Using screen from another program?

Can I use a screen created in one module pool program for another report/module pool program?
Is that possible?
Thanks.

Hi nuren,
U can do it this way.
Create a Transaction for for program P1.
In SE80 - Maintain Transaction (say zprog1)
Here u have to pass program name(p1) and screen No. (103)
and use CALL TRANSACTION in PAI of p2 to call it.
CALL TRANSACTION zprog1. "as created above
If u want the execution to completely on p1- 103
use
LEAVE TO TRANSACTION zprog1. "as created above
Hope this will help.
Reward if helpful.
Regards
Sachin Dhingra

Similar Messages

  • Set the parameter in the selection screen of a program from another program

    Hi ALL,
    I need to call the program RHALESMD from another program and the program RHALESMD takes from date as one of the input parameter.how do i set the from date from the calling program and call RHALESMD
    Thanks
    Bala Duvvuri

    i got the answer
    Program accessed
    REPORT report1.
    DATA text TYPE c LENGTH 10.
    SELECTION-SCREEN BEGIN OF SCREEN 1100.
      SELECT-OPTIONS: selcrit1 FOR text,
                      selcrit2 FOR text.
    SELECTION-SCREEN END OF SCREEN 1100.
    Calling program
    REPORT report2.
    DATA: text       TYPE c LENGTH 10,
          rspar_tab  TYPE TABLE OF rsparams,
          rspar_line LIKE LINE OF rspar_tab,
          range_tab  LIKE RANGE OF text,
          range_line LIKE LINE OF range_tab.
    rspar_line-selname = 'SELCRIT1'.
    rspar_line-kind    = 'S'.
    rspar_line-sign    = 'I'.
    rspar_line-option  = 'EQ'.
    rspar_line-low     = 'ABAP'.
    APPEND rspar_line TO rspar_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'H'.
    APPEND range_line TO range_tab.
    range_line-sign   = 'E'.
    range_line-option = 'EQ'.
    range_line-low    = 'K'.
    APPEND range_line TO range_tab.
    SUBMIT report1 USING SELECTION-SCREEN '1100'
                   WITH SELECTION-TABLE rspar_tab
                   WITH selcrit2 BETWEEN 'H' AND 'K'
                   WITH selcrit2 IN range_tab
                   AND RETURN.
    Thanks
    Bala Duvvuri

  • How to call  Screen in another program from exsisting program

    Hello Frieds,
    Can any one help me how to call  a screen  in another program (Say "test2") from exsisting program(say "test1')
    If above case is possible then how to access the fields in the target screen?
    Your responce is greatly appreciated.
    Best Regards,
    Rakesh

    Hi Rakesh,
    If you wish to use ONLY the screen of another program, call transaction  will not help you, because the called transaction will be fully executed (and not only the screen), and the acess to screen field wil be difficult.
    When you wish to access the same screen from more than one program, you can create this screen in a function module and in this way you can call the function (to display the screen) in many programs.
    Best regards,
    Leandro Mengue

  • Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc.

    Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc. & another A, B, C. They don't mesh & can't get rid of either. All info there, but can't change width of columns.

    I think my problem is that I have inadvertently created three tables (I only want one). I have included a screen shot of the light grey line under B and the words Table 1 behind it.

  • IPad revers back to a home screen from another page being used, IE Facebook    Good battery and wifi signal

    iPad revers back to a home screen from another page being used, IE Facebook    Good battery and wifi signal.   Sometimes several times in a couple of minutes. Could there be an problem with internal hardware

    Hi there
    My wife and I have been dealing with a very similar issue with our iPhone 5ss, all battery drain issues started after the upgrade to ios 7.03. We have performed numerous restores and have had 3 trips to the Genius Bar.  Finally they gave us new iPhones (yesterday).  We had hoped this would do the trick but we have the same problem on the new phones.
    This morning I restored one and didn't sign into iCloud.  Battery drain is now gone.  And when I deleted iCloud from my wife's phone it too went back to normal.  So I believe the culprit is iCloud and I am now testing various setups with iCloud to determine which app/setting is causing the problem. 
    Hope this helps with your phones.  I will post again if I can narrow it down to something specific.
    Good luck!

