Using sdcard as home, moves from sdb1 when a usb drive is hotplugged

I have an asus eee pc. I use an sd card as /home which udev puts as sdb.
The problem I have is when I insert usb media, the usb becomes sdb and my sdcard moves onto sdc. You can guess the rest of the problem.
I am guessing I need a udev rule to stop this behaviour. I have spent the last hour googling and searching the forums (including the 47 page eee pc forum, can't believe no one has come across this)
Thanks

I think udev is working as it was designed to, after all the sd card is removeable media, not a fixed drive. So I am the one being stupid, lol, using it as if it was a fixed drive.
dmesg goes a bit loopy, with loads of usb errors etc and I lose my home, see below.
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: unable to read config index 0 descriptor/all
usb 1-2: can't read configurations, error -71
usb 1-2: new high speed USB device using ehci_hcd and address 5
usb 1-2: device descriptor read/64, error -71
usb 1-2: device descriptor read/64, error -71
usb 1-2: new high speed USB device using ehci_hcd and address 6
usb 1-2: device descriptor read/all, error -71
usb 1-2: new high speed USB device using ehci_hcd and address 7
usb 1-2: unable to read config index 1 descriptor/all
usb 1-2: can't read configurations, error -71
hub 1-0:1.0: unable to enumerate USB device on port 2
usb 1-2: new high speed USB device using ehci_hcd and address 8
usb 1-5: reset high speed USB device using ehci_hcd and address 2
usb 1-5: device descriptor read/64, error -71
usb 1-5: device descriptor read/64, error -71
usb 1-5: reset high speed USB device using ehci_hcd and address 2
usb 1-5: device descriptor read/64, error -71
usb 1-5: device descriptor read/64, error -71
usb 1-5: reset high speed USB device using ehci_hcd and address 2
usb 1-5: device not accepting address 2, error -71
usb 1-5: reset high speed USB device using ehci_hcd and address 2
usb 1-5: device not accepting address 2, error -71
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
Buffer I/O error on device sdb, logical block 0
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] READ CAPACITY failed
sd 2:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
sd 2:0:0:0: [sdb] Sense not available.
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through

Similar Messages

Need to transfer home movies from iPhone to external hard drive.

Need to transfer home movies from iPhone to external hard drive. The movies were created with Flip Video, not iPhone. I can see and watch them via iTunes but have not figured out how to move them from iPhone to hard drive. iPhone is broken (screen) and locked, but is still connecting to iTunes. I have backed up all photos/videos created with the iPhone, just need to figure out how to get these last videos off the phone. They are very important. I am working off a Windows XP machine. No, the camera wizard will not work for this as these videos are not stored in that area of the phone.
Thanks,
E

This is what I have done so far and stuck again.
I opened Image capture plugged in IPhone. Device brought up camera roll pics only.
I was able to send them to the external hard drive. Now they have green checks marks. I cannot seem to remove them. Don't want to delete them yet to put into folder for having prints made..
Devices showed IPhone but would only show camera roll I have two other folders and cannot seem to go to them to show up on the device one is Photo library has 300+ pics and
last import folder. I would like to take the 300 also from the Photo library and also copy them or move them to the external hard drive.
What step am i missing , please help.
thank you
jz

Home movies from DVD to Mac hard drive

I am an absolute neophyte at playing with video files. I have some VHS camcorder home movies from when my kids were little. A few months ago I asked the local photo shop to copy the videotapes onto DVDs. Now I'd like to save those videos as computer files on my mac, both to preserve them and (some day) edit them. I can't seem to figure out how to do this and any advice would be most welcome.
A week or so ago I tried Handbrake and it only copied a few seconds of video with audio that didn't match. Their support forum had something about using DVDtoOne but I couldn't understand what that was supposed to do so I didn't try it.
Yesterday I downloaded a trial copy of DVDxDV and asked it to make a file compatible with NTCS, Quicktime and iMovie. It seems that it worked wonderfully. However, the file it created from a two hour DVD is more than 25GB! I can't reasonably keep files that huge on my hard drive.
Is there a way to compress the file so that it is more like the size of the original DVD and still preserve the quality? (Maybe Quicktime Pro?)
Or, is there a better way to proceed so that I can preserve/edit these DVD files?
Thanks,
Perry

Moreover, you could try Handbrake.
Handbrake is a software that converts DVD to any format you specify, and it does rely on the popular ffmpeg Unix program. (In fact, I bet most conversion software do rely on ffmpeg...).
I garantee Handbrake is not another of those programs, commonly called thing like DVD2iPod (I don't mean to harm this software if it does really exist) or DVDRIPMAGIX, or well... you know.
So, in Handbrake, there's a list of presets from which you can choose to convert the video to. You should perhaps leave it to Normal (which will encode it to a .mp4 movie, thus rendering you with a far lesser file than 25GB).
Of course, the 25GB you were prompted is an uncompressed file, like DV format is. It is used for editing from uncompressed source, but you are coming from a DVD, which is in the base, not an uncompressed source as far as I know. Thus explaining why the movie on the DVD is not 25GB.
I hope all this will be useful to you!

