Using Scope card with Motion card

Sir,
In my application of Non-Destructive Testing of tubes using Ultrasound, I am using a motion card for controlling the motion of the Ultrasound probe (that runs with stepper motor)using the motion card. This probe moves all over the specimen under test. I am using Scope card to get the data from the probe and display and storing the waveform. Now I am moving the Probe step-by-step manner by specifying the step-increment and acquiring the data. Is it possible to acquire the data if i move the probe in the continuous manner by specifying the speed and end position alone? What are all the things i should take in to consideration to get and store the data efficiently?
Kindly help me regarding this.
Thanks,
Ramkumar. D
Soliton Technologies.

From the standpoint of the Scope card there should be no issues with measuring the data continously. There are several LabVIEW shipping examples that you could take a look at.
Thanks,
Bryan Snarr
Field Engineer
Northern California
National Instruments

Similar Messages

Does Qmaster come with Motion? - Compressor does.

Hi,
I've been using Compressor 2 with Motion 2, works great. I want to set up Qmaster but I can't seem to find the AppleQmasterNode.mpkg package. I saw a bunch of other Qmaster packages, and installed them, but I can't get the control panel to show up in my system prefs, which would confirm I've done the setup correctly.
Advice would be appreciated.
John

That I'm aware of Motion doesn't doesn't come with Qmaster in that sense. However, if you have if you have Final Cut, it will come with Qmaster which you can then set up and compressor will use Qmaster. But if it doesn't show up in your system preferences then it wasn't installed and you would need to purchase Final Cut.

Labview example for data capture using 5102 scope card

How can I program a Labview Vi to control, and capture a waveform using the 5102 scope card. I need to be able to set it up to continually capture a waveform (Channel 1 and Channel 2) when triggered on a rising edge of channel 1 and then store the data on disk automatically, then wait for the next trigger.
Any help or tips as to how I could do it would be helpful.
Thanks
Allan

Allan,
Please find the attached zip file that has some useful LabVIEW examples with scope 5102
Zvezdana S.
National Instruments
Attachments:
scope.zip ‏181 KB

New card that works with motion 2?

I tried to install FCP studio in a Power mac G4(firewire 800) but couldn't install Motion cause the graphic card doesn't support it. I need to know what card can I install in order to use motion 2, any sugestions? I dont need anything expensive just one that works well with motion. My mac now uses a GE Force 4MX 64 mb.

I don't know anyone selling new cards for this system, here's some on eBay.
Check for compatibility with your specific system...
Patrick

How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

Copied from the link provided.
Follow these steps to use your iPhone without a wireless service plan:
Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
Connect the iPhone to iTunes on a computer connected to the Internet.
Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

I restore my iPhone 4S on iTunes and then when restarted it is asking for valid SIM card and I don't have SIM card for that, I was just using the iPhone with wifi, any one can help? Please.

I restore my iPhone 4S on iTunes after the restore was completed the iPhone was restarted and now asking for valid SIM card which I didn't,t have and I was using the iPhone with wifi, and now can't use it because the screen is locked for SIM card. Can anyone help me please.
Thanks,
David

wjosten wrote:
Phil0124 wrote:
I doubt the phone is locked to GCI in any way
Well, you're wrong, & in fact not only is it locked, GCI does not offer unlocking for iPhones.
Fact is your post won't help the OP.
And you are 100% sure its locked to them? How can you know this? While GCI does not offer unlocking that does not mean the phone is actually locked to it. Get off your high horse.
Its possible the original owner had an unlocked phone. he was using with GCI. Or that GCI doesn't actually have locked phones. Seeing as they don't even have their own infrastructure but instead use AT&T's I doubt they'd have iPhones specifically locked to them and that would be the reason they do not offer unlocking (because there's nothing for them to unlock). And just to clarify, I'm not saying for a fact its not locked to them. It very well maybe be, but without knowing more about the phone and going by the fact GCI uses AT&T infrastrucure its possible its not locked. But here's no way to say for sure either way.
Trying a Sim card from AT&T or another carrier might just help the OP if its actually unlocked or locked to AT&T rather than GCI.

How can i get new apple id with out using credit card or visa card

how can i get a new apple id with out using credit card or visa card?

Hi xianlycier06,
If you are looking to create an Apple ID without using a credit card, you may find the following article helpful:
Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Regards,
- Brenden

Using wild card with Captivate 5 ( fill in the blank)

I am training software package that requires many fill in the blanks besides the login screeen. If I were to recording the actions using Captivate 5 record, I think, I can only use a demonstration recording as oppsed to having my students interact with the product by filling in the blank. For example, my product asks for a login. When I login to demonstrate how it should be done, the product reponds correctly. By my student is limited to watching as opposed to interacting. While login is not such a big deal, there are several other areas where the same concept applies. Ideally, I wish to use wild cards in fill in the blank so that any name or information can be used to interact with Captivate and move the slide along. Is this possible, and if so, how?

I think Lilybiri may be misinterpreting your use of the term "wildcards" to mean using them in the programming sense.
Perhaps you are referring to the characters that appear in a typical Password field to hide what the user is actually typing?
If so, the text field object in Captivate has an option to use these password characters so that the user's typing characters are hidden. The characters used are asterisks, which are what some people refer to as wildcard characters.

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card.

I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
Personal info removed to comply with the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store?

Hello guys. I'm on the fence of buying a new Haswell MacBook Pro Retina. I'm a student so i plan to get it with the student's discount. I want to ask you guys whether is it possible to use debit card to purchase anything from apple online store? Im using CIMBclicks debit card. Thank you.

Call the online store and ask them! We are just users like yourself. Besides, you will get a much faster answer directly from the horses mouth and it will be correct!

How to use wild card with variable in powershell

HI
i am trying to use wild card with variable but getting an error message, "You cannot call a method on a null-valued expression."
$src = 'C:\Temp'
$TabletzipPath = $src + "tab*.zip"
i would like to copy the tablet zip file which is placed in in $src to be copied in $TabletzipPath.
i am using tab* because this file name changes continuously. so if i give a fix name for example tablet1.zip than it works fine.

Not sure if the wildcard will work without seeing how you're using the variable.
That said, I can say that it looks like you're missing the backslash between the $src path and the wildcard filename. As-is the above code assigns a value to $TabletzipPath of "C:\temptab*.zip" instead of what you are likely expecting ("C:\temp\tab*.zip")
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

Type '''about:preferences#applications'''<enter> in the address bar.
Now follow the picture.

How can i get apps with out using credit card info because i do not have a card ?

how can i get apps with out using credit card info because i do not have a card ?

Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud.

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Using Scope card with Motion card

Similar Messages

Maybe you are looking for