  • How to call an alv report from another program and return back

         Hello ,
    I am calling one abap program (Prgm B) from another program (Prgrm A).
    Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
    Now, I am using below code in Prgrm A,
      SUBMIT Prgrm B VIA SELECTION-SCREEN
                          WITH SELECTION-TABLE rspar
                          EXPORTING LIST TO MEMORY
                          AND RETURN.
    When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
    I want to get back to Prgrm A by fetching some data from Prgrm B.
    Please let me know, if i am missing something.
    Regards,
    Seema

    Hi Seema,
    Refer below code.
    DATA: v_matnr LIKE mara-matnr.
    DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
    DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_ascilist OCCURS 0,
             line(200).
    DATA: END OF t_ascilist.
    data var(3) type c.
    SELECT-OPTIONS: s_matnr FOR v_matnr.
    var = '  3'.
    START-OF-SELECTION.
       SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
       AND RETURN.
       CALL FUNCTION 'LIST_FROM_MEMORY'
            TABLES
                 listobject = t_listobject
            EXCEPTIONS
                 not_found  = 1
                 OTHERS     = 2.
       IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ELSE.
         CALL FUNCTION 'LIST_TO_ASCI'
    *     EXPORTING
    *       LIST_INDEX               = -1
    *       WITH_LINE_BREAK          = ' '
           TABLES
             listasci                 = t_ascilist
             listobject               = t_listobject
           EXCEPTIONS
             empty_list               = 1
             list_index_invalid       = 2
             OTHERS                   = 3.
         IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
         ELSE.
           WRITE:/ 'Below are the lines from the submitted program.'.
           LOOP AT t_ascilist.
             WRITE:/ t_ascilist-line.
           ENDLOOP.
           SKIP 2.
         ENDIF.
       ENDIF.
       IMPORT t_mara FROM MEMORY ID 'T_MARA'.
       WRITE:/
    'Here is the output from the table exported from the submitted program.'
       LOOP AT t_mara.
         WRITE:/ t_mara-matnr.
       ENDLOOP.
    Submitted program
    REPORT  ZTESTAKS1.
    DATA: v_matnr LIKE mara-matnr,
           v_maktx LIKE makt-maktx.
    DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF t_makt OCCURS 0,
             matnr LIKE makt-matnr.
    DATA: END OF t_makt.
    SELECT-OPTIONS: s_matnr FOR v_matnr,
                     s_maktx FOR v_maktx.
    START-OF-SELECTION.
       SELECT matnr INTO TABLE t_makt
                    FROM makt
                   WHERE matnr IN s_matnr
                     AND maktx IN s_maktx.
    if not t_makt[] is initial.
       SELECT * FROM mara
                INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
               WHERE matnr = t_makt-matnr.
    endif.
       EXPORT t_mara TO MEMORY ID 'T_MARA'.
       WRITE:/ 'This list is from the submitted program'.
       SKIP 1.
       LOOP AT t_mara.
         WRITE:/ t_mara-mtart.
       ENDLOOP.
    Hopes this helps you.
    Thanks,
    Ashok.

  • Problem regarding calling a program from another program

    Hi,
    I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
    a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
    Regards,
    saumik

    Submitting a report using ranges for select-options
    * Define range for ltak-tanum
    RANGES: r_tanum FOR ltak-tanum.                                                                               
    * Read values from database tabel into the range
    * These values are later used for select-options in the report
    SELECT * FROM ltak                                                   
      WHERE lgnum =  w_lgnum AND           "Warehouse number/complex    
            vbeln = w_screen1000-io_vbeln.       "Transfer order number
      MOVE ltak-tanum TO r_tanum-low.                                    
      MOVE 'I' TO r_tanum-sign.                                          
      MOVE 'EQ' TO r_tanum-option.                                       
      APPEND r_tanum.                                                    
    ENDSELECT.                                                                               
    * Submit report with range                  
    SUBMIT zmm00100 WITH p_tanum IN r_tanum.   
    or
    Submitting a report from ABAP with selection criterias
      TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
      DATA: l_iblnr        TYPE st_iblnr,
    *     Define internal table and work area for select-options
            l_selection    TYPE rsparams,
            li_selection   TYPE tt_selection.
    * Create selectIon table
      LOOP AT gi_iblnr INTO l_iblnr.
        CLEAR l_selection.
        l_selection-selname  = 'IM_IBLNR'.    "Option name
        l_selection-kind     = 'S'.           "S= select options P=Parameters
        l_selection-sign     = 'I'.           "Sign
        l_selection-option   = 'EQ'.          "Option
        l_selection-low      = l_iblnr-iblnr. "Value
        APPEND l_selection TO li_selection.
      ENDLOOP.
    * Submit report
      SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
    Regards,
    Prabhudas

  • Calling selection screen from another selecton screen.