HT201317 My husband bought an Ipad 3. He gave me his Ipad 2. How do we get home movies from the 2 to the 3? I want to restore the 2 to the factory settings, but not lose these movies.

My husband bought an Ipad 3. He gave me his Ipad 2. How do we get the home movies from the 2 to the 3? I would like to restore the 2 to factory settings. As I understand, from reading "help", videos are NOT in the Photo Stream.

1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
Even organize your photos in albums — right on your device
2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

Is there a way to separate home movies from the movies category?

I want to put home movies on my Apple TV but don't want them to show up along with movies. Is there a way to separate them? I haven't tried it yet so maybe they are separated but I foresee not being possible right now.
For the moment, I've been streaming my home movies from .mac

As Chenks says... just create a genre for them.... just RT-Click on the home movies (can actually multi-select all of then and do them all at once) and change the genre to "home" or whatever you'd like and then when you go to AppleTV go to Genres > "Home" and they will all appear together there.

Itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?

ive recently updated, itunes and all my movies have disappeared,i can no longer add to library from my external hdd which ive always used and can only add from the laptops own hard drive,any ideas what the issue could be?if i transfer the movies from the external to the laptop they will add to the library without any problem so theres no issue with the laptop but when i go to add file in itunes i can path to the external but as soon as i select the file nothing happens, just goes back to itunes

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

I transferred home movies from VHS to DVD. How do I import the data into imovie.

I transferred home movies from VHS to DVD. I can open the data using the DVD Player but I cannot import data into imovie. Any ideas?

Another option is to download the free app MPEG Streamclip from Squared 5 here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
After loading the DVD on your Mac, drag the icon onto Streamclip's window. From the menu choose File>Export to QuickTime then for Compression select the Apple Intermediate Codec (AIC). Adjust the quality slider from 50% to about 75% - that should give good quality at a reasonable file size. Leave other settings as they are and click on Make Movie. From the next box, choose a name for the file (it will be a .mov file) and a save location (say Desktop).
The saved .mov file can now be imported to an Event and edited if desired in iMovie.
Note that you may be asked to instal a file from Apple. It's named QuickTime MPEG-2 Playback Component for Mac OS X. It's priced at US$19.99 and is available from the US Apple Store here:
http://store.apple.com/us/product/D2187Z/A?
John
Message was edited by: John Cogdell

My Apple TV 2 won't accept home movies from iTunes

My Apple TV 2 won't accept certain home movies from iTunes but my Apple TV 3rd generation will. Some of my older home movies play on both units. Whats different about my new movies?

Winston,
I've been having connection problems with my ATV2 for quite some time. Internet connections are fine, regardless of whether wired or via Ethernet, but it simply won't connect to my iTunes library (spinning wheel for ever). What "irks" me here is your comment below:
I'm a little concerned by the Apple TV not being seen in iTunes when you try to restore by micro USB, this is pretty much a last resort repair.
Is the ATV2 supposed to show up in iTunes and if so, how/where? It sure doesn't show up in my iTunes! I seem to be able to connect, as when I try to close iTunes after one of my many attempts to stream a movie I close iTunes it complaines that there's one or more ATVs connected.
@Peter: please do respond here as to whether a replacement ATV2 has solved your problems ... don't really want to shell out more money for it, but if it solves the problems...

I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?

You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to

I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to screen?

Those choices are controlled via System Preferences, Trackpad.

Can no longer access home movies from imovie theater on atv. Keep seeing the circle while waiting.

Can no longer access home movies from imovie theater on atv. Keep seeing the circle while waiting.

This indicates a network issue.
Power cycle the ATV and router, reboot the computer.

Add a home movie from iTunes to Movie Theater?

I have an old home movie from a few years ago that was already edited in iMovie and shared to iTunes. Now that iMovie Theater is available, I'd like to add that home movie, and others, to iMovie Theater. Is there a way to add them back? The original projects and library assets have already been deleted from iMovie.
Thanks in advance.

Hi pmpknetr21,
Welcome to the Apple Support Communities!
It sounds like you want to import previously created movies from iTunes back into iMovie. Once in iMovie, you can move projects inside of iMovie to iMovie theater.
iMovie Help: Import media on your Mac
iMovie Help: Share to iMovie Theater
Cheers,
Joe

HT1338 I would like to burn a home movie from imovie. How may I do this?

I would like to burn a home movie from imovie. How may I do this? I have imported from a viedo camera to imovie and cannot burn it to a blank dvd! ***?

Buy iDVD.
http://www.apple.com/findouthow/movies/idvd.html
With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
IDVD is easy to get. It is available on disk as part of iLife 11.
IDVD is a wonderful piece of software and well worth the low cost of $40. (works with all Mac OS 10.5 and newer.)
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Transfer home movies from mac to Apple TV

How do you transfer home movies from mac to Apple TV

You need to add them to iTunes.
How you do this depends on how you make the home movies.

I want to move my movies from itunes on the hard drive to the cloud but dont know how

I want to move my movies from itunes on the hard drive to the cloud but dont know how

Are these movies you purchased thru iTunes?

Using sdcard as home, moves from sdb1 when a usb drive is hotplugged

Similar Messages

Maybe you are looking for