Using SCXI Chassis 1001, system will not recognize 1162, 1163 or 1102 modules.

I'm using an SCXI system with a 1001 chassis, labview 6.0 and MIO-16E card. However, the system will only recognize my 1102B and two of my four 1124 modules. It will not recognize the other 1124 modules or the 1164, 1163 and 1102 modules, and I don't know why.

Hey Justin, thank you for responding to my message. As it turns out, the working modules can be detected in any of the 12 slots of the 1001 chassis. However, the 1164, 1163, and 1102 modules will not work in any of the slots. I've tried switching out components and using a different chassis, adapter, pc, and DAQ device, systematically changing out one component at a time, but I still get the same results. I've also tried updating the driver to the latest version available. The only conclusion that makes sense is that the 1102 modules are bad. I'm going to try ordering a new 1102 and see if it will work. If not, then I know it's not the cards and maybe I can return the new module.
But what still bothers me is that I was able to get a new 1124 module to work by placing it next to a 1102B module that is connected to the DAQ device . The new 1124 module will not work if it is directly connected to the DAQ device itself. What's even stranger is that my older 1124 modules WILL work if directly connected to the DAQ device. I was wondering if NI has modified the 1124 in such a way that thier new ones can only operate in conjunction with other modules.
Thank you,
Nick

Similar Messages

I am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

i am trying to install my adobe acrobat XI Pro, but after i go thru the installation process, i get a message saying my free trial has ended, the system will not recognize my new product.

Moved to Acrobat Installation & Update Issues

New mac mini system will not recognize wireless keyboard and trackpad.

My brand new mac mini system will not initialize properly. The return on the track pad are not being recognized, although scrolling is. Any others find this? Support could not figure this out on the phone. They sent me out to get new batteries and now they are closed. Batteries have been changed and still nothing.

My Mac MINI gave me one heck of a time trying to get it to recognize my Bluetooth mouse and keyboard. both Apple brand.
I finally had to connect an old USB mouse and keyboard to get the silly thing to connect.
Don't forget to repair permissions.
I also had to shut the computer down and start it back up a couple of times before it would connect. I think it has to do with the new Bluetooth 4.0 wireless technology.
I also turned off my Bluetooth devices and turned them on again, then I pulled the batteries out a couple of times and tried again and again.
I also put in new battries even thiough the ones I replaced were about a week old.
Finally, the MINI recognised the mouse and keyboard.
I wish I could tell you which thing did the trick.

System will not recognize purchased fonts

I recently updated my macintosh to OS 10.4.4 from OS 9.4 and now cannot use three sets of fonts that we purchased from adobe.com or had custom-made. I had no issue using them in OS 9, and plan to use them in Illustrator, which runs in Classic anyways. Any insight as to why the system won't recognize the fonts, even in Classic? I have the fonts in the OS 9 system folder. Thanks.

Lynmarie,
You've posted your question in the PowerBook G4 DVD discussion group, and the people who might be able to answer your question may not be reading here. If you haven't already, you might want to pose the question in an OS X or OS 9 discussion group. The main index is located at http://discussions.apple.com/index.jspa?categoryID=1

Purchased Lightroom 5 (Student/Teacher version) - got my Redemption Code and Serial Number but when I use codes provided the system will not finish loading. Have PC running Windows 7. What is wrong?

Help . . . Have the Redemption code and Serial Number as supplied on-line but can not install system using these numbers.

Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Hello All: ) I have video of a child who is very sick on my black berry and I want to get burn to a disk for his mom yet when I try to use my Dell laptop it will not recognize it PLEASE help any one before his time is to late :.(

Please its very important I get his family this Video from my Crackberry phone to a computer disk. I am trying to use Windows DVD Maker with DVD+r disks. Video is of his best friend trying to come to grip with his up coming voyage back to our father's Home (( to politely say it.
To God be the Glory, for through him all things become possible!