    Hi guys,
    I want to call default selection screen of one program from default selection screen of another program.
    Is that possible . would appreciate some helpful answers.
    Thanks,
    Venkat.

    it is possiable.
    1.submit
    2. call transcation t_code.
    Syntax
    SUBMIT <prog>.
    For more information about the SUBMIT statement, see Calling Executable Programs (Reports)
    Assume the following simple report:
    REPORT ZDYN3.
    WRITE / 'Dynamic Program!'.
    The following executable program (report) starts, modifies, and restarts ZDYN3:
    REPORT ZMASTER1.
    DATA CODE(72) OCCURS 10.
    DATA LIN TYPE I.
    READ REPORT 'ZDYN3' INTO CODE.
    SUBMIT ZDYN3 AND RETURN.
    DESCRIBE TABLE CODE LINES LIN.
    MODIFY CODE INDEX LIN FROM
    'WRITE / ''Dynamic Program Changed!''.'.
    INSERT REPORT 'ZDYN3' FROM CODE.
    SUBMIT ZDYN3.
    The output of this program is displayed on two subsequent output screens. The first screen displays:
    Dynamic Program!
    The second screen displays:
    Dynamic Program Changed !
    When you use the SUBMIT statement, all modifications made to a program during runtime take immediate effect before they are submitted. In the above example, ZDYN3 is submitted from ZMASTER1 first in its original and then in its modified form, generating different results.
    This is not the case if you change the codes of include programs or subroutines dynamically.
    Assume the following include program:
    INCLUDE ZINCLUD1.
    WRITE / 'Original INCLUDE program!'.
    and an executable program (report) for modifying and including it:
    REPORT ZMASTER2.
    DATA CODE(72) OCCURS 10.
    DATA LIN TYPE I.
    READ REPORT 'ZINCLUD1' INTO CODE.
    DESCRIBE TABLE CODE LINES LIN.
    MODIFY CODE INDEX LIN FROM
                'WRITE / ''Changed INCLUDE program!''.'.
    INSERT REPORT 'ZINCLUD1' FROM CODE.
    INCLUDE ZINCLUD1.
    If you run ZMASTER2, the source code of include program ZINCLUD1 is changed and replaced in the system. However, the last line of ZMASTER2 executes the older version since the runtime object of ZMASTER2 is generated before ZINCLUD1 is modified. Only when ZMASTER2 is run a second time, does the system determine that ZINCLUD1 has been changed. Exactly the same is true if you dynamically modify the source code of a subroutine and call it from within the same program.
    One way to solve this problem is to use the INCLUDE statement within an external subroutine that is called by the program. This allows you to create or modify include programs or subroutines and use the updated versions directly in the same program.
    Assume the following include program:
    INCLUDE ZINCLUD1.
    WRITE / 'Original INCLUDE program!'.
    and an external subroutine:
    PROGRAM ZFORM1.
    FORM SUB1.
         INCLUDE ZINCLUD1.
    ENDFORM.
    The following program reads the include program, modifies it, enters it back into the system, and calls the subroutine.
    REPORT ZMASTER3.
    DATA CODE(72) OCCURS 10.
    READ REPORT 'ZINCLUD1' INTO CODE.
    APPEND 'WRITE / ''Extension of INCLUDE program!''.' TO CODE.
    INSERT REPORT 'ZINCLUD1' FROM CODE.
    PERFORM SUB1(ZFORM1).
    This produces the following output:
    Original INCLUDE program!
    Extension of INCLUDE program!
    In this case, the updated version of the include program is used in the subroutine because its time stamp is checked when the subroutine is called, and not when the calling program is generated.

  • Probe in calling  tabstriped screen from another screen ..

    hi
    could any one please  help me ,,,that what is the logic for calling tabstriped screen from another screen ..
    Thanks N Regards
    Priya

