problem with the CD card or connection in the case. The case alone cannot be used to connect the HDD without the CD card installed because of the hookups.
    If you can extract the files saved on the SimpleSave drive, you will not be able to use any SimpleSave backups (and possibly any other files saved either) unless you have the CD card hooked to the drive first. The CD card encrypts and decrypts the data on the SimpleSave drive.
    Bottom line, its most likely time to buy another external drive. 

  • FIND with MATCH OFFSET not working

    Hi,
    I have a statement:
    FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
    this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
    (i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
    *In this case off2 = .
    Value of sy-subrc is 0 after this statement is executed
    Can some one please point out what I am doing wrong.
    Thank you,
    CD
    Edited by: CSD . on Sep 26, 2008 9:53 PM

    >FIND with MATCH OFFSET not working  
    Most unlikely.  More likely is that it isn't doing what you think it should be doing.  Or you're using it incorrectly!
    I can't really follow what your problem is.  I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
    Can you be a little clearer in what the issue is?
    DATA: off2 TYPE i.
    FIND '/' IN 'this string /' MATCH OFFSET off2.
    WRITE: / sy-subrc, off2.
    This little program returns 0 and 12 
    matt

  • Use member on data form does not work

    Hello,
    "Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
    Who is resolve this problem?
    Version hyperion: 11.1.2
    Thanks

    I don't have a solution for you but more steps to solve the problem
    You are ultimately on the right track in some ways but break it down into it's components.
    The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
    So I would strip this baby down to its bare bones then build it back up.
    1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
    Is it successful: go to 2
    If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
    2) Run the calc outside the form but with variables included. Did it prompt you correctly.
    Is it successful: go to 3
    If it isn't. What is wrong with the variable
    3) Now attach it to the form but don't hide the prompts
    Still good go to 4
    4) hide the prompts and run on save
    And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
    This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

  • Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

    Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

    iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
    Computers are not airplay compatible unless you have downloaded an app to make them so.
    User to user forum, so I don't care if you switch to android or any other threats you make.

  • I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    The apps can only be run on an iOS device.   They will not run on your PC.

  • My network is not working i am in ghana and i use MTN  network but it is not working why is it like that

    my network is not working i am in ghana and i use MTN  network but it is not working why is it like that... pls get back to me now

    It sounds as if you need to call your mobile carrier.

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The itunes ogg drop X component not working

    Hi there,
    I installed the itunes ogg drop X component not working from Ogg Drop X 1.0b5 and rebooted.
    I still cant play ogg streams. they play fine in a VLC player so I know they work.
    any body get the Ogg Drop X 1.0b5 itunes component working. How do I get it goin'?
    Cheers

    no response.

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

Maybe you are looking for