Hy and welcome to the forum
Now where is that video stored means on memory card. If yes then there are two ways to get this to your PC
1.    Plug out the memoy card from the BB and use a card reader to read the contents of the Card
2.    Use desktop manager. Means install the Desktop Mananger. Plug your BB to the PC using cable. Wait for the pc to finish installation. Now Say yes for mas storage. And open the driver mounted to the PC (Go to My Computer to see that drive) and copy th video.
Now to burn it on the DVD. This can be done using various ways
I recomend this time only two softwares fo you
1.   Windows Movie Maker
2.   Nero
The first one is the builtin software for windows and the second one is very excellent. Because it has many features. I use 9 or later fo these tricks. You must have a DVD writer drive installed on your PC and have a DVD disk either recordale or rewritable.
Need any help please let me know

I have windows 7 and using windows live the system will not link thru - comes up with comment application not found HELP please

previous version was fine but since downloading v4 have been unable to link thru from any emails received.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Vista will not recognize my iPod

I have an iPod video and my Vista system will not recognize it. I downloaded and installed iTunes 7.5XX, but I still can not get it to recognize the iPod. Any help would be greatly appreciated.

I think I had the same problem as you guys, Vista wouldn't recognize my ipod but it was seen in device manager as a mass storage device. What happen to me was vista ask me if I wanted to format my ipod so it would work with vista like a dummie I said yes and from that time on it was not seen in my computer and in itunes. I ended up putting it on a new computer, when I installed itunes I plug in my ipod and this time itunes seen it and told me it was corruped, I was able to backup the music and videos I had on it to the new computer then I did a restore on the ipod and now all work good.
Message was edited by: csmi
Message was edited by: csmi

I movie will not recognize .mpg files

I have recently transferred all my PC videos to my I Mac. I am trying to make movies using I Movie but it will not recognize these files. Any thoughts?

.MPG files are containers to various encoding formats, some of which are not supported by iMovie. Just because the files are playable in QuickTime, does not mean the files are editable in iMovie.

System Profiler will not recognize installed hard drive if drive is in use by VMWare

System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
    Lion Client:
      Available: 217.84 GB (217,836,306,432 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
    BOOTCAMP:
      Available: 255.58 GB (255,575,560,192 bytes)
      Capacity: 319.79 GB (319,790,510,080 bytes)
      Mount Point: /Volumes/BOOTCAMP
      File System: NTFS
      Writable: No
      Ignore Ownership: Yes
      BSD Name: disk1s2
      Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
    Lion Client:
      Available: 213.39 GB (213,392,244,736 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

HT4061 I bought my mom an iPad for Christmas this year. We can't use it as it will not recognize her passwords. How do I reset it without using passwords. I want this thing wiped clean, just like it came from the store so that I might start over.

I bought my mom an iPad for Christmas this year. We can't use it as it will not recognize her passwords. How do I reset it without using passwords. I want this thing wiped clean, just like it came from the store so that I might start over. This is very frustrating!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
 Cheers, Tom

DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?

Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry

HT1925 I am using windows XP and have iTunes version 11.0.5.5. My iPhone 5 with current operating system will not link with my iTunes. It states I needed the newer version of iTunes. But I have been unable to update --automatic or manual. How do I update

I am using an older windows computer with Windows XP and iTunes 11.0.5.5. Since upgrading my iPhone and iPad my system will not allow me to connect the devices to my iTunes -- it notes I need to upgrade to iTunes 11.5. However using automatic updates or manual update I can not update iTunes -- I get an error message the older windows iTunes could not be removed. I can not remove iTunes using control panel -- an older install/uninstall file is evidently missing. All of my music is contained on my PC -- more music is on my PC than I store on my other devices and I don't want to loose those music files nor permission to access those music files. Does anyone have a solution to uninstalling and upgrading windows iTunes without losing my music. I would like to be able to connect my iPhone and iPad to my PC again. RS

I am haveing same problem canot find itunes.msi

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any t

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.

I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

Have a new computer. iTunes will not recognize my iPod Nano only my iPod Touch. The Nano was used on the old computer.

My new computer will not recognize my iPod Nano. The Nano was used on the old computer. I also have an iPod Touch and this is recognized.

Hello victoriafromurbana,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPod nano is not recognized on your computer, please follow the appropriate troubleshooting steps in the article below for your type of computer.
iPod not appearing in iTunes - Apple Support
Take care,
Alex H.

Using SCXI Chassis 1001, system will not recognize 1162, 1163 or 1102 modules.

Similar Messages

Maybe you are looking for