    Hi,
    Jonathan.
    Thanks for the response ...
    I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the  program its working fine ,but the same programe when I  execute with the  T.CODE ...its giving erorr ...
    ERORR:Program " ZTEST "tried to  use screen 000.
            the screen doesn't exist.
    HERE IS CODE.
    let me know where is the mistake ..
    could you please , help me ,,what i suppose to do .
    let me know where is the mistake ..
    REPORT ZTEST .
    DATA: DATE LIKE SY-DATUM,
           TIME LIKE sy-uzeit.
    DATA  number TYPE sy-dynnr.
    CONTROLS tabstrip TYPE TABSTRIP.
    tabstrip-activetab = 'TAB1'.
    number = '1003'.
    tabstrip-activetab = 'TAB2'.
    number = '1004'.
    CALL SCREEN 1000.
    *&      Module  STATUS_1000  OUTPUT
          text
    MODULE STATUS_1000 OUTPUT.
      CASE : SY-UCOMM.
        WHEN 'ENTER'.
          LOOP AT SCREEN.
            IF SCREEN-GROUP1 = 'MOD'.
              DATE = DATE.
              TIME = time.
              SCREEN-INPUT = '0'.
            ENDIF.
            MODIFY SCREEN.
          ENDLOOP.
      ENDCASE.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    ENDMODULE.                 " STATUS_1000  OUTPUT
    *&      Module  USER_COMMAND_1000  INPUT
          text
    MODULE USER_COMMAND_1000 INPUT.
      CASE SY-UCOMM.
        WHEN 'ENTER'.
          LEAVE TO SCREEN 1001.
      endcase.
    ENDMODULE.                 " USER_COMMAND_1000  INPUT
    *&      Module  USER_COMMAND_1001  INPUT
          text
    MODULE USER_COMMAND_1001 INPUT.
      CASE SY-UCOMM.
            WHEN 'button1'.
            CALL SCREEN 1002.
        ENDCASE.
        ENDMODULE.                 " USER_COMMAND_1001  INPUT
    *&      Module  USER_COMMAND_1002  INPUT
          text
    MODULE USER_COMMAND_1002 INPUT.
        CASE sy-ucomm.
          WHEN 'TAB1'.
            number = '1003'.
          WHEN 'TAB2'.
            number = '1004'.
        ENDCASE.
        ENDIF.
    ENDMODULE.                 " USER_COMMAND_1002  INPUT
    *&      Module  STATUS_1002  OUTPUT
          text
    MODULE STATUS_1002 OUTPUT.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    ENDMODULE.                 " STATUS_1002  OUTPUT
    Thanks N Regards.
    Priya.

  • How to create a variant to a report from another program at run time

    Hi experts,
                   when i am using FM  :  /OSP/REPORT_CREATE_VARIANT to create a report variant from a program then i am getting  an error 'For object /OSP/ERPNR , number range interval 01 does not exist ', how should i avoid it or can any one help me out to create a report variant from another program at run time with the results of the program.so that i can execute the report from here with this variant

    If i understand you,
    - You can use a FM like [RS_CREATE_VARIANT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=rs_create_variant+&adv=false&sortby=cm_rnd_rankvalue] to create a variant and then use it in the [SUBMIT|http://help.sap.com/erp2005_ehp_03/helpdata/EN/fa/096d67543b11d1898e0000e8322d00/frameset.htm] statement USING SELECTION-SET.
    - But you may also use SUBMIT with WITH parameters which doesnt require variant creation and with much less programming efforts.
    - You can mix the two solutions also.
    So what is you actual requirement, also look at some documentation like [ Scheduling a Job: Full-Control Method|http://help.sap.com/erp2005_ehp_03/helpdata/EN/fa/096ce5543b11d1898e0000e8322d00/frameset.htm]
    Regards

  • Call a screen in another program

    Hi
    I have a program PRG1 that has screen 1000.
    I want to load this screen from the program PRG2.
    thanks
    Murugesh

    yes , do now like below. it will surely work. it worked for me.
    DATA: bdcdata_wa TYPE bdcdata,
    bdcdata_tab TYPE TABLE OF bdcdata.
    CLEAR bdcdata_wa.
    bdcdata_wa-program = 'PRG1'.
    bdcdata_wa-dynpro = '1000'.
    bdcdata_wa-dynbegin = 'X'.
    APPEND bdcdata_wa TO bdcdata_tab.
    CALL TRANSACTION <TCODE> USING BDCDATA_TAB.

  • How to connect iseries green screen from java program

    how to connect iseries green screen from java program to get the data in the DB files ,here the DB is DB2/400

    Just some Friday fun. Use the telnet program that comes with Windows and supports VT escape sequences.
    import java.io.*;
    import java.net.*;
    public class AutoTelnet {
         private static Socket s;
         public static void main(String[] args) throws Exception {
              Thread t = new Thread() {
                   @Override public void run() {
                        try {
                             s = new ServerSocket(5555).accept();
                        } catch (IOException ex) {
                             ex.printStackTrace();
              t.start();
              Process p = new ProcessBuilder("cmd", "/C", "start", "telnet", "127.0.0.1", "5555").redirectErrorStream(true).start();
              t.join();
              PrintStream ps = new PrintStream(s.getOutputStream());
              ps.println("Screen will be cleared in 5 seconds");
              ps.println("5");
              Thread.sleep(1000);
              ps.println("4");
              Thread.sleep(1000);
              ps.println("3");
              Thread.sleep(1000);
              ps.println("2");
              Thread.sleep(1000);
              ps.println("1");
              Thread.sleep(1000);
              ps.println("\u001b[2J");
              Thread.sleep(5000);
    }

  • CALL TRANSACTION 'ME33K  from another program

    Hi,
    I ma trying to CALL TRANSACTION 'ME33K  from another program, but it is not working.  The transactions is opening, but it is not opening with the contract number (ls_ekpo-ebeln) i am passing.
    ls_ekpo-ebeln does have a valued when CALL TRANSACTION 'ME33K  is called.
    In debug, I noticed the "value" is blank when step into CALL TRANSACTION 'ME33K .
       WHEN 'EBELN'.  "Contract
          l_field = 'EVRTN'.
         IF ls_ekpo-ebeln <> ''.
            GET PARAMETER ID 'VRT' FIELD l_field.  "EVRTN.
           SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
           CALL TRANSACTION 'ME33K AND SKIP FIRST SCREEN.
            SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
          ENDIF.
    Any help or suggestions would be great.
    Thanks,
    Naing

    Dear Naing,
    I execute the same code
    IF ls_ekpo IS INITIAL.
    GET PARAMETER ID 'VRT' FIELD LS_EKPO.
    SET PARAMETER ID 'VRT' FIELD ls_ekpo.
    CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
    SET PARAMETER ID 'VRT' FIELD ls_ekpo.
    ENDIF.
    And it is working.
    Try to do de simple sintax.
    A program with one pararmeter to introduce the contract number.
    The set parameter for this parameter and the call transaction.
    I´m waiting your comments.
    Regards.
    Antonio.

  • Checking whether field-symbol from another program is assigned?

    Hi all
    I'm attempting to access a FS from another program.
    As the FS can be assigned, or unassigned within that program, how do I checked for that in my calling program?
    e.g. calling program;
    FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE.
    DATA: lv_var(40) type c.
    lv_var = '(ZTGT_PROG)<read_fs>'.
    ASSIGN (lv_var) TO <fs>.   " statement might dump...

    Hi
    Go through this doc and use accordingly
    Field Symbols
    Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
    All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
    You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
    Field symbols provide greater flexibility when you address data objects:
    If you want to process sections of fields, you can specify the offset and length of the field dynamically.
    You can assign one field symbol to another, which allows you to address parts of fields.
    Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
    You can also force a field symbol to take different technical attributes from those of the field assigned to it.
    The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
    While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
    For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
    check the below links u will get the answers for your questions
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
    http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
    Syntax Diagram
    FIELD-SYMBOLS
    Basic form
    FIELD-SYMBOLS <fs>.
    Extras:
    1. ... TYPE type
    2. ... TYPE REF TO cif
    3. ... TYPE REF TO DATA
    4. ... TYPE LINE OF type
    5. ... LIKE s
    6. ... LIKE LINE OF s
    7. ... TYPE tabkind
    8. ... STRUCTURE s DEFAULT wa
    The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
    Effect
    This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
    You can only use one of the additions.
    Example
    Output aircraft type from the table SFLIGHT using a field symbol:
    FIELD-SYMBOLS <PT> TYPE ANY.
    DATA SFLIGHT_WA TYPE SFLIGHT.
    ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
    WRITE <PT>.
    Addition 1
    ... TYPE type
    Addition 2
    ... TYPE REF TO cif
    Addition 3
    ... TYPE REF TO DATA
    Addition 4
    ... TYPE LINE OF type
    Addition 5
    ... LIKE s
    Addition 6
    ... LIKE LINE OF s
    Addition 7
    ... TYPE tabkind
    Effect
    You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
    This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
    In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
    Effect
    Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
    The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
    Example
    Address components of the flight bookings table SBOOK using a field symbol:
    DATA SBOOK_WA LIKE SBOOK.
    FIELD-SYMBOLS <SB> STRUCTURE SBOOK
    DEFAULT SBOOK_WA.
    WRITE: <SB>-BOOKID, <SB>-FLDATE.
    Related
    ASSIGN, DATA
    Additional help
    Declaring Field Symbols
    Reward points if useful
    Regards
    Anji

  • How to import photos from another program on computer eg. Adobe Photoshop

    Can photos be imported to IPhotos from another program on the same computer eg. Adobe Photoshop?

    Photos aren't "in" Photoshop. They're in the Finder and has just been set to use Photoshop to open them.
    You can import files into iPhoto by
    The File -> Add to Libary command
    Drag and Drop to either the iPhoto window or the iPhoto icon.

Maybe you are looking for